# packages

pkgId: 709d5f8406282530067b4a68937d9ca8610c38aada5634065ed6749ef6b9d44c
name: acl
arch: x86_64
version: 2.2.51
epoch: 0
release: 12.el7
summary: Access control list utilities
url: http://acl.bestbits.at/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: acl-2.2.51-12.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/acl-2.2.51-12.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains the getfacl and setfacl utilities needed for
  manipulating access control lists.


pkgId: 002042e3986be9c07464146d3c33d9ccc26fa371241b5aa8b36d14d2934893a1
name: acpica-tools
arch: x86_64
version: 20150619
epoch: 0
release: 3.el7
summary: ACPICA tools for the development and debug of ACPI tables
url: https://www.acpica.org/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: acpica-tools-20150619-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/acpica-tools-20150619-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The ACPI Component Architecture (ACPICA) project provides an OS-independent
  reference implementation of the Advanced Configuration and Power Interface
  Specification (ACPI).  ACPICA code contains those portions of ACPI meant to
  be directly integrated into the host OS as a kernel-resident subsystem, and
  a small set of tools to assist in developing and debugging ACPI tables.

  This package contains only the user-space tools needed for ACPI table
  development, not the kernel implementation of ACPI.  The following commands
  are installed:
     -- iasl: compiles ASL (ACPI Source Language) into AML (ACPI Machine
        Language), suitable for inclusion as a DSDT in system firmware.
        It also can disassemble AML, for debugging purposes.
     -- acpibin: performs basic operations on binary AML files (e.g.,
        comparison, data extraction)
     -- acpidump: write out the current contents of ACPI tables
     -- acpiexec: simulate AML execution in order to debug method definitions
     -- acpihelp: display help messages describing ASL keywords and op-codes
     -- acpinames: display complete ACPI name space from input AML
     -- acpisrc: manipulate the ACPICA source tree and format source files
        for specific environments
     -- acpixtract: extract binary ACPI tables from acpidump output (see
        also the pmtools package)

  This version of the tools is being released under GPLv2 license.


pkgId: de89411e9e3066506d87e72f81d82d05a4e41b2bffe709f340267d363b6dd25d
name: arptables
arch: x86_64
version: 0.0.4
epoch: 0
release: 7.el7
summary: User space tool to set up tables of ARP rules in kernel
url: http://ebtables.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: arptables-0.0.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/arptables-0.0.4-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The arptables is a user space tool used to set up and maintain
  the tables of ARP rules in the Linux kernel. These rules inspect
  the ARP frames which they see. arptables is analogous to the iptables
  user space tool, but is less complicated.


pkgId: 87794d17d2a4be830b62e451da88175945109c0c5da34bef2dd58a36ab68f67e
name: at
arch: x86_64
version: 3.1.13
epoch: 0
release: 20.el7
summary: Job spooling tools
url: http://ftp.debian.org/debian/pool/main/a/at
rpm_license: GPLv3+ and GPLv2+ and ISC and MIT and Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: at-3.1.13-20.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/at-3.1.13-20.el7.x86_64.rpm
checksum_type: sha256
description:
  At and batch read commands from standard input or from a specified
  file. At allows you to specify that a command will be run at a
  particular time. Batch will execute commands when the system load
  levels drop to a particular level. Both commands use user's shell.

  You should install the at package if you need a utility for
  time-oriented job control. Note: If it is a recurring job that will
  need to be repeated at the same time every day/week, etc. you should
  use crontab instead.


pkgId: d58706fc85c5880f366675da21c1333b49651d2f0465db34390f904d9ad4648f
name: audit-libs
arch: x86_64
version: 2.4.1
epoch: 0
release: 5.el7
summary: Dynamic library for libaudit
url: http://people.redhat.com/sgrubb/audit/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: audit-2.4.1-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/audit-libs-2.4.1-5.el7.x86_64.rpm
checksum_type: sha256
description:
  The audit-libs package contains the dynamic libraries needed for
  applications to use the audit framework.


pkgId: 3e9a467306f99b19296929d36762e1803872a93ab77d6e348a02b518364132e1
name: autogen-libopts
arch: x86_64
version: 5.18
epoch: 0
release: 5.el7
summary: Automated option processing library based on autogen
url: http://www.gnu.org/software/autogen/
rpm_license: LGPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: autogen-5.18-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/autogen-libopts-5.18-5.el7.x86_64.rpm
checksum_type: sha256
description:
  Libopts is very powerful command line option parser consisting of a set of
  AutoGen templates and a run time library that nearly eliminates the hassle of
  parsing and documenting command line options.


pkgId: 2d6a61af9e81647c7649c67e9b927c8e61c7ce25c954cdfc6a215910cb97b2ac
name: basesystem
arch: noarch
version: 10.0
epoch: 0
release: 7.el7.centos
summary: The skeleton package which defines a simple CentOS Linux system
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: basesystem-10.0-7.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/basesystem-10.0-7.el7.centos.noarch.rpm
checksum_type: sha256
description:
  Basesystem defines the components of a basic CentOS Linux
  system (for example, the package installation order to use during
  bootstrapping). Basesystem should be in every installation of a system,
  and it should never be removed.


pkgId: e1c20e3861637879e95ce59a41720f44e1583f7b11d89449ef85c61cafe33d7b
name: bash
arch: x86_64
version: 4.2.46
epoch: 0
release: 19.el7
summary: The GNU Bourne Again shell
url: http://www.gnu.org/software/bash
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Shells
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: bash-4.2.46-19.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/bash-4.2.46-19.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU Bourne Again shell (Bash) is a shell or command language
  interpreter that is compatible with the Bourne shell (sh). Bash
  incorporates useful features from the Korn shell (ksh) and the C shell
  (csh). Most sh scripts can be run by bash without modification.


pkgId: aebfba6100223ea073e076468a41bff221fa0092f31eb3c35a54e032f82ab79e
name: bash-completion
arch: noarch
version: 2.1
epoch: 1
release: 6.el7
summary: Programmable completion for Bash
url: http://bash-completion.alioth.debian.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: bash-completion-2.1-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/bash-completion-2.1-6.el7.noarch.rpm
checksum_type: sha256
description:
  bash-completion is a collection of shell functions that take advantage
  of the programmable completion feature of bash.


pkgId: 38674e20e1b7deb9b69bd0375e7ddd4ab2fa7900080a7b4b1e02163e143d7b6f
name: bc
arch: x86_64
version: 1.06.95
epoch: 0
release: 13.el7
summary: GNU's bc (a numeric processing language) and dc (a calculator)
url: http://www.gnu.org/software/bc/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/Engineering
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: bc-1.06.95-13.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/bc-1.06.95-13.el7.x86_64.rpm
checksum_type: sha256
description:
  The bc package includes bc and dc. Bc is an arbitrary precision
  numeric processing arithmetic language. Dc is an interactive
  arbitrary precision stack based calculator, which can be used as a
  text mode calculator.

  Install the bc package if you need its number handling capabilities or
  if you would like to use its text mode calculator.


pkgId: e4eba976a22ef5c403ce25e1e1c544aaa6a18d7bbfc12b403e60c6e733290b67
name: bind-libs-lite
arch: x86_64
version: 9.9.4
epoch: 32
release: 29.el7_2.3
summary: Libraries for working with the DNS protocol
url: http://www.isc.org/products/BIND/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: bind-9.9.4-29.el7_2.3.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/bind-libs-lite-9.9.4-29.el7_2.3.x86_64.rpm
checksum_type: sha256
description:
  Contains lite version of BIND suite libraries which are used by various
  programs to work with DNS protocol.


pkgId: 399f1dfc1de7994255d25fb5f09b622571affef8c4498023c4a597ad8581d723
name: binutils
arch: x86_64
version: 2.23.52.0.1
epoch: 0
release: 55.el7
summary: A GNU collection of binary utilities
url: http://sources.redhat.com/binutils
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: binutils-2.23.52.0.1-55.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/binutils-2.23.52.0.1-55.el7.x86_64.rpm
checksum_type: sha256
description:
  Binutils is a collection of binary utilities, including ar (for
  creating, modifying and extracting from archives), as (a family of GNU
  assemblers), gprof (for displaying call graph profile data), ld (the
  GNU linker), nm (for listing symbols from object files), objcopy (for
  copying and translating object files), objdump (for displaying
  information from object files), ranlib (for generating an index for
  the contents of an archive), readelf (for displaying detailed
  information about binary files), size (for listing the section sizes
  of an object or archive file), strings (for listing printable strings
  from files), strip (for discarding symbols), and addr2line (for
  converting addresses to file and line).


pkgId: 2e7b9eee8582dab9dfda5da5f86f2dc94d2ebd134c1e41fac9dc7eb8d9c9b0e4
name: biosdevname
arch: x86_64
version: 0.3.10
epoch: 0
release: 2
summary: Helper for naming devices per BIOS names
url: http://linux.dell.com/files/biosdevname
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: biosdevname-0.3.10-2.src.rpm
location_href: Packages/biosdevname-0.3.10-2.x86_64.rpm
checksum_type: sha256
description:
  biosdevname in its simplest form takes a kernel device name as an
  argument, and returns the BIOS-given name it "should" be.  This is necessary
  on systems where the BIOS name for a given device (e.g. the label on
  the chassis is "Gb1") doesn't map directly and obviously to the kernel
  name (e.g. eth0).


pkgId: 26aadfbcc3d0cae3f3e2caa51b5060b93330db6ef16323115ce20175ed73ecea
name: blktap
arch: x86_64
version: 3.5.0
epoch: 0
release: xs.1
summary: blktap user space utilities
url: https://github.com/xapi-project/blktap
rpm_license: BSD
rpm_group: System/Hypervisor
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: blktap-3.5.0-xs.1.src.rpm
location_href: Packages/blktap-3.5.0-xs.1.x86_64.rpm
checksum_type: sha256
description:
  Blktap creates kernel block devices which realize I/O requests to
  processes implementing virtual hard disk images entirely in user
  space.

  Typical disk images may be implemented as files, in memory, or
  stored on other hosts across the network. The image drivers included
  with tapdisk can map disk I/O to sparse file images accessed through
  Linux DIO/AIO and VHD images with snapshot functionality.

  This packages includes the control utilities needed to create
  destroy and manipulate devices ('tap-ctl'), the 'tapdisk' driver
  program to perform tap devices I/O, and a number of image drivers.


pkgId: 61ac8dd5294b9d9788dfcc342fc3c14ae0cfa52423d5705c625b6ceaa1945f8d
name: boost-system
arch: x86_64
version: 1.53.0
epoch: 0
release: 25.el7
summary: Run-Time component of boost system support library
url: http://www.boost.org
rpm_license: Boost and MIT and Python
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: boost-1.53.0-25.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/boost-system-1.53.0-25.el7.x86_64.rpm
checksum_type: sha256
description:
  Run-Time component of Boost operating system support library, including
  the diagnostics support that will be part of the C++0x standard
  library.


pkgId: c876d0efec280502e73bdb444434e014ba8966eb79d70551136f6b0dd1f894d3
name: boost-thread
arch: x86_64
version: 1.53.0
epoch: 0
release: 25.el7
summary: Run-Time component of boost thread library
url: http://www.boost.org
rpm_license: Boost and MIT and Python
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: boost-1.53.0-25.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/boost-thread-1.53.0-25.el7.x86_64.rpm
checksum_type: sha256
description:
  Run-Time component Boost.Thread library, which provides classes and
  functions for managing multiple threads of execution, and for
  synchronizing data between the threads or providing separate copies of
  data specific to individual threads.


pkgId: 7f430e1846d61e711ff03dc3fcc40db0c8f4d19bc48f4fd1c58b130211d32cf2
name: bridge-utils
arch: x86_64
version: 1.5
epoch: 0
release: 9.el7
summary: Utilities for configuring the linux ethernet bridge
url: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: bridge-utils-1.5-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/bridge-utils-1.5-9.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains utilities for configuring the linux ethernet
  bridge. The linux ethernet bridge can be used for connecting multiple
  ethernet devices together. The connecting is fully transparent: hosts
  connected to one ethernet device see hosts connected to the other
  ethernet devices directly.

  Install bridge-utils if you want to use the linux ethernet bridge.


pkgId: 9d12a78942d40a85cfbee399d814eb74cb8e6ce06f504f068d25e652b3c4a45e
name: bugtool-conn-tests
arch: noarch
version: 1.1.1
epoch: 0
release: 313
summary: Plugins for the XenServer bugtool to collect connectivity information
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: xenserver-status-report-1.1.1-313.src.rpm
location_href: Packages/bugtool-conn-tests-1.1.1-313.noarch.rpm
checksum_type: sha256
description:
  The xenserver-status-report package includes extensions for XenServer's bugtool to gather info
  on the connectivity status.


pkgId: 3b755a7db6262ea47fdb5c1f2e6acec2a898709f9aa76aff93d80f9efa0bd24c
name: busybox
arch: x86_64
version: 1.22.1
epoch: 0
release: 1
summary: Busybox binary providing simplified versions of system commands
rpm_license: GPL
rpm_group: System Environment/Daemons
rpm_buildhost: 317f4e9b6e0f
rpm_sourcerpm: busybox-1.22.1-1.src.rpm
location_href: Packages/busybox-1.22.1-1.x86_64.rpm
checksum_type: sha256
description:
  Busybox is a single binary which includes versions of a large number
  of system commands, including a shell.


pkgId: a6034dcf7795c032ab675ec148b41cc1053fee6530935c5e8bbff2ec8498d485
name: bzip2
arch: x86_64
version: 1.0.6
epoch: 0
release: 13.el7
summary: A file compression utility
url: http://www.bzip.org/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/File
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: bzip2-1.0.6-13.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/bzip2-1.0.6-13.el7.x86_64.rpm
checksum_type: sha256
description:
  Bzip2 is a freely available, patent-free, high quality data compressor.
  Bzip2 compresses files to within 10 to 15 percent of the capabilities
  of the best techniques available.  However, bzip2 has the added benefit
  of being approximately two times faster at compression and six times
  faster at decompression than those techniques.  Bzip2 is not the
  fastest compression utility, but it does strike a balance between speed
  and compression capability.

  Install bzip2 if you need a compression utility.


pkgId: 60a6c7134cc95803c4623e96600ba29604d94eb50ba48c7d86bcc36486585a4d
name: ca-certificates
arch: noarch
version: 2015.2.6
epoch: 0
release: 70.1.el7_2
summary: The Mozilla CA root certificate bundle
url: http://www.mozilla.org/
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ca-certificates-2015.2.6-70.1.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ca-certificates-2015.2.6-70.1.el7_2.noarch.rpm
checksum_type: sha256
description:
  This package contains the set of CA certificates chosen by the
  Mozilla Foundation for use with the Internet PKI.


pkgId: 193b33e56ef29096a2f01ea34662c9b53b76e305733b4ce2b7e821b01561c4ab
name: centos-logos
arch: noarch
version: 70.0.6
epoch: 0
release: 3.el7.centos
summary: CentOS-related icons and pictures
url: http://www.centos.org
rpm_license: Copyright © 2014 The CentOS Project. All rights reserved.
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: centos-logos-70.0.6-3.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/centos-logos-70.0.6-3.el7.centos.noarch.rpm
checksum_type: sha256
description:
  The redhat-logos package (the "Package") contains files created by the
  CentOS Project to replace the Red Hat "Shadow Man" logo and  RPM logo.
  The Red Hat "Shadow Man" logo, RPM, and the RPM logo are trademarks or
  registered trademarks of Red Hat, Inc.

  The Package and CentOS logos (the "Marks") can only used as outlined
  in the included COPYING file. Please see that file for information on
  copying and redistribution of the CentOS Marks.


pkgId: ef33197c79609fcb3b4f280ab155791d8e72d49000f976e6523d4d38d5d7e32c
name: chkconfig
arch: x86_64
version: 1.3.61
epoch: 0
release: 5.el7
summary: A system tool for maintaining the /etc/rc*.d hierarchy
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: chkconfig-1.3.61-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/chkconfig-1.3.61-5.el7.x86_64.rpm
checksum_type: sha256
description:
  Chkconfig is a basic system utility.  It updates and queries runlevel
  information for system services.  Chkconfig manipulates the numerous
  symbolic links in /etc/rc.d, to relieve system administrators of some
  of the drudgery of manually editing the symbolic links.


pkgId: 4d1b8cd81f1fc4a3db94323db32c2f09698350e55a6c5266eb0dcc786cd6f343
name: cifs-utils
arch: x86_64
version: 6.2
epoch: 0
release: 7.el7
summary: Utilities for mounting and managing CIFS mounts
url: http://linux-cifs.samba.org/cifs-utils/
rpm_license: GPLv3
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cifs-utils-6.2-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cifs-utils-6.2-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The SMB/CIFS protocol is a standard file sharing protocol widely deployed
  on Microsoft Windows machines. This package contains tools for mounting
  shares on Linux using the SMB/CIFS protocol. The tools in this package
  work in conjunction with support in the kernel to allow one to mount a
  SMB/CIFS share onto a client and use it as if it were a standard Linux
  file system.


pkgId: 9d69dfa43373b08d74cb82a2348b54d9ab198ece024b253397a9f57cdf191ebc
name: compat-db-headers
arch: noarch
version: 4.7.25
epoch: 0
release: 28.el7
summary: The Berkeley DB database compatibility headers
url: http://www.oracle.com/database/berkeley-db/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: compat-db-4.7.25-28.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/compat-db-headers-4.7.25-28.el7.noarch.rpm
checksum_type: sha256
description:
  The Berkeley Database (Berkeley DB) is a programmatic toolkit that provides
  embedded database support for both traditional and client/server applications.
  This package contains Berkeley DB library headers used for compatibility.


pkgId: 5753d3b10b6a9714f55d8fba52546610666e25ec82130928cc294b663903a64b
name: compat-db47
arch: x86_64
version: 4.7.25
epoch: 0
release: 28.el7
summary: The Berkeley DB database 4.7.25 compatibility library
url: http://www.oracle.com/database/berkeley-db/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: compat-db-4.7.25-28.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/compat-db47-4.7.25-28.el7.x86_64.rpm
checksum_type: sha256
description:
  The Berkeley Database (Berkeley DB) is a programmatic toolkit that provides
  embedded database support for both traditional and client/server applications.
  This package contains Berkeley DB library version 4.7.25 used for compatibility.


pkgId: 0343cd91e203b870ded7605305a633b9b1c23eb26e65e19da326968c42cbb6f9
name: coreutils
arch: x86_64
version: 8.22
epoch: 0
release: 15.el7_2.1
summary: A set of basic GNU tools commonly used in shell scripts
url: http://www.gnu.org/software/coreutils/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: coreutils-8.22-15.el7_2.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/coreutils-8.22-15.el7_2.1.x86_64.rpm
checksum_type: sha256
description:
  These are the GNU core utilities.  This package is the combination of
  the old GNU fileutils, sh-utils, and textutils packages.


pkgId: 042ad2d1e30957cecb67bc7a82bec360b7f5f1223441d6d021d0775322a5f660
name: corosync
arch: x86_64
version: 2.3.4
epoch: 0
release: 7.el7_2.1
summary: The Corosync Cluster Engine and Application Programming Interfaces
url: http://www.corosync.org/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: corosync-2.3.4-7.el7_2.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/corosync-2.3.4-7.el7_2.1.x86_64.rpm
checksum_type: sha256
description:
  This package contains the Corosync Cluster Engine Executive, several default
  APIs and libraries, default configuration files, and an init script.


pkgId: 6dab78defabf7d2007e98089e7bcfa018a7cf109b02466b91597941295d87424
name: cpio
arch: x86_64
version: 2.11
epoch: 0
release: 24.el7
summary: A GNU archiving program
url: http://www.gnu.org/software/cpio/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cpio-2.11-24.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cpio-2.11-24.el7.x86_64.rpm
checksum_type: sha256
description:
  GNU cpio copies files into or out of a cpio or tar archive.  Archives
  are files which contain a collection of other files plus information
  about them, such as their file name, owner, timestamps, and access
  permissions.  The archive can be another file on the disk, a magnetic
  tape, or a pipe.  GNU cpio supports the following archive formats:  binary,
  old ASCII, new ASCII, crc, HPUX binary, HPUX old ASCII, old tar and POSIX.1
  tar.  By default, cpio creates binary format archives, so that they are
  compatible with older cpio programs.  When it is extracting files from
  archives, cpio automatically recognizes which kind of archive it is reading
  and can read archives created on machines with a different byte-order.

  Install cpio if you need a program to manage file archives.


pkgId: 72d0fe87e6a2535d4133c89fade42e5efba28067ae27eb2eead390a0e032ffae
name: cracklib
arch: x86_64
version: 2.9.0
epoch: 0
release: 11.el7
summary: A password-checking library
url: http://sourceforge.net/projects/cracklib/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cracklib-2.9.0-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cracklib-2.9.0-11.el7.x86_64.rpm
checksum_type: sha256
description:
  CrackLib tests passwords to determine whether they match certain
  security-oriented characteristics, with the purpose of stopping users
  from choosing passwords that are easy to guess. CrackLib performs
  several tests on passwords: it tries to generate words from a username
  and gecos entry and checks those words against the password; it checks
  for simplistic patterns in passwords; and it checks for the password
  in a dictionary.

  CrackLib is actually a library containing a particular C function
  which is used to check the password, as well as other C
  functions. CrackLib is not a replacement for a passwd program; it must
  be used in conjunction with an existing passwd program.

  Install the cracklib package if you need a program to check users'
  passwords to see if they are at least minimally secure. If you install
  CrackLib, you will also want to install the cracklib-dicts package.


pkgId: fdaf2dbb09ef69274061b11c17905b600e6283b5a6767cb7f022e2a8fc0bf20f
name: cracklib-dicts
arch: x86_64
version: 2.9.0
epoch: 0
release: 11.el7
summary: The standard CrackLib dictionaries
url: http://sourceforge.net/projects/cracklib/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cracklib-2.9.0-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cracklib-dicts-2.9.0-11.el7.x86_64.rpm
checksum_type: sha256
description:
  The cracklib-dicts package includes the CrackLib dictionaries.
  CrackLib will need to use the dictionary appropriate to your system,
  which is normally put in /usr/share/dict/words. Cracklib-dicts also
  contains the utilities necessary for the creation of new dictionaries.

  If you are installing CrackLib, you should also install cracklib-dicts.


pkgId: 1192ef3d13b31a419dc933ef66480d41b9d6d2b3b48fc3210405937f3f9782d5
name: cronie
arch: x86_64
version: 1.4.11
epoch: 0
release: 14.el7_2.1
summary: Cron daemon for executing programs at set times
url: https://fedorahosted.org/cronie
rpm_license: MIT and BSD and ISC and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cronie-1.4.11-14.el7_2.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cronie-1.4.11-14.el7_2.1.x86_64.rpm
checksum_type: sha256
description:
  Cronie contains the standard UNIX daemon crond that runs specified programs at
  scheduled times and related tools. It is a fork of the original vixie-cron and
  has security and configuration enhancements like the ability to use pam and
  SELinux.


pkgId: e9b28502b84ebe12fb0cd363b385192fa997ae48cb90af6f28b20d370cc75b55
name: crontabs
arch: noarch
version: 1.11
epoch: 0
release: 6.20121102git.el7
summary: Root crontab files used to schedule the execution of programs
url: https://fedorahosted.org/crontabs
rpm_license: Public Domain and GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: crontabs-1.11-6.20121102git.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/crontabs-1.11-6.20121102git.el7.noarch.rpm
checksum_type: sha256
description:
  This package is used by Fedora mainly for executing files by cron.

  The crontabs package contains root crontab files and directories.
  You will need to install cron daemon to run the jobs from the crontabs.
  The cron daemon such as cronie or fcron checks the crontab files to
  see when particular commands are scheduled to be executed.  If commands
  are scheduled, it executes them.

  Crontabs handles a basic system function, so it should be installed on
  your system.


pkgId: bd99dcdcfeff41713c54ab747c10a0fe942c4cb1798c9df7199b56751a2fa78e
name: cups-client
arch: x86_64
version: 1.6.3
epoch: 1
release: 22.el7
summary: CUPS printing system - client programs
url: http://www.cups.org/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cups-1.6.3-22.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cups-client-1.6.3-22.el7.x86_64.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. This package contains command-line client
  programs.


pkgId: e81f56c50a92e8ce50fe5ff5738b4d40f64953e94612b014a8a5c06b9dec29c3
name: cups-libs
arch: x86_64
version: 1.6.3
epoch: 1
release: 22.el7
summary: CUPS printing system - libraries
url: http://www.cups.org/
rpm_license: LGPLv2 and zlib
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cups-1.6.3-22.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cups-libs-1.6.3-22.el7.x86_64.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. It has been developed by Apple Inc.
  to promote a standard printing solution for all UNIX vendors and users.
  CUPS provides the System V and Berkeley command-line interfaces.
  The cups-libs package provides libraries used by applications to use CUPS
  natively, without needing the lp/lpr commands.


pkgId: 6051913759997031027a09b12a9087150c23d6c09ac9fb21320f7986a0d7e761
name: curl
arch: x86_64
version: 7.29.0
epoch: 0
release: 25.el7.centos
summary: A utility for getting files from remote servers (FTP, HTTP, and others)
url: http://curl.haxx.se/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: curl-7.29.0-25.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/curl-7.29.0-25.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  curl is a command line tool for transferring data with URL syntax, supporting
  FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP,
  SMTP, POP3 and RTSP.  curl supports SSL certificates, HTTP POST, HTTP PUT, FTP
  uploading, HTTP form based upload, proxies, cookies, user+password
  authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer
  resume, proxy tunneling and a busload of other useful tricks.


pkgId: 95ec4181bf5f8389a2c68dfd37aa962e3552aa7597f75e11ee199fe3999adf85
name: cyrus-sasl-lib
arch: x86_64
version: 2.1.26
epoch: 0
release: 20.el7_2
summary: Shared libraries needed by applications which use Cyrus SASL
url: http://asg.web.cmu.edu/sasl/sasl-library.html
rpm_license: BSD with advertising
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: cyrus-sasl-2.1.26-20.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/cyrus-sasl-lib-2.1.26-20.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The cyrus-sasl-lib package contains shared libraries which are needed by
  applications which use the Cyrus SASL library.


pkgId: 218ebd3fa54e5789912ff70f079c4b23b5ba44014d2506f37389e2ee05d93c91
name: dbus
arch: x86_64
version: 1.6.12
epoch: 1
release: 13.el7
summary: D-BUS message bus
url: http://www.freedesktop.org/software/dbus/
rpm_license: GPLv2+ or AFL
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: dbus-1.6.12-13.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/dbus-1.6.12-13.el7.x86_64.rpm
checksum_type: sha256
description:
  D-BUS is a system for sending messages between applications. It is
  used both for the system-wide message bus service, and as a
  per-user-login-session messaging facility.


pkgId: 454ea233701afe3aef7e694e28e51ec56f4e1cd6b9db7b855ea2a16a2a8ce1a5
name: device-mapper-multipath
arch: x86_64
version: 0.4.9
epoch: 0
release: 85.el7_2.5.xs20
summary: Tools to manage multipath devices using device-mapper
url: http://christophe.varoqui.free.fr/
rpm_license: GPL+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: device-mapper-multipath-0.4.9-85.el7_2.5.xs20.src.rpm
location_href: Packages/device-mapper-multipath-0.4.9-85.el7_2.5.xs20.x86_64.rpm
checksum_type: sha256
description:
  device-mapper-multipath provides tools to manage multipath devices by
  instructing the device-mapper multipath kernel module what to do.
  The tools are :
  * multipath - Scan the system for multipath devices and assemble them.
  * multipathd - Detects when paths fail and execs multipath to update things.


pkgId: 33aa9fcee086eb395912ab93ccee3c21975435d2303e5c3d16039c26e66892a3
name: device-mapper-multipath-libs
arch: x86_64
version: 0.4.9
epoch: 0
release: 85.el7_2.5.xs20
summary: The device-mapper-multipath modules and shared library
url: http://christophe.varoqui.free.fr/
rpm_license: GPL+
rpm_group: System Environment/Libraries
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: device-mapper-multipath-0.4.9-85.el7_2.5.xs20.src.rpm
location_href: Packages/device-mapper-multipath-libs-0.4.9-85.el7_2.5.xs20.x86_64.rpm
checksum_type: sha256
description:
  The device-mapper-multipath-libs provides the path checker
  and prioritizer modules. It also contains the multipath shared library,
  libmultipath.


pkgId: 356b936b62b7af5507ae5892b02494b7f1205ab6f9ddbb5cbacb65d37c0cc173
name: device-mapper-persistent-data
arch: x86_64
version: 0.5.5
epoch: 0
release: 1.el7
summary: Device-mapper Persistent Data Tools
url: https://github.com/jthornber/thin-provisioning-tools
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: device-mapper-persistent-data-0.5.5-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/device-mapper-persistent-data-0.5.5-1.el7.x86_64.rpm
checksum_type: sha256
description:
  thin-provisioning-tools contains check,dump,restore,repair,rmap
  and metadata_size tools to manage device-mapper thin provisioning
  target metadata devices; cache check,dump,metadata_size,restore
  and repair tools to manage device-mapper cache metadata devices
  are included and era check, dump, restore and invalidate to manage
  snapshot eras


pkgId: 5b30dfa22016d217cedb234357fe9410502622be4e4d0f40254d133baaad3e54
name: dhclient
arch: x86_64
version: 4.2.5
epoch: 12
release: 42.el7.centos
summary: Provides the ISC DHCP client daemon and dhclient-script
url: http://isc.org/products/DHCP/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: dhcp-4.2.5-42.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/dhclient-4.2.5-42.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
  individual devices on an IP network to get their own network
  configuration information (IP address, subnetmask, broadcast address,
  etc.) from a DHCP server. The overall purpose of DHCP is to make it
  easier to administer a large network.

  To use DHCP on your network, install a DHCP service (or relay agent),
  and on clients run a DHCP client daemon.  The dhclient package
  provides the ISC DHCP client daemon.


pkgId: 2d9b396e33a8c6967422d44fc55806d68725c09bfa2ce61a68b354bf12ed6086
name: dhcp-common
arch: x86_64
version: 4.2.5
epoch: 12
release: 42.el7.centos
summary: Common files used by ISC dhcp client and server
url: http://isc.org/products/DHCP/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: dhcp-4.2.5-42.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/dhcp-common-4.2.5-42.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
  individual devices on an IP network to get their own network
  configuration information (IP address, subnetmask, broadcast address,
  etc.) from a DHCP server. The overall purpose of DHCP is to make it
  easier to administer a large network.

  This package provides common files used by dhcp and dhclient package.


pkgId: 343dc6d257ab68ed14e6e3bd719d08a0206900200097f94d551e06366e0b1525
name: diffutils
arch: x86_64
version: 3.3
epoch: 0
release: 4.el7
summary: A GNU collection of diff utilities
url: http://www.gnu.org/software/diffutils/diffutils.html
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: diffutils-3.3-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/diffutils-3.3-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
  compares two files and shows the differences, line by line.  The cmp
  command shows the offset and line numbers where two files differ, or
  cmp can show the characters that differ between the two files.  The
  diff3 command shows the differences between three files.  Diff3 can be
  used when two people have made independent changes to a common
  original; diff3 can produce a merged file that contains both sets of
  changes and warnings about conflicts.  The sdiff command can be used
  to merge two files interactively.

  Install diffutils if you need to compare text files.


pkgId: 6a9fdae0ce415cb232a40a8d9acd0bb794a44ee45929293568d6da2913a3e1d3
name: dmidecode
arch: x86_64
version: 2.12
epoch: 1
release: 9.el7
summary: Tool to analyse BIOS DMI data
url: http://www.nongnu.org/dmidecode/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: dmidecode-2.12-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/dmidecode-2.12-9.el7.x86_64.rpm
checksum_type: sha256
description:
  dmidecode reports information about x86 & ia64 hardware as described in the
  system BIOS according to the SMBIOS/DMI standard. This information
  typically includes system manufacturer, model name, serial number,
  BIOS version, asset tag as well as a lot of other details of varying
  level of interest and reliability depending on the manufacturer.

  This will often include usage status for the CPU sockets, expansion
  slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of
  I/O ports (e.g. serial, parallel, USB).


pkgId: 42416436502896bf609f744e0207dfed0a0dea00ca7536f88be6dddb894195bc
name: dracut
arch: x86_64
version: 033
epoch: 0
release: 360.el7.centos.xs11
summary: Initramfs generator using udev
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: dracut-033-360.el7.centos.xs11.src.rpm
location_href: Packages/dracut-033-360.el7.centos.xs11.x86_64.rpm
checksum_type: sha256
description:
  dracut contains tools to create a bootable initramfs for 2.6 Linux kernels.
  Unlike existing implementations, dracut does hard-code as little as possible
  into the initramfs. dracut contains various modules which are driven by the
  event-based udev. Having root on MD, DM, LVM2, LUKS is supported as well as
  NFS, iSCSI, NBD, FCoE with the dracut-network package.


pkgId: e164f3ee5ecb935010ea79b2ef138955724c75c8293525f9210ed1ce2ec638c9
name: dracut-network
arch: x86_64
version: 033
epoch: 0
release: 360.el7.centos.xs11
summary: dracut modules to build a dracut initramfs with network support
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: dracut-033-360.el7.centos.xs11.src.rpm
location_href: Packages/dracut-network-033-360.el7.centos.xs11.x86_64.rpm
checksum_type: sha256
description:
  This package requires everything which is needed to build a generic
  all purpose initramfs with network support with dracut.


pkgId: 2d9f0d2751c975a7b9d2af47066434a80854716bf2573978d554e95b23c1ccf2
name: dyninst
arch: x86_64
version: 8.2.0
epoch: 0
release: 2.el7
summary: An API for Run-time Code Generation
url: http://www.dyninst.org
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: dyninst-8.2.0-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/dyninst-8.2.0-2.el7.x86_64.rpm
checksum_type: sha256
description:
  Dyninst is an Application Program Interface (API) to permit the insertion of
  code into a running program. The API also permits changing or removing
  subroutine calls from the application program. Run-time code changes are
  useful to support a variety of applications including debugging, performance
  monitoring, and to support composing applications out of existing packages.
  The goal of this API is to provide a machine independent interface to permit
  the creation of tools and applications that use run-time code patching.


pkgId: cf0a13407dac1418a517474b267bd7eeabd61e483cc2b167e2a9e75a8905e63f
name: e2fsprogs
arch: x86_64
version: 1.42.9
epoch: 0
release: 7.el7
summary: Utilities for managing ext2, ext3, and ext4 filesystems
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: e2fsprogs-1.42.9-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/e2fsprogs-1.42.9-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The e2fsprogs package contains a number of utilities for creating,
  checking, modifying, and correcting any inconsistencies in second,
  third and fourth extended (ext2/ext3/ext4) filesystems. E2fsprogs
  contains e2fsck (used to repair filesystem inconsistencies after an
  unclean shutdown), mke2fs (used to initialize a partition to contain
  an empty ext2 filesystem), debugfs (used to examine the internal
  structure of a filesystem, to manually repair a corrupted
  filesystem, or to create test cases for e2fsck), tune2fs (used to
  modify filesystem parameters), and most of the other core ext2fs
  filesystem utilities.

  You should install the e2fsprogs package if you need to manage the
  performance of an ext2, ext3, or ext4 filesystem.


pkgId: 23bb79095539d77569411769a94c6dc31482681f5736f8590d9c9ad6b8386840
name: e2fsprogs-libs
arch: x86_64
version: 1.42.9
epoch: 0
release: 7.el7
summary: Ext2/3/4 filesystem-specific shared libraries
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: e2fsprogs-1.42.9-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/e2fsprogs-libs-1.42.9-7.el7.x86_64.rpm
checksum_type: sha256
description:
  E2fsprogs-libs contains libe2p and libext2fs, the libraries of the
  e2fsprogs package.

  These libraries are used to directly acccess ext2/3/4 filesystems
  from userspace.


pkgId: a986b311888ea3da2cad3b38c1badfcaa00f15dfff25f1f4fa1a39c33217d14c
name: ebtables
arch: x86_64
version: 2.0.10
epoch: 0
release: 13.el7
summary: Ethernet Bridge frame table administration tool
url: http://ebtables.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ebtables-2.0.10-13.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ebtables-2.0.10-13.el7.x86_64.rpm
checksum_type: sha256
description:
  Ethernet bridge tables is a firewalling tool to transparently filter network
  traffic passing a bridge. The filtering possibilities are limited to link
  layer filtering and some basic filtering on higher network layers.

  This tool is the userspace control for the bridge and ebtables kernel
  components.

  The ebtables tool can be used together with the other Linux filtering tools,
  like iptables. There are no known incompatibility issues.


pkgId: c7c79265fe41f4b5f0c254db6b5a30b887cc1a960b407813366e1d4e1abc742a
name: ed
arch: x86_64
version: 1.9
epoch: 0
release: 4.el7
summary: The GNU line editor
url: http://www.gnu.org/software/ed/
rpm_license: GPLv3+, GFDL
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ed-1.9-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ed-1.9-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Ed is a line-oriented text editor, used to create, display, and modify
  text files (both interactively and via shell scripts).  For most
  purposes, ed has been replaced in normal usage by full-screen editors
  (emacs and vi, for example).

  Ed was the original UNIX editor, and may be used by some programs.  In
  general, however, you probably don't need to install it and you probably
  won't use it.


pkgId: fc5ad20afb525580977b91e1c501fda8c234d1d930e9a6bcc94d1d200d9bea32
name: efibootmgr
arch: x86_64
version: 0.8.0
epoch: 0
release: 7.el7
summary: EFI Boot Manager
url: http://github.com/vathpela/efibootmgr/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: efibootmgr-0.8.0-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/efibootmgr-0.8.0-7.el7.x86_64.rpm
checksum_type: sha256
description:
  efibootmgr displays and allows the user to edit the Intel Extensible
  Firmware Interface (EFI) Boot Manager variables.  Additional
  information about EFI can be found at
  http://developer.intel.com/technology/efi/efi.htm and http://uefi.org/.


pkgId: 36f168faadcebb9cc514f81825e9aeec3df21765c17bd98e3282075a8cb99c6f
name: elfutils
arch: x86_64
version: 0.163
epoch: 0
release: 3.el7
summary: A collection of utilities and DSOs to handle compiled objects
url: https://fedorahosted.org/elfutils/
rpm_license: GPLv3+ and (GPLv2+ or LGPLv3+)
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: elfutils-0.163-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/elfutils-0.163-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Elfutils is a collection of utilities, including stack (to show
  backtraces), nm (for listing symbols from object files), size
  (for listing the section sizes of an object or archive file),
  strip (for discarding symbols), readelf (to see the raw ELF file
  structures), and elflint (to check for well-formed ELF files).


pkgId: 2fe77eacf17d822a87f4740745542d039acb876976d2c175ebb56dd86e23bb29
name: elfutils-libelf
arch: x86_64
version: 0.163
epoch: 0
release: 3.el7
summary: Library to read and write ELF files
url: https://fedorahosted.org/elfutils/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: elfutils-0.163-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/elfutils-libelf-0.163-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The elfutils-libelf package provides a DSO which allows reading and
  writing ELF files on a high level.  Third party programs depend on
  this package to read internals of ELF files.  The programs of the
  elfutils package use it also to generate new ELF files.


pkgId: b634a699613d6053ca58b2f4728f6d3c76aadda0b61f92b61a24289d5b416e41
name: elfutils-libs
arch: x86_64
version: 0.163
epoch: 0
release: 3.el7
summary: Libraries to handle compiled objects
url: https://fedorahosted.org/elfutils/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: elfutils-0.163-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/elfutils-libs-0.163-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The elfutils-libs package contains libraries which implement DWARF, ELF,
  and machine-specific ELF handling.  These libraries are used by the programs
  in the elfutils package.  The elfutils-devel package enables building
  other programs using these libraries.


pkgId: 0d99757cdb6784e9c837bccc64447faa4b73f3d9d8afa4b5303f503719a111c2
name: elxocmcore
arch: x86_64
version: 11.1.218.4
epoch: 0
release: 1
summary: Remote Management Host Bus Adapter Application.
url: www.avagotech.com
rpm_license: Copyright 2009-2016 Avago Technologies. All rights reserved.
rpm_vendor: Avago Technologies
rpm_group: Applications/System
rpm_buildhost: cmscmctx129885c.emulex.com
rpm_sourcerpm: elxocmcore-11.1.218.4-1.src.rpm
location_href: Packages/elxocmcore-11.1.218.4-1.x86_64.rpm
checksum_type: sha256
description:
  Remote Management Host Bus Adapter Application.
  This application allows the remote management of multiple HBAs
  across a SAN.
  This application provides the OCManager Command Line Interface.


pkgId: 36ba79ecc931b1dabcdfa0999a48df40ff6751dfe51db3b9623692d21da0d12a
name: elxocmcorelibs
arch: x86_64
version: 11.1.218.4
epoch: 0
release: 1
summary: Remote Management Host Bus Adapter Application.
url: www.avagotech.com
rpm_license: Copyright 2013-2016 Avago Technologies. All rights reserved.
rpm_vendor: Avago Technologies
rpm_group: Applications/System
rpm_buildhost: cmscmctx129885c.emulex.com
rpm_sourcerpm: elxocmcorelibs-11.1.218.4-1.src.rpm
location_href: Packages/elxocmcorelibs-11.1.218.4-1.x86_64.rpm
checksum_type: sha256
description:
  Remote Management Host Bus Adapter Application.
  This application allows the remote management of multiple HBAs
  across a SAN.
  This application provides the OCManager libdfc and libemulexhbaapi libraries.


pkgId: 596d30804d29346eb10b19d7cb27eb01b176ea55901f3bdd137e011804aa35c5
name: elxocmlibhbaapi
arch: x86_64
version: 11.1.218.4
epoch: 0
release: 1
summary: Remote Management Host Bus Adapter Application.
url: www.avagotech.com
rpm_license: Copyright 2009-2016 Avago Technologies. All rights reserved.
rpm_vendor: Avago Technologies
rpm_group: Applications/System
rpm_buildhost: cmscmctx129885c.emulex.com
rpm_sourcerpm: elxocmlibhbaapi-11.1.218.4-1.src.rpm
location_href: Packages/elxocmlibhbaapi-11.1.218.4-1.x86_64.rpm
checksum_type: sha256
description:
  Remote Management Host Bus Adapter Application.
  This application allows the remote management of multiple HBAs
  across a SAN.
  This application provides the OCManager HBAAPI library.


pkgId: 858d6b7bd596ca38819f7d80b67b3b103c71a6b051a5a6940ece717ffb2a269a
name: ethtool
arch: x86_64
version: 3.15
epoch: 2
release: 2.el7
summary: Settings tool for Ethernet NICs
url: http://ftp.kernel.org/pub/software/network/ethtool/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ethtool-3.15-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ethtool-3.15-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This utility allows querying and changing settings such as speed,
  port, auto-negotiation, PCI locations and checksum offload on many
  network devices, especially of Ethernet devices.


pkgId: 68bc2c64e93c34c921740794353a347fbd0cd5c870dd550a8bfefd6f94b13a14
name: expat
arch: x86_64
version: 2.1.0
epoch: 0
release: 8.el7
summary: An XML parser library
url: http://www.libexpat.org/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: expat-2.1.0-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/expat-2.1.0-8.el7.x86_64.rpm
checksum_type: sha256
description:
  This is expat, the C library for parsing XML, written by James Clark. Expat
  is a stream oriented XML parser. This means that you register handlers with
  the parser prior to starting the parse. These handlers are called when the
  parser discovers the associated structures in the document being parsed. A
  start tag is an example of the kind of structures for which you may
  register handlers.


pkgId: 9e5b406f49f9728f9e84511da6f6277ec6501e4c0ae180c8319efeb88d92eff1
name: expect
arch: x86_64
version: 5.45
epoch: 0
release: 14.el7_1
summary: A program-script interaction and testing utility
url: http://expect.nist.gov/
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: expect-5.45-14.el7_1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/expect-5.45-14.el7_1.x86_64.rpm
checksum_type: sha256
description:
  Expect is a tcl application for automating and testing
  interactive applications such as telnet, ftp, passwd, fsck,
  rlogin, tip, etc. Expect makes it easy for a script to
  control another program and interact with it.

  This package contains expect and some scripts that use it.


pkgId: 6ea47639b78aafcc1e24768a0b8d55698360485cf18cfbbc137c771e922690f9
name: fcoe-utils
arch: x86_64
version: 1.0.30
epoch: 0
release: 3.git91c0c8c.el7.centos.xs8
summary: Fibre Channel over Ethernet utilities
url: http://www.open-fcoe.org
rpm_license: GPLv2
rpm_group: Applications/System
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: fcoe-utils-1.0.30-3.git91c0c8c.el7.centos.xs8.src.rpm
location_href: Packages/fcoe-utils-1.0.30-3.git91c0c8c.el7.centos.xs8.x86_64.rpm
checksum_type: sha256
description:
  Fibre Channel over Ethernet utilities
  fcoeadm - command line tool for configuring FCoE interfaces
  fcoemon - service to configure DCB Ethernet QOS filters, works with lldpad


pkgId: 3d4820c69f03d119ef41ba57386fac1e317ef45dc5d287950d5838974c5e9b8e
name: file
arch: x86_64
version: 5.11
epoch: 0
release: 31.el7
summary: A utility for determining file types
url: http://www.darwinsys.com/file/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/File
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: file-5.11-31.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/file-5.11-31.el7.x86_64.rpm
checksum_type: sha256
description:
  The file command is used to identify a particular file according to the
  type of data contained by the file.  File can identify many different
  file types, including ELF binaries, system libraries, RPM packages, and
  different graphics formats.


pkgId: 8d74e4aebab4bd319f360de0b93e6e1dee89da4b13b3e0fdcee6dc041f6aca47
name: filesystem
arch: x86_64
version: 3.2
epoch: 0
release: 20.el7
summary: The basic directory layout for a Linux system
url: https://fedorahosted.org/filesystem
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: filesystem-3.2-20.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/filesystem-3.2-20.el7.x86_64.rpm
checksum_type: sha256
description:
  The filesystem package is one of the basic packages that is installed
  on a Linux system. Filesystem contains the basic directory layout
  for a Linux operating system, including the correct permissions for
  the directories.


pkgId: 3fc459c18fef6dfa64795ed908435a1ce1adf332313bd28fc6f3bc48c539f504
name: findutils
arch: x86_64
version: 4.5.11
epoch: 1
release: 5.el7
summary: The GNU versions of find utilities (find and xargs)
url: http://www.gnu.org/software/findutils/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/File
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: findutils-4.5.11-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/findutils-4.5.11-5.el7.x86_64.rpm
checksum_type: sha256
description:
  The findutils package contains programs which will help you locate
  files on your system.  The find utility searches through a hierarchy
  of directories looking for files which match a certain set of criteria
  (such as a file name pattern).  The xargs utility builds and executes
  command lines from standard input arguments (usually lists of file
  names generated by the find command).

  You should install findutils because it includes tools that are very
  useful for finding things on your system.


pkgId: 32058b81e77baa19ea30d39782dec8d9a7bd75e9fc4c7b736c736b57792f4d28
name: fipscheck
arch: x86_64
version: 1.4.1
epoch: 0
release: 5.el7
summary: A library for integrity verification of FIPS validated modules
url: http://fedorahosted.org/fipscheck/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: fipscheck-1.4.1-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/fipscheck-1.4.1-5.el7.x86_64.rpm
checksum_type: sha256
description:
  FIPSCheck is a library for integrity verification of FIPS validated
  modules. The package also provides helper binaries for creation and
  verification of the HMAC-SHA256 checksum files.


pkgId: 0f5996cdf6a2f2718fd02c88ac9bba304a3ab01d4723e1bcbdfbd5cf54f731f1
name: fontpackages-filesystem
arch: noarch
version: 1.44
epoch: 0
release: 8.el7
summary: Directories used by font packages
url: http://fedoraproject.org/wiki/fontpackages
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: Development/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: fontpackages-1.44-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/fontpackages-filesystem-1.44-8.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains the basic directory layout used by font packages,
  including the correct permissions for the directories.


pkgId: 0d859089e34cee23cda2f0bf34643d9709331225a51c0ca2f5f87a8329b0a8eb
name: forkexecd
arch: x86_64
version: 1.1.0
epoch: 0
release: 2.el7.centos
summary: A subprocess management service
url: https://github.com/xapi-project/forkexecd
rpm_license: LGPL
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: forkexecd-1.1.0-2.el7.centos.src.rpm
location_href: Packages/forkexecd-1.1.0-2.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  A service which starts and manages subprocesses, avoiding the need to manually
  fork() and exec() in a multithreaded program.


pkgId: 9d747b0f69af0dab74e6566064af8549959ed449527ef231d4de6c128c0df639
name: freetype
arch: x86_64
version: 2.4.11
epoch: 0
release: 11.el7
summary: A free and portable font rendering engine
url: http://www.freetype.org
rpm_license: (FTL or GPLv2+) and BSD and MIT and Public Domain and zlib with acknowledgement
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: freetype-2.4.11-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/freetype-2.4.11-11.el7.x86_64.rpm
checksum_type: sha256
description:
  The FreeType engine is a free and portable font rendering
  engine, developed to provide advanced font support for a variety of
  platforms and environments. FreeType is a library which can open and
  manages font files as well as efficiently load, hint and render
  individual glyphs. FreeType is not a font server or a complete
  text-rendering library.


pkgId: 4154e1a31d394b29096dc254f88b18446c99de56e8bbb3ca09f370a4ca6b2a0e
name: gawk
arch: x86_64
version: 4.0.2
epoch: 0
release: 4.el7
summary: The GNU version of the awk text processing utility
url: http://www.gnu.org/software/gawk/gawk.html
rpm_license: GPLv3+ and GPL and LGPLv3+ and LGPL and BSD
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gawk-4.0.2-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gawk-4.0.2-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The gawk package contains the GNU version of awk, a text processing
  utility. Awk interprets a special-purpose programming language to do
  quick and easy text pattern matching and reformatting jobs.

  Install the gawk package if you need a text processing utility. Gawk is
  considered to be a standard Linux tool for processing text.


pkgId: bd42b069bae88bd89f8aedfa30f3478245e299f8441959bce4cfdcf1a4494be6
name: gdbm
arch: x86_64
version: 1.10
epoch: 0
release: 8.el7
summary: A GNU set of database routines which use extensible hashing
url: http://www.gnu.org/software/gdbm/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gdbm-1.10-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gdbm-1.10-8.el7.x86_64.rpm
checksum_type: sha256
description:
  Gdbm is a GNU database indexing library, including routines which use
  extensible hashing.  Gdbm works in a similar way to standard UNIX dbm
  routines.  Gdbm is useful for developers who write C applications and
  need access to a simple and efficient database or who are building C
  applications which will use such a database.

  If you're a C developer and your programs need access to simple
  database routines, you should install gdbm.  You'll also need to
  install gdbm-devel.


pkgId: a29ee512377b725b4b4ec7f5e7b36ba88abd66c0350c0571b3864db1d27d54c5
name: gdisk
arch: x86_64
version: 0.8.6
epoch: 0
release: 5.el7
summary: An fdisk-like partitioning tool for GPT disks
url: http://www.rodsbooks.com/gdisk/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gdisk-0.8.6-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gdisk-0.8.6-5.el7.x86_64.rpm
checksum_type: sha256
description:
  An fdisk-like partitioning tool for GPT disks. GPT fdisk features a
  command-line interface, fairly direct manipulation of partition table
  structures, recovery tools to help you deal with corrupt partition
  tables, and the ability to convert MBR disks to GPT format.


pkgId: 334419d778f25a551f1799738f074ce31d77b7ede5a80fe78af0c99d51db8e10
name: gettext
arch: x86_64
version: 0.18.2.1
epoch: 0
release: 4.el7
summary: GNU libraries and utilities for producing multi-lingual messages
url: http://www.gnu.org/software/gettext/
rpm_license: GPLv3+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gettext-0.18.2.1-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gettext-0.18.2.1-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU gettext package provides a set of tools and documentation for
  producing multi-lingual messages in programs. Tools include a set of
  conventions about how programs should be written to support message
  catalogs, a directory and file naming organization for the message
  catalogs, a runtime library which supports the retrieval of translated
  messages, and stand-alone programs for handling the translatable and
  the already translated strings. Gettext provides an easy to use
  library and tools for creating, using, and modifying natural language
  catalogs and is a powerful and simple method for internationalizing
  programs.


pkgId: 940717cadbc6a580b5b657e6bda40c7f39dff87dc17ec680ba61d97b5607bcf8
name: gfs2-utils
arch: x86_64
version: 3.1.8
epoch: 0
release: 6.el7
summary: Utilities for managing the global file system (GFS2)
url: https://fedorahosted.org/cluster/wiki/HomePage
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Kernel
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gfs2-utils-3.1.8-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gfs2-utils-3.1.8-6.el7.x86_64.rpm
checksum_type: sha256
description:
  The gfs2-utils package contains a number of utilities for creating,
  checking, modifying, and correcting any inconsistencies in GFS2
  file systems.


pkgId: b0686eac266de72474090cc0c4fd4863fb8e8d928b70f6f09ddf5a58beb43539
name: glib2
arch: x86_64
version: 2.42.2
epoch: 0
release: 5.el7
summary: A library of handy utility functions
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: glib2-2.42.2-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/glib2-2.42.2-5.el7.x86_64.rpm
checksum_type: sha256
description:
  GLib is the low-level core library that forms the basis for projects
  such as GTK+ and GNOME. It provides data structure handling for C,
  portability wrappers, and interfaces for such runtime functionality
  as an event loop, threads, dynamic loading, and an object system.


pkgId: 344bb8d28ba7fa92d6ddd6991d883b907afeb97ae7ea9a498b4391988019bd5f
name: glibc
arch: x86_64
version: 2.17
epoch: 0
release: 106.el7_2.4
summary: The GNU libc libraries
url: http://www.gnu.org/software/glibc/
rpm_license: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: glibc-2.17-106.el7_2.4.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/glibc-2.17-106.el7_2.4.x86_64.rpm
checksum_type: sha256
description:
  The glibc package contains standard libraries which are used by
  multiple programs on the system. In order to save disk space and
  memory, as well as to make upgrading easier, common system code is
  kept in one place and shared between programs. This particular package
  contains the most important sets of shared libraries: the standard C
  library and the standard math library. Without these two libraries, a
  Linux system will not function.


pkgId: e6bc76147c13c6a118074bd9374e525bcdf091cd25c8e703c043bdb3f47b35ac
name: glibc-common
arch: x86_64
version: 2.17
epoch: 0
release: 106.el7_2.4
summary: Common binaries and locale data for glibc
url: http://www.gnu.org/software/glibc/
rpm_license: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: glibc-2.17-106.el7_2.4.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/glibc-common-2.17-106.el7_2.4.x86_64.rpm
checksum_type: sha256
description:
  The glibc-common package includes common binaries for the GNU libc
  libraries, as well as national language (locale) support.


pkgId: 37934816c5394b918aac961789c24d51af717cd08c9932a6ce4caf60a6726578
name: gmp
arch: x86_64
version: 6.0.0
epoch: 1
release: 12.el7_1
summary: A GNU arbitrary precision library
url: http://gmplib.org/
rpm_license: LGPLv3+ or GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gmp-6.0.0-12.el7_1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gmp-6.0.0-12.el7_1.x86_64.rpm
checksum_type: sha256
description:
  The gmp package contains GNU MP, a library for arbitrary precision
  arithmetic, signed integers operations, rational numbers and floating
  point numbers. GNU MP is designed for speed, for both small and very
  large operands. GNU MP is fast because it uses fullwords as the basic
  arithmetic type, it uses fast algorithms, it carefully optimizes
  assembly code for many CPUs' most common inner loops, and it generally
  emphasizes speed over simplicity/elegance in its operations.

  Install the gmp package if you need a fast arbitrary precision
  library.


pkgId: 27c312c47fecf404b4752361849213d6cc7fd5d28d18d6a3da5d596e5568d9d8
name: gnu-free-fonts-common
arch: noarch
version: 20120503
epoch: 0
release: 8.el7
summary: Common files for freefont (documentation…)
url: http://www.gnu.org/software/freefont/
rpm_license: GPLv3+ with exceptions
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gnu-free-fonts-20120503-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gnu-free-fonts-common-20120503-8.el7.noarch.rpm
checksum_type: sha256
description:
  Gnu FreeFont is a free family of scalable outline fonts, suitable for general
  use on computers and for desktop publishing. It is Unicode-encoded for
  compatibility with all modern operating systems.

  Besides a full set of characters for writing systems based on the Latin
  alphabet, FreeFont contains large selection of characters from other writing
  systems some of which are hard to find elsewhere.

  FreeFont also contains a large set of symbol characters, both technical and
  decorative. We are especially pleased with the Mathematical Operators range,
  with which most of the glyphs used in LaTeX can be displayed.

  This package consists of files used by other gnu-free-fonts packages.


pkgId: c3c78d1b80f5fefa1b7d98b61f3653338396fd9ac30be41f63452f623a90ba48
name: gnu-free-sans-fonts
arch: noarch
version: 20120503
epoch: 0
release: 8.el7
summary: GNU FreeFont Sans-Serif Font
url: http://www.gnu.org/software/freefont/
rpm_license: GPLv3+ with exceptions
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gnu-free-fonts-20120503-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gnu-free-sans-fonts-20120503-8.el7.noarch.rpm
checksum_type: sha256
description:
  Gnu FreeFont is a free family of scalable outline fonts, suitable for general
  use on computers and for desktop publishing. It is Unicode-encoded for
  compatibility with all modern operating systems.

  Besides a full set of characters for writing systems based on the Latin
  alphabet, FreeFont contains large selection of characters from other writing
  systems some of which are hard to find elsewhere.

  FreeFont also contains a large set of symbol characters, both technical and
  decorative. We are especially pleased with the Mathematical Operators range,
  with which most of the glyphs used in LaTeX can be displayed.

  This package contains the GNU FreeFont sans-serif font.


pkgId: 3db5eae034f8379d246bea37fcdc9e60115a2622f8f2534e32d5ded289e85bea
name: gnupg2
arch: x86_64
version: 2.0.22
epoch: 0
release: 3.el7
summary: Utility for secure communication and data storage
url: http://www.gnupg.org/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gnupg2-2.0.22-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gnupg2-2.0.22-3.el7.x86_64.rpm
checksum_type: sha256
description:
  GnuPG is GNU's tool for secure communication and data storage.  It can
  be used to encrypt data and to create digital signatures.  It includes
  an advanced key management facility and is compliant with the proposed
  OpenPGP Internet standard as described in RFC2440 and the S/MIME
  standard as described by several RFCs.

  GnuPG 2.0 is a newer version of GnuPG with additional support for
  S/MIME.  It has a different design philosophy that splits
  functionality up into several modules. The S/MIME and smartcard functionality
  is provided by the gnupg2-smime package.


pkgId: 7269bd3d42b11c28afffdaed0211018005b3ef3d8cf2f8cdbde812fabeeb7acd
name: gnutls
arch: x86_64
version: 3.3.8
epoch: 0
release: 14.el7_2
summary: A TLS protocol implementation
url: http://www.gnutls.org/
rpm_license: GPLv3+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gnutls-3.3.8-14.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gnutls-3.3.8-14.el7_2.x86_64.rpm
checksum_type: sha256
description:
  GnuTLS is a secure communications library implementing the SSL, TLS and DTLS
  protocols and technologies around them. It provides a simple C language
  application programming interface (API) to access the secure communications
  protocols as well as APIs to parse and write X.509, PKCS #12, OpenPGP and
  other required structures.


pkgId: de328fe85ea92e9b12aa1fe241f5a14a3c7f341f61ffd6d8d7d7393ccff31649
name: gpgme
arch: x86_64
version: 1.3.2
epoch: 0
release: 5.el7
summary: GnuPG Made Easy - high level crypto API
url: http://www.gnupg.org/related_software/gpgme/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gpgme-1.3.2-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gpgme-1.3.2-5.el7.x86_64.rpm
checksum_type: sha256
description:
  GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG
  easier for applications.  It provides a high-level crypto API for
  encryption, decryption, signing, signature verification and key
  management.


pkgId: 85b8f8699e97f3932033b35c0df754f647c1e82d80987ca36e13d5d622f743bb
name: grep
arch: x86_64
version: 2.20
epoch: 0
release: 2.el7
summary: Pattern matching utilities
url: http://www.gnu.org/software/grep/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: grep-2.20-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/grep-2.20-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU versions of commonly used grep utilities. Grep searches through
  textual input for lines which contain a match to a specified pattern and then
  prints the matching lines. GNU's grep utilities include grep, egrep and fgrep.

  GNU grep is needed by many scripts, so it shall be installed on every system.


pkgId: 024018ec2676b92a1f53f78a4a3be479de7a6ab94068deb72645c6e33073a306
name: groff-base
arch: x86_64
version: 1.22.2
epoch: 0
release: 8.el7
summary: Parts of the groff formatting system required to display manual pages
url: http://www.gnu.org/software/groff/
rpm_license: GPLv3+ and GFDL and BSD and MIT
rpm_vendor: CentOS
rpm_group: Applications/Publishing
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: groff-1.22.2-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/groff-base-1.22.2-8.el7.x86_64.rpm
checksum_type: sha256
description:
  The groff-base package contains only necessary parts of groff formatting
  system which are required to display manual pages, and the groff's default
  display device (PostScript).


pkgId: ee36e503d141d91e830a7b456bebbe39492474d97d938151676db5c523968bf9
name: grub
arch: x86_64
version: 2.02
epoch: 1
release: 1.xs17
summary: Bootloader with support for Linux, Multiboot and more
url: http://www.gnu.org/software/grub/
rpm_license: GPLv3+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: grub-2.02-1.xs17.src.rpm
location_href: Packages/grub-2.02-1.xs17.x86_64.rpm
checksum_type: sha256
description:
  The GRand Unified Bootloader (GRUB) is a highly configurable and customizable
  bootloader with modular architecture.  It support rich varietyof kernel formats,
  file systems, computer architectures and hardware devices.  This subpackage
  provides support for PC BIOS systems.


pkgId: 4e6103cffc37a2ee8472c37cba59e6be9fa8ced88eb7963c3de00b6d57f5f8e8
name: grub-efi
arch: x86_64
version: 2.02
epoch: 1
release: 1.xs17
summary: GRUB for EFI systems.
url: http://www.gnu.org/software/grub/
rpm_license: GPLv3+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: grub-2.02-1.xs17.src.rpm
location_href: Packages/grub-efi-2.02-1.xs17.x86_64.rpm
checksum_type: sha256
description:
  The GRand Unified Bootloader (GRUB) is a highly configurable and customizable
  bootloader with modular architecture.  It support rich varietyof kernel formats,
  file systems, computer architectures and hardware devices.  This subpackage
  provides support for EFI systems.


pkgId: 854658ed21ebc3041206a336afabf3ce7ccb9f1c15915fdfad92ce7bb5922e58
name: grub-tools
arch: x86_64
version: 2.02
epoch: 1
release: 1.xs17
summary: Support tools for GRUB.
url: http://www.gnu.org/software/grub/
rpm_license: GPLv3+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: grub-2.02-1.xs17.src.rpm
location_href: Packages/grub-tools-2.02-1.xs17.x86_64.rpm
checksum_type: sha256
description:
  The GRand Unified Bootloader (GRUB) is a highly configurable and customizable
  bootloader with modular architecture.  It support rich varietyof kernel formats,
  file systems, computer architectures and hardware devices.  This subpackage
  provides tools for support of all platforms.


pkgId: 409c3e337e1e8746d3bea66381eb0d1c53b3213bc34005fab5fd687dfa3f80ac
name: grubby
arch: x86_64
version: 8.28
epoch: 0
release: 17.el7
summary: Command line tool for updating bootloader configs
url: http://git.fedorahosted.org/git/grubby.git
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: grubby-8.28-17.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/grubby-8.28-17.el7.x86_64.rpm
checksum_type: sha256
description:
  grubby  is  a command line tool for updating and displaying information about
  the configuration files for the grub, lilo, elilo (ia64),  yaboot (powerpc)
  and zipl (s390) boot loaders. It is primarily designed to be used from scripts
  which install new kernels and need to find information about the current boot
  environment.


pkgId: b902aad221bf3d815d1e4e71bb460dc908424f889a3dd887ccbf8c7ad9b9a282
name: gzip
arch: x86_64
version: 1.5
epoch: 0
release: 8.el7
summary: The GNU data compression program
url: http://www.gzip.org/
rpm_license: GPLv3+ and GFDL
rpm_vendor: CentOS
rpm_group: Applications/File
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gzip-1.5-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/gzip-1.5-8.el7.x86_64.rpm
checksum_type: sha256
description:
  The gzip package contains the popular GNU gzip data compression
  program. Gzipped files have a .gz extension.

  Gzip should be installed on your system, because it is a
  very commonly used data compression program.


pkgId: 2ad7d1120c22c2c992b3b1fa5fd054a61269dcd41753a07048f0bc66cda869ef
name: hardlink
arch: x86_64
version: 1.0
epoch: 1
release: 19.el7
summary: Create a tree of hardlinks
url: http://pkgs.fedoraproject.org/gitweb/?p=hardlink.git
rpm_license: GPL+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: hardlink-1.0-19.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/hardlink-1.0-19.el7.x86_64.rpm
checksum_type: sha256
description:
  hardlink is used to create a tree of hard links.
  It's used by kernel installation to dramatically reduce the
  amount of diskspace used by each kernel package installed.


pkgId: 7f4b2562033be3d25ba626ec2788c1ad9297856810b7d389dc2e216e9925e642
name: hdparm
arch: x86_64
version: 9.43
epoch: 0
release: 5.el7
summary: A utility for displaying and/or setting hard disk parameters
url: http://sourceforge.net/projects/hdparm/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: hdparm-9.43-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/hdparm-9.43-5.el7.x86_64.rpm
checksum_type: sha256
description:
  Hdparm is a useful system utility for setting (E)IDE hard drive
  parameters.  For example, hdparm can be used to tweak hard drive
  performance and to spin down hard drives for power conservation.


pkgId: f8cce9cb44f28dd824cc07c4b00795c11d210b7d693bad897babccfdc527a966
name: hostname
arch: x86_64
version: 3.13
epoch: 0
release: 3.el7
summary: Utility to set/show the host name or domain name
url: http://packages.qa.debian.org/h/hostname.html
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: hostname-3.13-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/hostname-3.13-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides commands which can be used to display the system's
  DNS name, and to display or set its hostname or NIS domain name.


pkgId: c5fc9a28487e68d114007a8ff7d9165d5085a21b21b972920f2babbcf54b88ac
name: hwdata
arch: x86_64
version: 0.252
epoch: 0
release: 8.1.el7
summary: Hardware identification and configuration data
url: http://git.fedorahosted.org/git/hwdata.git
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: hwdata-0.252-8.1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/hwdata-0.252-8.1.el7.x86_64.rpm
checksum_type: sha256
description:
  hwdata contains various hardware identification and configuration data,
  such as the pci.ids and usb.ids databases.


pkgId: a808ab38a616e05e742efddcc528c9d30ab0614fb0cf4ddc4a494566c8ab9ae2
name: info
arch: x86_64
version: 5.1
epoch: 0
release: 4.el7
summary: A stand-alone TTY-based reader for GNU texinfo documentation
url: http://www.gnu.org/software/texinfo/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: texinfo-5.1-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/info-5.1-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU project uses the texinfo file format for much of its
  documentation. The info package provides a standalone TTY-based
  browser program for viewing texinfo files.


pkgId: 8ccd242033cfd022906fdb526d827278f5c27f77a15cc8e507f34fe7981d78a7
name: initscripts
arch: x86_64
version: 9.49.30
epoch: 0
release: 1.el7_2.2
summary: The inittab file and the /etc/init.d scripts
url: http://fedorahosted.org/releases/i/n/initscripts/
rpm_license: GPLv2 and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: initscripts-9.49.30-1.el7_2.2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/initscripts-9.49.30-1.el7_2.2.x86_64.rpm
checksum_type: sha256
description:
  The initscripts package contains basic system scripts used
  during a boot of the system. It also contains scripts which
  activate and deactivate most network interfaces.


pkgId: f0e087678c7200f429676c2d051c9a21f65cb6ce668dd6d13b6fd72c5acd23ff
name: interface-rename
arch: noarch
version: 2.0.1
epoch: 0
release: 41
summary: A program that rename network interfaces to keep them consistent
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: interface-rename-2.0.1-41.src.rpm
location_href: Packages/interface-rename-2.0.1-41.noarch.rpm
checksum_type: sha256
description:
  The interface-rename package rename network interfaces in order to keep consistent
  naming while moving or replacing cards on the machine.


pkgId: ef2550504467636c0c4679245dc18614f8cfe88e54d7805173999c4ebd5484c0
name: ipmitool
arch: x86_64
version: 1.8.13
epoch: 0
release: 8.el7_1
summary: Utility for IPMI control
url: http://ipmitool.sourceforge.net/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ipmitool-1.8.13-8.el7_1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ipmitool-1.8.13-8.el7_1.x86_64.rpm
checksum_type: sha256
description:
  This package contains a utility for interfacing with devices that support
  the Intelligent Platform Management Interface specification.  IPMI is
  an open standard for machine health, inventory, and remote power control.

  This utility can communicate with IPMI-enabled devices through either a
  kernel driver such as OpenIPMI or over the RMCP LAN protocol defined in
  the IPMI specification.  IPMIv2 adds support for encrypted LAN
  communications and remote Serial-over-LAN functionality.

  It provides commands for reading the Sensor Data Repository (SDR) and
  displaying sensor values, displaying the contents of the System Event
  Log (SEL), printing Field Replaceable Unit (FRU) information, reading and
  setting LAN configuration, and chassis power control.


pkgId: 1562a022545deddd96b7eb07f8303220962de2ad3008c3cd6fbfc936c2f8c86b
name: iproute
arch: x86_64
version: 3.10.0
epoch: 0
release: 54.el7
summary: Advanced IP routing and network device configuration tools
url: http://kernel.org/pub/linux/utils/net/iproute2/
rpm_license: GPLv2+ and Public Domain
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: iproute-3.10.0-54.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/iproute-3.10.0-54.el7.x86_64.rpm
checksum_type: sha256
description:
  The iproute package contains networking utilities (ip and rtmon, for example)
  which are designed to use the advanced networking capabilities of the Linux
  2.4.x and 2.6.x kernel.


pkgId: 41b8616db54e513c708e53136c8c7c4726423502498a931c5b276cf4f81acf44
name: ipset
arch: x86_64
version: 6.19
epoch: 0
release: 4.el7
summary: Manage Linux IP sets
url: http://ipset.netfilter.org/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ipset-6.19-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ipset-6.19-4.el7.x86_64.rpm
checksum_type: sha256
description:
  IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel, which can be
  administered by the ipset utility. Depending on the type, currently an IP set
  may store IP addresses, (TCP/UDP) port numbers or IP addresses with MAC
  addresses in a way, which ensures lightning speed when matching an entry
  against a set.

  If you want to:
   - store multiple IP addresses or port numbers and match against the collection
     by iptables at one swoop;
   - dynamically update iptables rules against IP addresses or ports without
     performance penalty;
   - express complex IP address and ports based rulesets with one single iptables
     rule and benefit from the speed of IP sets
  then ipset may be the proper tool for you.


pkgId: 4060dc10e4a72f73bf56a6851e7c0bdadd7cb0cec10218648db34a78de49be1e
name: iptables
arch: x86_64
version: 1.4.21
epoch: 0
release: 16.el7
summary: Tools for managing Linux kernel packet filtering capabilities
url: http://www.netfilter.org/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: iptables-1.4.21-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/iptables-1.4.21-16.el7.x86_64.rpm
checksum_type: sha256
description:
  The iptables utility controls the network packet filtering code in the
  Linux kernel. If you need to set up firewalls and/or IP masquerading,
  you should install this package.


pkgId: 6814f864c2faf8eab7f22dc360426ece310cb67b71e9092ba28a5d93559f801a
name: iptables-services
arch: x86_64
version: 1.4.21
epoch: 0
release: 16.el7
summary: iptables and ip6tables services for iptables
url: http://www.netfilter.org/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: iptables-1.4.21-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/iptables-services-1.4.21-16.el7.x86_64.rpm
checksum_type: sha256
description:
  iptables services for IPv4 and IPv6

  This package provides the services iptables and ip6tables that have been split
  out of the base package since they are not active by default anymore.


pkgId: 121892c6273810cd9c6ce99bfb8e69f4048ab5c55216d95b63657cd0da3d5aec
name: iputils
arch: x86_64
version: 20121221
epoch: 0
release: 7.el7
summary: Network monitoring tools including ping
url: http://www.skbuff.net/iputils
rpm_license: BSD and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: iputils-20121221-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/iputils-20121221-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The iputils package contains basic utilities for monitoring a network,
  including ping. The ping command sends a series of ICMP protocol
  ECHO_REQUEST packets to a specified network host to discover whether
  the target machine is alive and receiving network traffic.


pkgId: adb5535ee087b885a5af20d7440bffb127ebfa7b3137235a50a1dcb329fa6a66
name: irqbalance
arch: x86_64
version: 1.0.7
epoch: 3
release: 5.el7.centos.xs9
summary: IRQ balancing daemon
url: https://github.com/Irqbalance/irqbalance
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: irqbalance-1.0.7-5.el7.centos.xs9.src.rpm
location_href: Packages/irqbalance-1.0.7-5.el7.centos.xs9.x86_64.rpm
checksum_type: sha256
description:
  irqbalance is a daemon that evenly distributes IRQ load across
  multiple CPUs for enhanced performance.


pkgId: 7c43c23f374c52f673dbadfcc902175959efd35ed7800f81c3cd4db872dfca00
name: iscsi-initiator-utils
arch: x86_64
version: 6.2.0.873
epoch: 0
release: 32.el7
summary: iSCSI daemon and utility programs
url: http://www.open-iscsi.org
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: iscsi-initiator-utils-6.2.0.873-32.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/iscsi-initiator-utils-6.2.0.873-32.el7.x86_64.rpm
checksum_type: sha256
description:
  The iscsi package provides the server daemon for the iSCSI protocol,
  as well as the utility programs used to manage it. iSCSI is a protocol
  for distributed disk access using SCSI commands sent over Internet
  Protocol networks.


pkgId: a4edc56fe742fb8422ed561bc09bfa22ab8b0966aa9fcc0ee3018017df15b519
name: iscsi-initiator-utils-iscsiuio
arch: x86_64
version: 6.2.0.873
epoch: 0
release: 32.el7
summary: Userspace configuration daemon required for some iSCSI hardware
url: http://www.open-iscsi.org
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: iscsi-initiator-utils-6.2.0.873-32.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/iscsi-initiator-utils-iscsiuio-6.2.0.873-32.el7.x86_64.rpm
checksum_type: sha256
description:
  The iscsiuio configuration daemon provides network configuration help
  for some iSCSI offload hardware.


pkgId: 1843bbb84527b0870c8ce74686934873639308cdc3b5745dd6d2acd3e5ec738a
name: json-c
arch: x86_64
version: 0.11
epoch: 0
release: 4.el7_0
summary: A JSON implementation in C
url: https://github.com/json-c/json-c/wiki
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: json-c-0.11-4.el7_0.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/json-c-0.11-4.el7_0.x86_64.rpm
checksum_type: sha256
description:
  JSON-C implements a reference counting object model that allows you to easily
  construct JSON objects in C, output them as JSON formatted strings and parse
  JSON formatted strings back into the C representation of JSON objects.


pkgId: 52f1cba7e2e0f38cd0e4358b3886ff4e601bc43187b0c9fc476028ae45981d6e
name: kbd
arch: x86_64
version: 1.15.5
epoch: 0
release: 11.el7
summary: Tools for configuring the console (keyboard, virtual terminals, etc.)
url: http://ftp.altlinux.org/pub/people/legion/kbd
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: kbd-1.15.5-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/kbd-1.15.5-11.el7.x86_64.rpm
checksum_type: sha256
description:
  The kbd package contains tools for managing a Linux
  system's console's behavior, including the keyboard, the screen
  fonts, the virtual terminals and font files.


pkgId: 287e69bf3e70654542616a424f7a126b3b3b08c9566a9d31ea01ce8d2c5d9eb3
name: kbd-legacy
arch: noarch
version: 1.15.5
epoch: 0
release: 11.el7
summary: Legacy data for kbd package
url: http://ftp.altlinux.org/pub/people/legion/kbd
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: kbd-1.15.5-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/kbd-legacy-1.15.5-11.el7.noarch.rpm
checksum_type: sha256
description:
  The kbd-legacy package contains original keymaps for kbd package.
  Please note that kbd-legacy is not helpful without kbd.


pkgId: 42e790906c7f25acdaa62bd9ebc7a472665fa619f8533de8c619cc9deab0fe43
name: kbd-misc
arch: noarch
version: 1.15.5
epoch: 0
release: 11.el7
summary: Data for kbd package
url: http://ftp.altlinux.org/pub/people/legion/kbd
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: kbd-1.15.5-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/kbd-misc-1.15.5-11.el7.noarch.rpm
checksum_type: sha256
description:
  The kbd-misc package contains data for kbd package - console fonts,
  keymaps etc. Please note that kbd-misc is not helpful without kbd.


pkgId: 0d293cf0772ba653dacd058d06869b4e6f64e16cf46f185b034682bab23728ef
name: keyutils
arch: x86_64
version: 1.5.8
epoch: 0
release: 3.el7
summary: Linux Key Management Utilities
url: http://people.redhat.com/~dhowells/keyutils/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: keyutils-1.5.8-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/keyutils-1.5.8-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Utilities to control the kernel key management facility and to provide
  a mechanism by which the kernel call back to user space to get a key
  instantiated.


pkgId: add2f2f24d21a71207ac95b229e70d761af601e968a4f61d4769842245c4cee0
name: kmod
arch: x86_64
version: 20
epoch: 0
release: 5.el7
summary: Linux kernel module management utilities
url: http://git.kernel.org/?p=utils/kernel/kmod/kmod.git;a=summary
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Kernel
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: kmod-20-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/kmod-20-5.el7.x86_64.rpm
checksum_type: sha256
description:
  The kmod package provides various programs needed for automatic
  loading and unloading of modules under 2.6, 3.x, and later kernels, as well
  as other module management programs. Device drivers and filesystems are two
  examples of loaded and unloaded modules.


pkgId: d6a9a8fa2c1e5573d6c611316e2374a6cce35a960c26aee873fccc25de98d9f5
name: kmod-libs
arch: x86_64
version: 20
epoch: 0
release: 5.el7
summary: Libraries to handle kernel module loading and unloading
url: http://git.kernel.org/?p=utils/kernel/kmod/kmod.git;a=summary
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: kmod-20-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/kmod-libs-20-5.el7.x86_64.rpm
checksum_type: sha256
description:
  The kmod-libs package provides runtime libraries for any application that
  wishes to load or unload Linux kernel modules from the running system.


pkgId: cba22cc5e824fa4c8f78871fc9088daff83622dd32516801487716eaf5fb29ce
name: kpatch
arch: x86_64
version: 0.3.2
epoch: 0
release: 3
summary: kernel patch manager
url: https://github.com/dynup/kpatch
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: kpatch-0.3.2-3.src.rpm
location_href: Packages/kpatch-0.3.2-3.x86_64.rpm
checksum_type: sha256
description:
  kpatch is a dynamic kernel patch module manager.  It allows the user to
  manage a collection of binary kernel patch modules which can be used to
  dynamically patch the kernel without rebooting.


pkgId: 67894528b78fc32a582e4650fc464803625f68d1df42f423972e2fb87bbab444
name: kpatch-4.4.0+2-modules
arch: x86_64
version: 0.3.2
epoch: 0
release: 3
summary: kpatch kernel modules
url: https://github.com/dynup/kpatch
rpm_license: GPLv2
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: kpatch-0.3.2-3.src.rpm
location_href: Packages/kpatch-4.4.0+2-modules-0.3.2-3.x86_64.rpm
checksum_type: sha256
description:
  kpatch core module for the Linux Kernel version 4.4.0+2. The
  core module provides the generic kernel patching infrastructure.


pkgId: 0a89bf67d5c28a988871bd244c630a2e56d394eb8d0d7be39eb77b4e55b0c47b
name: krb5-libs
arch: x86_64
version: 1.13.2
epoch: 0
release: 12.el7_2
summary: The shared libraries used by Kerberos 5
url: http://web.mit.edu/kerberos/www/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: krb5-1.13.2-12.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/krb5-libs-1.13.2-12.el7_2.x86_64.rpm
checksum_type: sha256
description:
  Kerberos is a network authentication system. The krb5-libs package
  contains the shared libraries needed by Kerberos 5. If you are using
  Kerberos, you need to install this package.


pkgId: e0f296918b85270a4e3f0b53f97e7ac71359b8bc0d2fa69df7932690982daf93
name: less
arch: x86_64
version: 458
epoch: 0
release: 9.el7
summary: A text file browser similar to more, but better
url: http://www.greenwoodsoftware.com/less/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: less-458-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/less-458-9.el7.x86_64.rpm
checksum_type: sha256
description:
  The less utility is a text file browser that resembles more, but has
  more capabilities.  Less allows you to move backwards in the file as
  well as forwards.  Since less doesn't have to read the entire input file
  before it starts, less starts up more quickly than text editors (for
  example, vi).

  You should install less because it is a basic utility for viewing text
  files, and you'll use it frequently.


pkgId: 88faa8c666841ac022292a49380bdefe63aa33590bb5b8b8179a442b98fe2a1a
name: libacl
arch: x86_64
version: 2.2.51
epoch: 0
release: 12.el7
summary: Dynamic library for access control list support
url: http://acl.bestbits.at/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: acl-2.2.51-12.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libacl-2.2.51-12.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains the libacl.so dynamic library which contains
  the POSIX 1003.1e draft standard 17 functions for manipulating access
  control lists.


pkgId: 2367ccd7c8473b3e91d2adcf02f7bfa8f9e4a3fa5a8f59b219bc890756897d5a
name: libaio
arch: x86_64
version: 0.3.109
epoch: 0
release: 13.el7
summary: Linux-native asynchronous I/O access library
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libaio-0.3.109-13.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libaio-0.3.109-13.el7.x86_64.rpm
checksum_type: sha256
description:
  The Linux-native asynchronous I/O facility ("async I/O", or "aio") has a
  richer API and capability set than the simple POSIX async I/O facility.
  This library, libaio, provides the Linux-native API for async I/O.
  The POSIX async I/O facility requires this library in order to provide
  kernel-accelerated async I/O capabilities, as do applications which
  require the Linux-native async I/O API.


pkgId: 5a339728c37c2a58295f0479ce24df1044820790e117d2aafe56eaa98fa5a9d2
name: libarchive
arch: x86_64
version: 3.1.2
epoch: 0
release: 7.el7
summary: A library for handling streaming archive formats
url: http://www.libarchive.org/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libarchive-3.1.2-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libarchive-3.1.2-7.el7.x86_64.rpm
checksum_type: sha256
description:
  Libarchive is a programming library that can create and read several different
  streaming archive formats, including most popular tar variants, several cpio
  formats, and both BSD and GNU ar variants. It can also write shar archives and
  read ISO9660 CDROM images and ZIP archives.


pkgId: f333ab8c1a9a77a3170951840eaeaa84c406770e5680a9a35f45ca009bc8d9e1
name: libattr
arch: x86_64
version: 2.4.46
epoch: 0
release: 12.el7
summary: Dynamic library for extended attribute support
url: http://acl.bestbits.at/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: attr-2.4.46-12.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libattr-2.4.46-12.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains the libattr.so dynamic library which contains
  the extended attribute system calls and library functions.


pkgId: a053f32a6e0e0578aed58dbd02778fc47bf62836574d2c9f3c9f44447d7ea3fb
name: libcgroup
arch: x86_64
version: 0.41
epoch: 0
release: 8.el7
summary: Library to control and monitor control groups
url: http://libcg.sourceforge.net/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libcgroup-0.41-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libcgroup-0.41-8.el7.x86_64.rpm
checksum_type: sha256
description:
  Control groups infrastructure. The library helps manipulate, control,
  administrate and monitor control groups and the associated controllers.


pkgId: 96b437b59e20eaa797ac07b39450daeb7eec88b39dd1b3609aa6c2f475ff01ff
name: libcgroup-tools
arch: x86_64
version: 0.41
epoch: 0
release: 8.el7
summary: Command-line utility programs, services and daemons for libcgroup
url: http://libcg.sourceforge.net/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libcgroup-0.41-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libcgroup-tools-0.41-8.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains command-line programs, services and a daemon for
  manipulating control groups using the libcgroup library.


pkgId: 937ccfb8b49ea369b01438b68693b8c7de79a07b1de9aa9c0a0187a2e454e333
name: libcom_err
arch: x86_64
version: 1.42.9
epoch: 0
release: 7.el7
summary: Common error description library
url: http://e2fsprogs.sourceforge.net/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: e2fsprogs-1.42.9-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libcom_err-1.42.9-7.el7.x86_64.rpm
checksum_type: sha256
description:
  This is the common error description library, part of e2fsprogs.

  libcom_err is an attempt to present a common error-handling mechanism.


pkgId: 3c9cc320c5ca336b4fb28d593ad5168a02d2b0ecd8ffb5438cc29ee2beabdf2e
name: libconfig
arch: x86_64
version: 1.4.9
epoch: 0
release: 5.el7
summary: C/C++ configuration file library
url: http://www.hyperrealm.com/libconfig/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libconfig-1.4.9-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libconfig-1.4.9-5.el7.x86_64.rpm
checksum_type: sha256
description:
  Libconfig is a simple library for manipulating structured configuration
  files. This file format is more compact and more readable than XML. And
  unlike XML, it is type-aware, so it is not necessary to do string parsing
  in application code.


pkgId: d01991773f8e0d143f55f097b78c0e5acf0a9ae022424be06f02013fcd0c7108
name: libcurl
arch: x86_64
version: 7.29.0
epoch: 0
release: 25.el7.centos
summary: A library for getting files from web servers
url: http://curl.haxx.se/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: curl-7.29.0-25.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libcurl-7.29.0-25.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  libcurl is a free and easy-to-use client-side URL transfer library, supporting
  FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP,
  SMTP, POP3 and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP PUT,
  FTP uploading, HTTP form based upload, proxies, cookies, user+password
  authentication (Basic, Digest, NTLM, Negotiate, Kerberos4), file transfer
  resume, http proxy tunneling and more.


pkgId: 000fdb5724ccde5a5bec98f3fdb8dda743ed520a241329b6b1554970c9eb4c24
name: libdb
arch: x86_64
version: 5.3.21
epoch: 0
release: 19.el7
summary: The Berkeley DB database library for C
url: http://www.oracle.com/database/berkeley-db/
rpm_license: BSD and LGPLv2 and Sleepycat
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libdb-5.3.21-19.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libdb-5.3.21-19.el7.x86_64.rpm
checksum_type: sha256
description:
  The Berkeley Database (Berkeley DB) is a programmatic toolkit that
  provides embedded database support for both traditional and
  client/server applications. The Berkeley DB includes B+tree, Extended
  Linear Hashing, Fixed and Variable-length record access methods,
  transactions, locking, logging, shared memory caching, and database
  recovery. The Berkeley DB supports C, C++, Java, and Perl APIs. It is
  used by many applications, including Python and Perl, so this should
  be installed on all systems.


pkgId: 75394dbcc5c72f0d52781a7ce3c836d1fc7fb197e32bced2e19738a50785e970
name: libdb-utils
arch: x86_64
version: 5.3.21
epoch: 0
release: 19.el7
summary: Command line tools for managing Berkeley DB databases
url: http://www.oracle.com/database/berkeley-db/
rpm_license: BSD and LGPLv2 and Sleepycat
rpm_vendor: CentOS
rpm_group: Applications/Databases
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libdb-5.3.21-19.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libdb-utils-5.3.21-19.el7.x86_64.rpm
checksum_type: sha256
description:
  The Berkeley Database (Berkeley DB) is a programmatic toolkit that
  provides embedded database support for both traditional and
  client/server applications. Berkeley DB includes B+tree, Extended
  Linear Hashing, Fixed and Variable-length record access methods,
  transactions, locking, logging, shared memory caching, and database
  recovery. DB supports C, C++, Java and Perl APIs.


pkgId: de7e4737ee863b517074d60930fcebf3fa617a5ba217131f1aff2f33feb32c9f
name: libdwarf
arch: x86_64
version: 20130207
epoch: 0
release: 4.el7
summary: Library to access the DWARF Debugging file format
url: http://reality.sgiweb.org/davea/dwarf.html
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libdwarf-20130207-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libdwarf-20130207-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Library to access the DWARF debugging file format which supports
  source level debugging of a number of procedural languages, such as C, C++,
  and Fortran.  Please see http://www.dwarfstd.org for DWARF specification.


pkgId: c3d7460baeba7b16644a1a2f0eb7ea9a84356d6351f6875a877e4b7158b9edb9
name: libedit
arch: x86_64
version: 3.0
epoch: 0
release: 12.20121213cvs.el7
summary: The NetBSD Editline library
url: http://www.thrysoee.dk/editline/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libedit-3.0-12.20121213cvs.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libedit-3.0-12.20121213cvs.el7.x86_64.rpm
checksum_type: sha256
description:
  Libedit is an autotool- and libtoolized port of the NetBSD Editline library.
  It provides generic line editing, history, and tokenization functions, similar
  to those found in GNU Readline.


pkgId: 227e79eb3804887fbcff8cda64dcfb2a410662c40a2563cac233eb7a03ede8a1
name: libevent
arch: x86_64
version: 2.0.21
epoch: 0
release: 4.el7
summary: Abstract asynchronous event notification library
url: http://sourceforge.net/projects/levent/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libevent-2.0.21-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libevent-2.0.21-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The libevent API provides a mechanism to execute a callback function
  when a specific event occurs on a file descriptor or after a timeout
  has been reached. libevent is meant to replace the asynchronous event
  loop found in event driven network servers. An application just needs
  to call event_dispatch() and can then add or remove events dynamically
  without having to change the event loop.


pkgId: dfe5c2718e017b0288edcf328cdef6aca2b4516bea36293dc3a6a1aeafac3ed4
name: libffi
arch: x86_64
version: 3.0.13
epoch: 0
release: 16.el7
summary: A portable foreign function interface library
url: http://sourceware.org/libffi
rpm_license: MIT and Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libffi-3.0.13-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libffi-3.0.13-16.el7.x86_64.rpm
checksum_type: sha256
description:
  Compilers for high level languages generate code that follow certain
  conventions.  These conventions are necessary, in part, for separate
  compilation to work.  One such convention is the "calling convention".
  The calling convention is a set of assumptions made by the compiler
  about where function arguments will be found on entry to a function.  A
  calling convention also specifies where the return value for a function
  is found.

  Some programs may not know at the time of compilation what arguments
  are to be passed to a function.  For instance, an interpreter may be
  told at run-time about the number and types of arguments used to call a
  given function.  `Libffi' can be used in such programs to provide a
  bridge from the interpreter program to compiled code.

  The `libffi' library provides a portable, high level programming
  interface to various calling conventions.  This allows a programmer to
  call any function specified by a call interface description at run time.

  FFI stands for Foreign Function Interface.  A foreign function
  interface is the popular name for the interface that allows code
  written in one language to call code written in another language.  The
  `libffi' library really only provides the lowest, machine dependent
  layer of a fully featured foreign function interface.  A layer must
  exist above `libffi' that handles type conversions for values passed
  between the two languages.


pkgId: 1f3eeb7efd387703d98e697c705bf69ff80190fffbb627141e9fe4a6efa517bf
name: libgcc
arch: x86_64
version: 4.8.5
epoch: 0
release: 4.el7
summary: GCC version 4.8 shared support library
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: gcc-4.8.5-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libgcc-4.8.5-4.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains GCC shared support library which is needed
  e.g. for exception handling support.


pkgId: 64d078793817629c5b42f5f001c60a2186cd8f7b6753bab6c0d55e2200bd786a
name: libgcrypt
arch: x86_64
version: 1.5.3
epoch: 0
release: 12.el7_1.1
summary: A general-purpose cryptography library
url: http://www.gnupg.org/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libgcrypt-1.5.3-12.el7_1.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libgcrypt-1.5.3-12.el7_1.1.x86_64.rpm
checksum_type: sha256
description:
  Libgcrypt is a general purpose crypto library based on the code used
  in GNU Privacy Guard.  This is a development version.


pkgId: 06e9c8b1442380c24851b169c9c87576b0406277f0a1fe657e1f7eebd1ece483
name: libgpg-error
arch: x86_64
version: 1.12
epoch: 0
release: 3.el7
summary: Library for error values used by GnuPG components
url: ftp://ftp.gnupg.org/gcrypt/libgpg-error/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libgpg-error-1.12-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libgpg-error-1.12-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This is a library that defines common error values for all GnuPG
  components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
  pinentry, SmartCard Daemon and possibly more in the future.


pkgId: 511609b55c3266cf4de703270ae46821c9389de834fdd37cbfed95ab4f1dea5f
name: libicu
arch: x86_64
version: 50.1.2
epoch: 0
release: 15.el7
summary: International Components for Unicode - libraries
url: http://www.icu-project.org/
rpm_license: MIT and UCD and Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: icu-50.1.2-15.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libicu-50.1.2-15.el7.x86_64.rpm
checksum_type: sha256
description:
  The International Components for Unicode (ICU) libraries provide
  robust and full-featured Unicode services on a wide variety of
  platforms. ICU supports the most current version of the Unicode
  standard, and they provide support for supplementary Unicode
  characters (needed for GB 18030 repertoire support).
  As computing environments become more heterogeneous, software
  portability becomes more important. ICU lets you produce the same
  results across all the various platforms you support, without
  sacrificing performance. It offers great flexibility to extend and
  customize the supplied services.


pkgId: 4f3bb93cd0871339c3c333b2bc24bfe760ee2a729cead23a8a767d553335c086
name: libidn
arch: x86_64
version: 1.28
epoch: 0
release: 4.el7
summary: Internationalized Domain Name support library
url: http://www.gnu.org/software/libidn/
rpm_license: LGPLv2+ and GPLv3+ and GFDL
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libidn-1.28-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libidn-1.28-4.el7.x86_64.rpm
checksum_type: sha256
description:
  GNU Libidn is an implementation of the Stringprep, Punycode and
  IDNA specifications defined by the IETF Internationalized Domain
  Names (IDN) working group, used for internationalized domain
  names.


pkgId: e19f59e54398a67e9a871d341a429304b2d8f1167f0255fb6d89a9acd4f1aab9
name: libldb
arch: x86_64
version: 1.1.20
epoch: 0
release: 1.el7_2.2
summary: A schema-less, ldap like, API and database
url: http://ldb.samba.org/
rpm_license: LGPLv3+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libldb-1.1.20-1.el7_2.2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libldb-1.1.20-1.el7_2.2.x86_64.rpm
checksum_type: sha256
description:
  An extensible library that implements an LDAP like API to access remote LDAP
  servers, or use local tdb databases.


pkgId: 64904af7b8656a8591a7d1b7e0ac7208ac98d2eae028322b9d8941d4986c160c
name: libmnl
arch: x86_64
version: 1.0.3
epoch: 0
release: 7.el7
summary: A minimalistic Netlink library
url: http://netfilter.org/projects/libmnl
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libmnl-1.0.3-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libmnl-1.0.3-7.el7.x86_64.rpm
checksum_type: sha256
description:
  libmnl is a minimalistic user-space library oriented to Netlink developers.
  There are a lot of common tasks in parsing, validating, constructing of both
  the Netlink header and TLVs that are repetitive and easy to get wrong.
  This library aims to provide simple helpers that allows you to re-use code and
  to avoid re-inventing the wheel.


pkgId: 0bd1dceb8d4490d73c07021666aa2cb327f673794273a3f8671133f40b0a23d8
name: libnetfilter_conntrack
arch: x86_64
version: 1.0.4
epoch: 0
release: 2.el7
summary: Netfilter conntrack userspace library
url: http://netfilter.org
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libnetfilter_conntrack-1.0.4-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libnetfilter_conntrack-1.0.4-2.el7.x86_64.rpm
checksum_type: sha256
description:
  libnetfilter_conntrack is a userspace library providing a programming
  interface (API) to the in-kernel connection tracking state table.


pkgId: abd022681d2959b2c7a35f0ad2d82d08048780c8bdd60ed1e0054839d8abcadb
name: libnfnetlink
arch: x86_64
version: 1.0.1
epoch: 0
release: 4.el7
summary: Netfilter netlink userspace library
url: http://netfilter.org
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libnfnetlink-1.0.1-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libnfnetlink-1.0.1-4.el7.x86_64.rpm
checksum_type: sha256
description:
  libnfnetlink is a userspace library that provides some low-level
  nfnetlink handling functions.  It is used as a foundation for other, netfilter
  subsystem specific libraries such as libnfnetlink_conntrack, libnfnetlink_log
  and libnfnetlink_queue.


pkgId: 918cdcdf951641d1abdcf82039dcd65ca874def3de32a3aec684341cf4ac524e
name: libnl
arch: x86_64
version: 1.1.4
epoch: 0
release: 3.el7
summary: Convenience library for kernel netlink sockets
url: http://www.infradead.org/~tgr/libnl/
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libnl-1.1.4-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libnl-1.1.4-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains a convenience library to simplify
  using the Linux kernel's netlink sockets interface for
  network manipulation


pkgId: 058a534006844f0c7121e00b5cc95ec2f0f3008b30f8dfce1d6f606bb03c2c07
name: libpcap
arch: x86_64
version: 1.5.3
epoch: 14
release: 8.el7
summary: A system-independent interface for user-level packet capture
url: http://www.tcpdump.org
rpm_license: BSD with advertising
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libpcap-1.5.3-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libpcap-1.5.3-8.el7.x86_64.rpm
checksum_type: sha256
description:
  Libpcap provides a portable framework for low-level network
  monitoring.  Libpcap can provide network statistics collection,
  security monitoring and network debugging.  Since almost every system
  vendor provides a different interface for packet capture, the libpcap
  authors created this system-independent API to ease in porting and to
  alleviate the need for several system-dependent packet capture modules
  in each application.

  Install libpcap if you need to do low-level network traffic monitoring
  on your network.


pkgId: 6ad7c60bf5a1931528eb1ece840d878fddddc4555ba53221877d957755adb935
name: libpipeline
arch: x86_64
version: 1.2.3
epoch: 0
release: 3.el7
summary: A pipeline manipulation library
url: http://libpipeline.nongnu.org/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libpipeline-1.2.3-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libpipeline-1.2.3-3.el7.x86_64.rpm
checksum_type: sha256
description:
  libpipeline is a C library for setting up and running pipelines of
  processes, without needing to involve shell command-line parsing which is
  often error-prone and insecure. This alleviates programmers of the need to
  laboriously construct pipelines using lower-level primitives such as fork(2)
  and execve(2).


pkgId: a1fe23fd2486751fa17b1bd9c4072dd2a963ab868fd773ace53eb57496a2283a
name: libpng
arch: x86_64
version: 1.5.13
epoch: 2
release: 7.el7_2
summary: A library of functions for manipulating PNG image format files
url: http://www.libpng.org/pub/png/
rpm_license: zlib
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libpng-1.5.13-7.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libpng-1.5.13-7.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The libpng package contains a library of functions for creating and
  manipulating PNG (Portable Network Graphics) image format files.  PNG
  is a bit-mapped graphics format similar to the GIF format.  PNG was
  created to replace the GIF format, since GIF uses a patented data
  compression algorithm.

  Libpng should be installed if you need to manipulate PNG format image
  files.


pkgId: 1b4b4f6f436bb472daf034964f01172b2155d6bbdf20e677acdabc30d3a0b0ff
name: libpwquality
arch: x86_64
version: 1.2.3
epoch: 0
release: 4.el7
summary: A library for password generation and password quality checking
url: http://libpwquality.fedorahosted.org/
rpm_license: BSD or GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libpwquality-1.2.3-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libpwquality-1.2.3-4.el7.x86_64.rpm
checksum_type: sha256
description:
  This is a library for password quality checks and generation
  of random passwords that pass the checks.
  This library uses the cracklib and cracklib dictionaries
  to perform some of the checks.


pkgId: 3b3b9febc4ea8d658a258a16b9151d0925ffb61a3322dc3ea2ac320107533217
name: libselinux
arch: x86_64
version: 2.2.2
epoch: 0
release: 6.el7
summary: SELinux library and simple utilities
url: http://oss.tresys.com/git/selinux.git
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libselinux-2.2.2-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libselinux-2.2.2-6.el7.x86_64.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  libselinux provides an API for SELinux applications to get and set
  process and file security contexts and to obtain security policy
  decisions.  Required for any applications that use the SELinux API.


pkgId: ddde7fd8cec63b881168d086468f98e34b3a851694a3c9202e1cf25e9bb10078
name: libsemanage
arch: x86_64
version: 2.1.10
epoch: 0
release: 18.el7
summary: SELinux binary policy manipulation library
url: http://oss.tresys.com/git/selinux.git
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libsemanage-2.1.10-18.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libsemanage-2.1.10-18.el7.x86_64.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  libsemanage provides an API for the manipulation of SELinux binary policies.
  It is used by checkpolicy (the policy compiler) and similar tools, as well
  as by programs like load_policy that need to perform specific transformations
  on binary policies such as customizing policy boolean settings.


pkgId: a71d809d2807e6293b266fd394c8c30099f6b3b321ed109bab8460f3ee8854b4
name: libsepol
arch: x86_64
version: 2.1.9
epoch: 0
release: 3.el7
summary: SELinux binary policy manipulation library
url: http://www.selinuxproject.org
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libsepol-2.1.9-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libsepol-2.1.9-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  libsepol provides an API for the manipulation of SELinux binary policies.
  It is used by checkpolicy (the policy compiler) and similar tools, as well
  as by programs like load_policy that need to perform specific transformations
  on binary policies such as customizing policy boolean settings.


pkgId: 3e27232d7d867c8d3850adaff14e5f6e483be7fa1f1973e1845c38c94f080723
name: libss
arch: x86_64
version: 1.42.9
epoch: 0
release: 7.el7
summary: Command line interface parsing library
url: http://e2fsprogs.sourceforge.net/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: e2fsprogs-1.42.9-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libss-1.42.9-7.el7.x86_64.rpm
checksum_type: sha256
description:
  This is libss, a command line interface parsing library, part of e2fsprogs.

  This package includes a tool that parses a command table to generate
  a simple command-line interface parser, the include files needed to
  compile and use it.

  It was originally inspired by the Multics SubSystem library.


pkgId: 83bba4701829c1c759f117e3691aec69c9b446447e77637a09f1d96c3729acb3
name: libssh2
arch: x86_64
version: 1.4.3
epoch: 0
release: 10.el7_2.1
summary: A library implementing the SSH2 protocol
url: http://www.libssh2.org/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libssh2-1.4.3-10.el7_2.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libssh2-1.4.3-10.el7_2.1.x86_64.rpm
checksum_type: sha256
description:
  libssh2 is a library implementing the SSH2 protocol as defined by
  Internet Drafts: SECSH-TRANS(22), SECSH-USERAUTH(25),
  SECSH-CONNECTION(23), SECSH-ARCH(20), SECSH-FILEXFER(06)*,
  SECSH-DHGEX(04), and SECSH-NUMBERS(10).


pkgId: 13e44916a38fb22b130ec9ca6aa193b4427c894aecff2de8988d0bb31a671a3c
name: libtasn1
arch: x86_64
version: 3.8
epoch: 0
release: 2.el7
summary: The ASN.1 library used in GNUTLS
url: http://www.gnu.org/software/libtasn1/
rpm_license: GPLv3+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libtasn1-3.8-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libtasn1-3.8-2.el7.x86_64.rpm
checksum_type: sha256
description:
  A library that provides Abstract Syntax Notation One (ASN.1, as specified
  by the X.680 ITU-T recommendation) parsing and structures management, and
  Distinguished Encoding Rules (DER, as per X.690) encoding and decoding functions.


pkgId: e9971d4e168746efe4ef82703bd8d69263c78ec1dbe829d896f1d681f16526a0
name: libtevent
arch: x86_64
version: 0.9.25
epoch: 0
release: 1.el7
summary: The tevent library
url: http://tevent.samba.org/
rpm_license: LGPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libtevent-0.9.25-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libtevent-0.9.25-1.el7.x86_64.rpm
checksum_type: sha256
description:
  Tevent is an event system based on the talloc memory management library.
  Tevent has support for many event types, including timers, signals, and
  the classic file descriptor events.
  Tevent also provide helpers to deal with asynchronous code providing the
  tevent_req (Tevent Request) functions.


pkgId: 3c7997766577d911cedc81f59d89fff73490b5ff37f587e26311c97932c875d0
name: libtirpc
arch: x86_64
version: 0.2.4
epoch: 0
release: 0.6.el7
summary: Transport Independent RPC Library
url: http://nfsv4.bullopensource.org/
rpm_license: SISSL and BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libtirpc-0.2.4-0.6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libtirpc-0.2.4-0.6.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains SunLib's implementation of transport-independent
  RPC (TI-RPC) documentation.  This library forms a piece of the base of
  Open Network Computing (ONC), and is derived directly from the
  Solaris 2.3 source.

  TI-RPC is an enhanced version of TS-RPC that requires the UNIX System V
  Transport Layer Interface (TLI) or an equivalent X/Open Transport Interface
  (XTI).  TI-RPC is on-the-wire compatible with the TS-RPC, which is supported
  by almost 70 vendors on all major operating systems.  TS-RPC source code
  (RPCSRC 4.0) remains available from several internet sites.


pkgId: 25900d33b64a33a22a1f7809b6a1ab4444ffba8c3448920c7107f44dfc73b287
name: libunistring
arch: x86_64
version: 0.9.3
epoch: 0
release: 9.el7
summary: GNU Unicode string library
url: http://www.gnu.org/software/libunistring/
rpm_license: LGPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libunistring-0.9.3-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libunistring-0.9.3-9.el7.x86_64.rpm
checksum_type: sha256
description:
  This portable C library implements Unicode string types in three flavours:
  (UTF-8, UTF-16, UTF-32), together with functions for character processing
  (names, classifications, properties) and functions for string processing
  (iteration, formatted output, width, word breaks, line breaks, normalization,
  case folding and regular expressions).


pkgId: 58e882ecac0a5a3f0ad03ba930054a24e3d42577266bdc335bd3ae54a083a464
name: libusbx
arch: x86_64
version: 1.0.15
epoch: 0
release: 4.el7
summary: Library for accessing USB devices
url: http://sourceforge.net/apps/mediawiki/libusbx/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libusbx-1.0.15-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libusbx-1.0.15-4.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides a way for applications to access USB devices.

  Libusbx is a fork of the original libusb, which is a fully API and ABI
  compatible drop in for the libusb-1.0.9 release. The libusbx fork was
  started by most of the libusb-1.0 developers, after the original libusb
  project did not produce a new release for over 18 months.

  Note that this library is not compatible with the original libusb-0.1 series,
  if you need libusb-0.1 compatibility install the libusb package.


pkgId: a2c15804bf3e9b452d476a4da5e80d4a39b5f2d1789ccb20c7002dd2088622c2
name: libuser
arch: x86_64
version: 0.60
epoch: 0
release: 7.el7_1
summary: A user and group account administration library
url: https://fedorahosted.org/libuser/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libuser-0.60-7.el7_1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libuser-0.60-7.el7_1.x86_64.rpm
checksum_type: sha256
description:
  The libuser library implements a standardized interface for manipulating
  and administering user and group accounts.  The library uses pluggable
  back-ends to interface to its data sources.

  Sample applications modeled after those included with the shadow password
  suite are included.


pkgId: 31a9cd59fb7f488a6de178096bed6029ca014301021010e077dbfa86e6f7e977
name: libutempter
arch: x86_64
version: 1.1.6
epoch: 0
release: 4.el7
summary: A privileged helper for utmp/wtmp updates
url: ftp://ftp.altlinux.org/pub/people/ldv/utempter
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libutempter-1.1.6-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libutempter-1.1.6-4.el7.x86_64.rpm
checksum_type: sha256
description:
  This library provides interface for terminal emulators such as
  screen and xterm to record user sessions to utmp and wtmp files.


pkgId: 1f6fc85135716c6b4c453d5b759b01040f52153a462addf5037ffe0291a134e2
name: libuuid
arch: x86_64
version: 2.23.2
epoch: 0
release: 26.el7_2.2
summary: Universally unique ID library
url: http://en.wikipedia.org/wiki/Util-linux
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: util-linux-2.23.2-26.el7_2.2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libuuid-2.23.2-26.el7_2.2.x86_64.rpm
checksum_type: sha256
description:
  This is the universally unique ID library, part of util-linux.

  The libuuid library generates and parses 128-bit universally unique
  id's (UUID's).  A UUID is an identifier that is unique across both
  space and time, with respect to the space of all UUIDs.  A UUID can
  be used for multiple purposes, from tagging objects with an extremely
  short lifetime, to reliably identifying very persistent objects
  across a network.

  See also the "uuid" package, which is a separate implementation.


pkgId: a0e6c1fb366fc3079422808cffb329812a6c3a43abc8b9b2a59256eb7641b361
name: libverto
arch: x86_64
version: 0.2.5
epoch: 0
release: 4.el7
summary: Main loop abstraction library
url: https://fedorahosted.org/libverto/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libverto-0.2.5-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libverto-0.2.5-4.el7.x86_64.rpm
checksum_type: sha256
description:
  libverto provides a way for libraries to expose asynchronous interfaces
  without having to choose a particular event loop, offloading this
  decision to the end application which consumes the library.

  If you are packaging an application, not library, based on libverto,
  you should depend either on a specific implementation module or you
  can depend on the virtual provides 'libverto-module-base'. This will
  ensure that you have at least one module installed that provides io,
  timeout and signal functionality. Currently glib is the only module
  that does not provide these three because it lacks signal. However,
  glib will support signal in the future.


pkgId: baaf0731ae264db05cb43502eb6fe79e580f5750dbc6a868dc6e892da4d011b8
name: libverto-tevent
arch: x86_64
version: 0.2.5
epoch: 0
release: 4.el7
summary: tevent module for libverto
url: https://fedorahosted.org/libverto/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libverto-0.2.5-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libverto-tevent-0.2.5-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Module for libverto which provides integration with tevent.

  This package provides libverto-module-base since it supports io, timeout
  and signal.


pkgId: 82f2ae817604212e8e3c465576a5f7ee05eda227117db472286a7ca8736b0917
name: libxml2
arch: x86_64
version: 2.9.1
epoch: 0
release: 6.el7_2.2
summary: Library providing XML and HTML support
url: http://xmlsoft.org/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libxml2-2.9.1-6.el7_2.2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libxml2-2.9.1-6.el7_2.2.x86_64.rpm
checksum_type: sha256
description:
  This library allows to manipulate XML files. It includes support
  to read, modify and write XML and HTML files. There is DTDs support
  this includes parsing and validation even with complex DtDs, either
  at parse time or later once the document has been modified. The output
  can be a simple SAX stream or and in-memory DOM like representations.
  In this case one can use the built-in XPath and XPointer implementation
  to select sub nodes or ranges. A flexible Input/Output mechanism is
  available, with existing HTTP and FTP modules and combined to an
  URI library.


pkgId: 8c3f4af1c828b9d0ad1f76f3a1bcdd33129881bfd937446b7af127ad3b8a088b
name: libxslt
arch: x86_64
version: 1.1.28
epoch: 0
release: 5.el7
summary: Library providing the Gnome XSLT engine
url: http://xmlsoft.org/XSLT/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: libxslt-1.1.28-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/libxslt-1.1.28-5.el7.x86_64.rpm
checksum_type: sha256
description:
  This C library allows to transform XML files into other XML files
  (or HTML, text, ...) using the standard XSLT stylesheet transformation
  mechanism. To use it you need to have a version of libxml2 >= 2.6.27
  installed. The xsltproc command is a command line interface to the XSLT engine


pkgId: d6333ddd2301495c9770379815be25cf25955a2556140819b149c5833bdd45e5
name: lldpad
arch: x86_64
version: 1.0.1
epoch: 0
release: 2.git986eb2e.el7.centos.xs5
summary: Intel LLDP Agent
url: http://open-lldp.org/
rpm_license: GPLv2
rpm_group: System Environment/Daemons
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: lldpad-1.0.1-2.git986eb2e.el7.centos.xs5.src.rpm
location_href: Packages/lldpad-1.0.1-2.git986eb2e.el7.centos.xs5.x86_64.rpm
checksum_type: sha256
description:
  This package contains the Linux user space daemon and configuration tool for
  Intel LLDP Agent with Enhanced Ethernet support for the Data Center.


pkgId: 94c1506bdae73a4b831c091ffb561a4227e77ac0f4c361b16d7d6d6592fec97d
name: logrotate
arch: x86_64
version: 3.8.6
epoch: 0
release: 7.el7_2
summary: Rotates, compresses, removes and mails system log files
url: https://fedorahosted.org/logrotate/
rpm_license: GPL+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: logrotate-3.8.6-7.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/logrotate-3.8.6-7.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The logrotate utility is designed to simplify the administration of
  log files on a system which generates a lot of log files.  Logrotate
  allows for the automatic rotation compression, removal and mailing of
  log files.  Logrotate can be set to handle a log file daily, weekly,
  monthly or when the log file gets to a certain size.  Normally,
  logrotate runs as a daily cron job.

  Install the logrotate package if you need a utility to deal with the
  log files on your system.


pkgId: e86814981de53659ca569062275ed6c6c972356cce0f109ab6e4eab8aa9aca8d
name: lsof
arch: x86_64
version: 4.87
epoch: 0
release: 4.el7
summary: A utility which lists open files on a Linux/UNIX system
url: http://people.freebsd.org/~abe/
rpm_license: zlib and Sendmail and LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Debuggers
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: lsof-4.87-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/lsof-4.87-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Lsof stands for LiSt Open Files, and it does just that: it lists
  information about files that are open by the processes running on a
  UNIX system.


pkgId: b565c7504a25028c3a644662a773a7f5c588ccc3716082c3b70f335c59c71f1f
name: lua
arch: x86_64
version: 5.1.4
epoch: 0
release: 14.el7
summary: Powerful light-weight programming language
url: http://www.lua.org/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: lua-5.1.4-14.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/lua-5.1.4-14.el7.x86_64.rpm
checksum_type: sha256
description:
  Lua is a powerful light-weight programming language designed for
  extending applications. Lua is also frequently used as a
  general-purpose, stand-alone language. Lua is free software.
  Lua combines simple procedural syntax with powerful data description
  constructs based on associative arrays and extensible semantics. Lua
  is dynamically typed, interpreted from bytecodes, and has automatic
  memory management with garbage collection, making it ideal for
  configuration, scripting, and rapid prototyping.


pkgId: 68b95e3db884409985ae7b17746d4994f27ba7b8f78d0ecc357a041e696c39b9
name: lvm2
arch: x86_64
version: 2.02.130
epoch: 7
release: 5.el7_2.5.xs17
summary: Userland logical volume management tools
url: http://sources.redhat.com/lvm2
rpm_license: GPLv2
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: lvm2-2.02.130-5.el7_2.5.xs17.src.rpm
location_href: Packages/lvm2-2.02.130-5.el7_2.5.xs17.x86_64.rpm
checksum_type: sha256
description:
  LVM2 includes all of the support for handling read/write operations on
  physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
  multiple devices (MD), see mdadd(8) or even loop devices, see
  losetup(8)), creating volume groups (kind of virtual disks) from one
  or more physical volumes and creating one or more logical volumes
  (kind of logical partitions) in volume groups.


pkgId: 47edab3f45922b6e176a54aa0734c0a799d07ed16eced3601bd8f6129d7326a9
name: lzo
arch: x86_64
version: 2.06
epoch: 0
release: 8.el7
summary: Data compression library with very fast (de)compression
url: http://www.oberhumer.com/opensource/lzo/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: lzo-2.06-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/lzo-2.06-8.el7.x86_64.rpm
checksum_type: sha256
description:
  LZO is a portable lossless data compression library written in ANSI C.
  It offers pretty fast compression and very fast decompression.
  Decompression requires no memory. In addition there are slower
  compression levels achieving a quite competitive compression ratio
  while still decompressing at this very high speed.


pkgId: 312e7af7c6a6c298429c4fb86bdf78c94f4680a697e07e15c111cc7493da46b4
name: m4
arch: x86_64
version: 1.4.16
epoch: 0
release: 10.el7
summary: The GNU macro processor
url: http://www.gnu.org/software/m4/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: m4-1.4.16-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/m4-1.4.16-10.el7.x86_64.rpm
checksum_type: sha256
description:
  A GNU implementation of the traditional UNIX macro processor.  M4 is
  useful for writing text files which can be logically parsed, and is used
  by many programs as part of their build process.  M4 has built-in
  functions for including files, running shell commands, doing arithmetic,
  etc.  The autoconf program needs m4 for generating configure scripts, but
  not for running configure scripts.

  Install m4 if you need a macro processor.


pkgId: bfe5fcf38e043edb28497b353daed73fe5cdf5811a0aa8288673cab4a687cf58
name: mailx
arch: x86_64
version: 12.5
epoch: 0
release: 12.el7_0
summary: Enhanced implementation of the mailx command
url: http://heirloom.sourceforge.net/mailx.html
rpm_license: BSD with advertising and MPLv1.1
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: mailx-12.5-12.el7_0.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/mailx-12.5-12.el7_0.x86_64.rpm
checksum_type: sha256
description:
  Mailx is an enhanced mail command, which provides the functionality
  of the POSIX mailx command, as well as SysV mail and Berkeley Mail
  (from which it is derived).

  Additionally to the POSIX features, mailx can work with Maildir/ e-mail
  storage format (as well as mailboxes), supports IMAP, POP3 and SMTP
  protocols (including over SSL) to operate with remote hosts, handles mime
  types and different charsets. There are a lot of other useful features,
  see mailx(1).

  And as its ancient analogues, mailx can be used as a mail script language,
  both for sending and receiving mail.

  Besides the "mailx" command, this package provides "mail" and "Mail"
  (which should be compatible with its predecessors from the mailx-8.x source),
  as well as "nail" (the initial name of this project).


pkgId: f2a53ad2e2e079fe42a3994e928a61000c561da3b664c685fae1debd77e9dfa4
name: make
arch: x86_64
version: 3.82
epoch: 1
release: 21.el7
summary: A GNU tool which simplifies the build process for users
url: http://www.gnu.org/software/make/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: make-3.82-21.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/make-3.82-21.el7.x86_64.rpm
checksum_type: sha256
description:
  A GNU tool for controlling the generation of executables and other
  non-source files of a program from the program's source files. Make
  allows users to build and install packages without any significant
  knowledge about the details of the build process. The details about
  how the program should be built are provided for make in the program's
  makefile.


pkgId: eb563215e735dc733b848cb80779c4f3a73e8e4122f703bbbcf222ad6556add0
name: man-db
arch: x86_64
version: 2.6.3
epoch: 0
release: 9.el7
summary: Tools for searching and reading man pages
url: http://www.nongnu.org/man-db/
rpm_license: GPLv2+ and GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: man-db-2.6.3-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/man-db-2.6.3-9.el7.x86_64.rpm
checksum_type: sha256
description:
  The man-db package includes five tools for browsing man-pages:
  man, whatis, apropos, manpath and lexgrog. man formats and displays
  manual pages. whatis searches the manual page names. apropos searches the
  manual page names and descriptions. manpath determines search path
  for manual pages. lexgrog directly reads header information in
  manual pages.


pkgId: 1a7057af62a8c6ac980a261fe0cb1553e3731b8dd8319230a7bd22abefd80284
name: mariadb-libs
arch: x86_64
version: 5.5.47
epoch: 1
release: 1.el7_2
summary: The shared libraries required for MariaDB/MySQL clients
url: http://mariadb.org
rpm_license: GPLv2 with exceptions and LGPLv2 and BSD
rpm_vendor: CentOS
rpm_group: Applications/Databases
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: mariadb-5.5.47-1.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/mariadb-libs-5.5.47-1.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The mariadb-libs package provides the essential shared libraries for any
  MariaDB/MySQL client program or interface. You will need to install this
  package to use any other MariaDB package or any clients that need to connect
  to a MariaDB/MySQL server. MariaDB is a community developed branch of MySQL.


pkgId: e0a354fec2f802bafae3a54d453f1d0f34489b40c5edf27ba90bf6662e9b25ff
name: mcelog
arch: x86_64
version: 120
epoch: 3
release: 3.e7e0ac1.el7
summary: Tool to translate x86-64 CPU Machine Check Exception data
url: https://github.com/andikleen/mcelog.git
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: mcelog-120-3.e7e0ac1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/mcelog-120-3.e7e0ac1.el7.x86_64.rpm
checksum_type: sha256
description:
  mcelog is a utility that collects and decodes Machine Check Exception data
  on x86-32 and x86-64 systems. It can be run either as a daemon, or by cron.


pkgId: 052e70fe5efb98b9b9bcac5600680e98ebc0cc1623b7d6a93880f83b5dad89be
name: mdadm
arch: x86_64
version: 3.3.2
epoch: 0
release: 7.el7
summary: The mdadm program controls Linux md devices (software RAID arrays)
url: http://www.kernel.org/pub/linux/utils/raid/mdadm/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: mdadm-3.3.2-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/mdadm-3.3.2-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The mdadm program is used to create, manage, and monitor Linux MD (software
  RAID) devices.  As such, it provides similar functionality to the raidtools
  package.  However, mdadm is a single program, and it can perform
  almost all functions without a configuration file, though a configuration
  file can be used to help with some common tasks.


pkgId: 49469b93c532801988d61fb478e7160bc262ecb0055a274d534275979c7d1cb4
name: memtest86+
arch: x86_64
version: 4.20
epoch: 0
release: 14.el7
summary: Stand-alone memory tester for x86 and x86-64 computers
url: http://www.memtest.org
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: memtest86+-4.20-14.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/memtest86+-4.20-14.el7.x86_64.rpm
checksum_type: sha256
description:
  Memtest86+ is a thorough stand-alone memory test for x86 and x86-64
  architecture computers. BIOS based memory tests are only a quick
  check and often miss many of the failures that are detected by
  Memtest86+.

  The ELF version should be used for booting from grub,
  and avoids the following errors:
  "Error 7: Loading below 1MB is not supported"
  "Error 13: Invalid or unsupported executable format"
  "Error 28: Selected item cannot fit into memory"

  The script '/usr/sbin/memtest-setup' can be run (as root)
  to add the memtest86+ entry to your GRUB boot menu.


pkgId: e15c495f68885f7ffa06819d87a04781826e49da35f82e05bc9822efbec1ea7b
name: microcode_ctl
arch: x86_64
version: 2.1
epoch: 2
release: 13
summary: Tool to transform and deploy CPU microcode update for x86.
url: http://fedorahosted.org/microcode_ctl
rpm_license: GPLv2+ and Redistributable, no modification permitted
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: microcode_ctl-2.1-13.src.rpm
location_href: Packages/microcode_ctl-2.1-13.x86_64.rpm
checksum_type: sha256
description:
  The microcode_ctl utility is a companion to the microcode driver written
  by Tigran Aivazian <tigran@aivazian.fsnet.co.uk>.

  The microcode update is volatile and needs to be uploaded on each system
  boot i.e. it doesn't reflash your cpu permanently, reboot and it reverts
  back to the old microcode.


pkgId: 682c41e47ede5f0bb4fce1716944e56d0e03dcc9f6051d71a0b380a39191fabb
name: ncurses
arch: x86_64
version: 5.9
epoch: 0
release: 13.20130511.el7
summary: Ncurses support utilities
url: http://invisible-island.net/ncurses/ncurses.html
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ncurses-5.9-13.20130511.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ncurses-5.9-13.20130511.el7.x86_64.rpm
checksum_type: sha256
description:
  The curses library routines are a terminal-independent method of
  updating character screens with reasonable optimization.  The ncurses
  (new curses) library is a freely distributable replacement for the
  discontinued 4.4 BSD classic curses library.

  This package contains support utilities, including a terminfo compiler
  tic, a decompiler infocmp, clear, tput, tset, and a termcap conversion
  tool captoinfo.


pkgId: 9b9d6f4dafeff48ddbcd895abce47ebac267a80fb0487983e64f9903c72a34f8
name: ncurses-base
arch: noarch
version: 5.9
epoch: 0
release: 13.20130511.el7
summary: Descriptions of common terminals
url: http://invisible-island.net/ncurses/ncurses.html
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ncurses-5.9-13.20130511.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ncurses-base-5.9-13.20130511.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains descriptions of common terminals. Other terminal
  descriptions are included in the ncurses-term package.


pkgId: aced455ec47d6fd45dae0932285e16ae8cf31e202eacad003ef31a985e554081
name: ncurses-libs
arch: x86_64
version: 5.9
epoch: 0
release: 13.20130511.el7
summary: Ncurses libraries
url: http://invisible-island.net/ncurses/ncurses.html
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ncurses-5.9-13.20130511.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ncurses-libs-5.9-13.20130511.el7.x86_64.rpm
checksum_type: sha256
description:
  The curses library routines are a terminal-independent method of
  updating character screens with reasonable optimization.  The ncurses
  (new curses) library is a freely distributable replacement for the
  discontinued 4.4 BSD classic curses library.

  This package contains the ncurses libraries.


pkgId: 7ba74d64d6d9b5d6e1f8de277d3c88aedac9617d69b96e00a0fb6dc387a1f58c
name: net-snmp
arch: x86_64
version: 5.7.2
epoch: 1
release: 24.el7
summary: A collection of SNMP protocol tools and libraries
url: http://net-snmp.sourceforge.net/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: net-snmp-5.7.2-24.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/net-snmp-5.7.2-24.el7.x86_64.rpm
checksum_type: sha256
description:
  SNMP (Simple Network Management Protocol) is a protocol used for
  network management. The NET-SNMP project includes various SNMP tools:
  an extensible agent, an SNMP library, tools for requesting or setting
  information from SNMP agents, tools for generating and handling SNMP
  traps, a version of the netstat command which uses SNMP, and a Tk/Perl
  mib browser. This package contains the snmpd and snmptrapd daemons,
  documentation, etc.

  You will probably also want to install the net-snmp-utils package,
  which contains NET-SNMP utilities.


pkgId: b730b6f40f0201dcb035af868b859a7d89b082f0ed1dddc3819e3b5afcd8c79f
name: net-snmp-agent-libs
arch: x86_64
version: 5.7.2
epoch: 1
release: 24.el7
summary: The NET-SNMP runtime agent libraries
url: http://net-snmp.sourceforge.net/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: net-snmp-5.7.2-24.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/net-snmp-agent-libs-5.7.2-24.el7.x86_64.rpm
checksum_type: sha256
description:
  The net-snmp-agent-libs package contains the runtime agent libraries for shared
  binaries and applications.


pkgId: 4760d66f0e5210abf41da4fc0bd8e8f4483401e6f1f05470aa63785f3071a6c3
name: net-snmp-libs
arch: x86_64
version: 5.7.2
epoch: 1
release: 24.el7
summary: The NET-SNMP runtime client libraries
url: http://net-snmp.sourceforge.net/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: net-snmp-5.7.2-24.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/net-snmp-libs-5.7.2-24.el7.x86_64.rpm
checksum_type: sha256
description:
  The net-snmp-libs package contains the runtime client libraries for shared
  binaries and applications.


pkgId: 73a95a406de59fc0a111cca304389615d1fa98b2bc7deadafee2235ae83662a5
name: net-tools
arch: x86_64
version: 2.0
epoch: 0
release: 0.17.20131004git.el7
summary: Basic networking tools
url: http://sourceforge.net/projects/net-tools/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: net-tools-2.0-0.17.20131004git.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/net-tools-2.0-0.17.20131004git.el7.x86_64.rpm
checksum_type: sha256
description:
  The net-tools package contains basic networking tools,
  including ifconfig, netstat, route, and others.
  Most of them are obsolete. For replacement check iproute package.


pkgId: 6157d1ef15c62a54b22cf92301251de194542dad92a177a95d83cdec595d5d36
name: nettle
arch: x86_64
version: 2.7.1
epoch: 0
release: 4.el7
summary: A low-level cryptographic library
url: http://www.lysator.liu.se/~nisse/nettle/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nettle-2.7.1-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nettle-2.7.1-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Nettle is a cryptographic library that is designed to fit easily in more
  or less any context: In crypto toolkits for object-oriented languages
  (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in
  kernel space.


pkgId: 08dbc49c8c4315587e101c477107976e6700db1f148f4115e1a60459944973b7
name: newt
arch: x86_64
version: 0.52.15
epoch: 0
release: 4.el7
summary: A library for text mode user interfaces
url: https://fedorahosted.org/newt/
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: newt-0.52.15-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/newt-0.52.15-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Newt is a programming library for color text mode, widget based user
  interfaces.  Newt can be used to add stacked windows, entry widgets,
  checkboxes, radio buttons, labels, plain text fields, scrollbars,
  etc., to text mode user interfaces.  This package also contains the
  shared library needed by programs built with newt, as well as a
  /usr/bin/dialog replacement called whiptail.  Newt is based on the
  slang library.


pkgId: 43439126f07942d34de87a9ea5b78a5b7bb2538585f0ea8d11801b32e748651a
name: newt-python
arch: x86_64
version: 0.52.15
epoch: 0
release: 4.el7
summary: Python bindings for newt
url: https://fedorahosted.org/newt/
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: newt-0.52.15-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/newt-python-0.52.15-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The newt-python package contains the Python bindings for the newt library
  providing a python API for creating text mode ionterfaces.


pkgId: b97f97ff55fcb78ff2529af4f0f8fedc30d216e3c062a6a2932e36fe0adce193
name: nfs-utils
arch: x86_64
version: 1.3.0
epoch: 1
release: 0.21.el7_2
summary: NFS utilities and supporting clients and daemons for the kernel NFS server
url: http://sourceforge.net/projects/nfs
rpm_license: MIT and GPLv2 and GPLv2+ and BSD
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nfs-utils-1.3.0-0.21.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nfs-utils-1.3.0-0.21.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The nfs-utils package provides a daemon for the kernel NFS server and
  related tools, which provides a much higher level of performance than the
  traditional Linux NFS server used by most users.

  This package also contains the showmount program.  Showmount queries the
  mount daemon on a remote host for information about the NFS (Network File
  System) server on the remote host.  For example, showmount can display the
  clients which are mounted on that host.

  This package also contains the mount.nfs and umount.nfs program.


pkgId: 318994a6e6eb6276dbbc97d70d2d798db8b9203822c415836dde916667f81476
name: nspr
arch: x86_64
version: 4.10.8
epoch: 0
release: 2.el7_1
summary: Netscape Portable Runtime
url: http://www.mozilla.org/projects/nspr/
rpm_license: MPLv2.0
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nspr-4.10.8-2.el7_1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nspr-4.10.8-2.el7_1.x86_64.rpm
checksum_type: sha256
description:
  NSPR provides platform independence for non-GUI operating system
  facilities. These facilities include threads, thread synchronization,
  normal file and network I/O, interval timing and calendar time, basic
  memory management (malloc and free) and shared library linking.


pkgId: ff8154a09de5971b31ca568fbf910d46f76ecd84c4042ab405ecb4be2c935381
name: nss
arch: x86_64
version: 3.19.1
epoch: 0
release: 19.el7_2
summary: Network Security Services
url: http://www.mozilla.org/projects/security/pki/nss/
rpm_license: MPLv2.0
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nss-3.19.1-19.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nss-3.19.1-19.el7_2.x86_64.rpm
checksum_type: sha256
description:
  Network Security Services (NSS) is a set of libraries designed to
  support cross-platform development of security-enabled client and
  server applications. Applications built with NSS can support SSL v2
  and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
  v3 certificates, and other security standards.


pkgId: a44903fffce57a6361a402d693f24ddfd660de621f0d3ffe19bd3fd7950876e2
name: nss-softokn-freebl
arch: x86_64
version: 3.16.2.3
epoch: 0
release: 13.el7_1
summary: Freebl library for the Network Security Services
url: http://www.mozilla.org/projects/security/pki/nss/
rpm_license: MPLv2.0
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nss-softokn-3.16.2.3-13.el7_1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nss-softokn-freebl-3.16.2.3-13.el7_1.x86_64.rpm
checksum_type: sha256
description:
  NSS Softoken Cryptographic Module Freebl Library

  Install the nss-softokn-freebl package if you need the freebl
  library.


pkgId: 0fc368e0afeec71497b2d823419c2a6ee6a661ed247cb4d48577ded72cacf9b3
name: nss-sysinit
arch: x86_64
version: 3.19.1
epoch: 0
release: 19.el7_2
summary: System NSS Initialization
url: http://www.mozilla.org/projects/security/pki/nss/
rpm_license: MPLv2.0
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nss-3.19.1-19.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nss-sysinit-3.19.1-19.el7_2.x86_64.rpm
checksum_type: sha256
description:
  Default Operating System module that manages applications loading
  NSS globally on the system. This module loads the system defined
  PKCS #11 modules for NSS and chains with other NSS modules to load
  any system or user configured modules.


pkgId: ebb13a17c96d9b8e8b61c3612a81eaf7f4e5059ae4692ebf49372b83fc134284
name: nss-tools
arch: x86_64
version: 3.19.1
epoch: 0
release: 19.el7_2
summary: Tools for the Network Security Services
url: http://www.mozilla.org/projects/security/pki/nss/
rpm_license: MPLv2.0
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: nss-3.19.1-19.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/nss-tools-3.19.1-19.el7_2.x86_64.rpm
checksum_type: sha256
description:
  Network Security Services (NSS) is a set of libraries designed to
  support cross-platform development of security-enabled client and
  server applications. Applications built with NSS can support SSL v2
  and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
  v3 certificates, and other security standards.

  Install the nss-tools package if you need command-line tools to
  manipulate the NSS certificate and key database.


pkgId: 98869c1bba3ab4dff033cbaf1bd2a023bca2396cba4f4ae43ba6feeaa1c5c41b
name: ntp
arch: x86_64
version: 4.2.6p5
epoch: 0
release: 25.el7.centos
summary: The NTP daemon and utilities
url: http://www.ntp.org
rpm_license: (MIT and BSD and BSD with advertising) and GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: c1bm.rdu2.centos.org
rpm_sourcerpm: ntp-4.2.6p5-25.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ntp-4.2.6p5-25.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  The Network Time Protocol (NTP) is used to synchronize a computer's
  time with another reference time source. This package includes ntpd
  (a daemon which continuously adjusts system time) and utilities used
  to query and configure the ntpd daemon.

  Perl scripts ntp-wait and ntptrace are in the ntp-perl package,
  ntpdate is in the ntpdate package and sntp is in the sntp package.
  The documentation is in the ntp-doc package.


pkgId: e9fb84cfb5c83028cf6771fbc51e35737b5eaf0c135609ec25d600efdf78308c
name: openldap
arch: x86_64
version: 2.4.40
epoch: 0
release: 9.el7_2
summary: LDAP support libraries
url: http://www.openldap.org/
rpm_license: OpenLDAP
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openldap-2.4.40-9.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openldap-2.4.40-9.el7_2.x86_64.rpm
checksum_type: sha256
description:
  OpenLDAP is an open source suite of LDAP (Lightweight Directory Access
  Protocol) applications and development tools. LDAP is a set of
  protocols for accessing directory services (usually phone book style
  information, but other information is possible) over the Internet,
  similar to the way DNS (Domain Name System) information is propagated
  over the Internet. The openldap package contains configuration files,
  libraries, and documentation for OpenLDAP.


pkgId: 8ff51131fc2648e961175b3991e8ba0e7add84cc4f0dae27dd28ecfe109b5ca2
name: openssh
arch: x86_64
version: 6.6.1p1
epoch: 0
release: 25.el7_2
summary: An open source implementation of SSH protocol versions 1 and 2
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openssh-6.6.1p1-25.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openssh-6.6.1p1-25.el7_2.x86_64.rpm
checksum_type: sha256
description:
  SSH (Secure SHell) is a program for logging into and executing
  commands on a remote machine. SSH is intended to replace rlogin and
  rsh, and to provide secure encrypted communications between two
  untrusted hosts over an insecure network. X11 connections and
  arbitrary TCP/IP ports can also be forwarded over the secure channel.

  OpenSSH is OpenBSD's version of the last free version of SSH, bringing
  it up to date in terms of security and features.

  This package includes the core files necessary for both the OpenSSH
  client and server. To make this package useful, you should also
  install openssh-clients, openssh-server, or both.


pkgId: 025573f841e15ba242f6f59214aa1a36387aa4de998e2554e5f99333b0ffb48c
name: openssh-clients
arch: x86_64
version: 6.6.1p1
epoch: 0
release: 25.el7_2
summary: An open source SSH client applications
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openssh-6.6.1p1-25.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openssh-clients-6.6.1p1-25.el7_2.x86_64.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package includes
  the clients necessary to make encrypted connections to SSH servers.


pkgId: 929cf042420420e204513e0c8f800f45d7a4a0fb10d21d6fea641007ddf6a900
name: openssh-server
arch: x86_64
version: 6.6.1p1
epoch: 0
release: 25.el7_2
summary: An open source SSH server daemon
url: http://www.openssh.com/portable.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openssh-6.6.1p1-25.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openssh-server-6.6.1p1-25.el7_2.x86_64.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package contains
  the secure shell daemon (sshd). The sshd daemon allows SSH clients to
  securely connect to your SSH server.


pkgId: f677ddfe35869112675db9a9dd4114c6db0e0eecb79b74459346a8b711d8afef
name: openssl
arch: x86_64
version: 1.0.1e
epoch: 1
release: 51.el7_2.4
summary: Utilities from the general purpose cryptography library with TLS implementation
url: http://www.openssl.org/
rpm_license: OpenSSL
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openssl-1.0.1e-51.el7_2.4.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openssl-1.0.1e-51.el7_2.4.x86_64.rpm
checksum_type: sha256
description:
  The OpenSSL toolkit provides support for secure communications between
  machines. OpenSSL includes a certificate management tool and shared
  libraries which provide various cryptographic algorithms and
  protocols.


pkgId: 70a7a220c07819cd2a8e9d621e5bda8323074bab2729b19d77358dbba580bc80
name: openssl-libs
arch: x86_64
version: 1.0.1e
epoch: 1
release: 51.el7_2.4
summary: A general purpose cryptography library with TLS implementation
url: http://www.openssl.org/
rpm_license: OpenSSL
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openssl-1.0.1e-51.el7_2.4.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openssl-libs-1.0.1e-51.el7_2.4.x86_64.rpm
checksum_type: sha256
description:
  OpenSSL is a toolkit for supporting cryptography. The openssl-libs
  package contains the libraries that are used by various applications which
  support cryptographic algorithms and protocols.


pkgId: aa8fba569cbe9d6cef39ea31dd643169253b7c173bbe11d081b43ccfb344e464
name: openssl-perl
arch: x86_64
version: 1.0.1e
epoch: 1
release: 51.el7_2.4
summary: Perl scripts provided with OpenSSL
url: http://www.openssl.org/
rpm_license: OpenSSL
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: openssl-1.0.1e-51.el7_2.4.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/openssl-perl-1.0.1e-51.el7_2.4.x86_64.rpm
checksum_type: sha256
description:
  OpenSSL is a toolkit for supporting cryptography. The openssl-perl
  package provides Perl scripts for converting certificates and keys
  from other formats to the formats used by the OpenSSL toolkit.


pkgId: b0be8027937980849875413c08092d9a7b1d07777e134d3d5eddef984a3183c2
name: openvswitch
arch: x86_64
version: 2.3.2
epoch: 0
release: 24
summary: Virtual switch
url: http://www.openvswitch.org/
rpm_license: ASL 2.0 and GPLv2
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: openvswitch-2.3.2-24.src.rpm
location_href: Packages/openvswitch-2.3.2-24.x86_64.rpm
checksum_type: sha256
description:
  The vswitch provides standard network bridging functions augmented with
  support for the OpenFlow protocol for remote per-flow control of
  traffic.


pkgId: 09703de0d7926fdc1356ad71bc79769e928ea32ef3c8672ffa3b14c501c15f14
name: oprofile
arch: x86_64
version: 0.9.9
epoch: 0
release: 16.el7
summary: System wide profiler
url: http://oprofile.sf.net
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: oprofile-0.9.9-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/oprofile-0.9.9-16.el7.x86_64.rpm
checksum_type: sha256
description:
  OProfile is a profiling system for systems running Linux. The
  profiling runs transparently during the background, and profile data
  can be collected at any time. OProfile makes use of the hardware performance
  counters provided on Intel P6, and AMD Athlon family processors, and can use
  the RTC for profiling on other x86 processor types.

  See the HTML documentation for further details.


pkgId: 046d4635cc1899f124f8cba38bb0ee4600112a40e03b484a536f1e7260dd0fa6
name: os-prober
arch: x86_64
version: 1.58
epoch: 0
release: 5.el7
summary: Probes disks on the system for installed operating systems
url: http://kitenet.net/~joey/code/os-prober/
rpm_license: GPLv2+ and GPL+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: os-prober-1.58-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/os-prober-1.58-5.el7.x86_64.rpm
checksum_type: sha256
description:
  This package detects other OSes available on a system and outputs the results
  in a generic machine-readable format. Support for new OSes and Linux
  distributions can be added easily.


pkgId: c117b648aad6092d348f4ca259125af9a8c81e2a89b8c0c7b219262f06758cb5
name: p11-kit
arch: x86_64
version: 0.20.7
epoch: 0
release: 3.el7
summary: Library for loading and sharing PKCS#11 modules
url: http://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: p11-kit-0.20.7-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/p11-kit-0.20.7-3.el7.x86_64.rpm
checksum_type: sha256
description:
  p11-kit provides a way to load and enumerate PKCS#11 modules, as well
  as a standard configuration setup for installing PKCS#11 modules in
  such a way that they're discoverable.


pkgId: ba0189a13bb6ff73997cc96d71c649884d75f6eb12b0bbb3c5890405c1cdf27e
name: p11-kit-trust
arch: x86_64
version: 0.20.7
epoch: 0
release: 3.el7
summary: System trust module from p11-kit
url: http://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: p11-kit-0.20.7-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/p11-kit-trust-0.20.7-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The p11-kit-trust package contains a system trust PKCS#11 module which
  contains certificate anchors and black lists.


pkgId: f48d7ecdb5b1292c576463f373555e7147a6f1de9b2dfcb41beab0d370c5535a
name: pam
arch: x86_64
version: 1.1.8
epoch: 0
release: 12.el7_1.1
summary: An extensible library which provides authentication for applications
url: http://www.linux-pam.org/
rpm_license: BSD and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pam-1.1.8-12.el7_1.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pam-1.1.8-12.el7_1.1.x86_64.rpm
checksum_type: sha256
description:
  PAM (Pluggable Authentication Modules) is a system security tool that
  allows system administrators to set authentication policy without
  having to recompile programs that handle authentication.


pkgId: b36a1f37dba9421bf5a760665d0a4b4bf25e126b344a60d21d61acddfc3e9744
name: parted
arch: x86_64
version: 3.1
epoch: 0
release: 23.el7
summary: The GNU disk partition manipulation program
url: http://www.gnu.org/software/parted
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: parted-3.1-23.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/parted-3.1-23.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU Parted program allows you to create, destroy, resize, move,
  and copy hard disk partitions. Parted can be used for creating space
  for new operating systems, reorganizing disk usage, and copying data
  to new hard disks.


pkgId: 6e3032f5df7d92099eacd3ed1c4179cddc6f345ba38a3299b30d147806ae9c8d
name: passwd
arch: x86_64
version: 0.79
epoch: 0
release: 4.el7
summary: An utility for setting or changing passwords using PAM
url: http://fedorahosted.org/passwd
rpm_license: BSD or GPL+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: passwd-0.79-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/passwd-0.79-4.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains a system utility (passwd) which sets
  or changes passwords, using PAM (Pluggable Authentication
  Modules) library.


pkgId: a179aade3ee40ab828743d7a183b893e8f22b5ea91659aafeaa92e2717213856
name: patch
arch: x86_64
version: 2.7.1
epoch: 0
release: 8.el7
summary: Utility for modifying/upgrading files
url: http://www.gnu.org/software/patch/patch.html
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: patch-2.7.1-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/patch-2.7.1-8.el7.x86_64.rpm
checksum_type: sha256
description:
  The patch program applies diff files to originals.  The diff command
  is used to compare an original to a changed file.  Diff lists the
  changes made to the file.  A person who has the original file can then
  use the patch command with the diff file to add the changes to their
  original file (patching the file).

  Patch should be installed because it is a common way of upgrading
  applications.


pkgId: 00179d5e771f41f42e0dd66c629daa01b8ba69db8328ee5f385baa389376ff6f
name: pbis-open
arch: x86_64
version: 8.2.2
epoch: 0
release: 1xs39
summary: Identity Services for authenticating with Active Directory domains
url: http://www.beyondtrust.com/Products/PowerBroker-Identity-Services-Open-Edition/
rpm_license: Likewise Proprietary
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: pbis-open-8.2.2-1xs39.src.rpm
location_href: Packages/pbis-open-8.2.2-1xs39.x86_64.rpm
checksum_type: sha256
description:
  PowerBroker Identity Services Open integrates Unix desktops and servers into an Active Directory environment by joining hosts to the domain and lets Unix applications and services authenticate MS Windows' users and groups via the PAM and Name Service Switch libraries.


pkgId: f451cb7f202e99c127454ff24bfa3808c52786973fed52ddf6c5bba79ff33f38
name: pciutils
arch: x86_64
version: 3.2.1
epoch: 0
release: 4.el7
summary: PCI bus related utilities
url: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pciutils-3.2.1-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pciutils-3.2.1-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The pciutils package contains various utilities for inspecting and
  setting devices connected to the PCI bus. The utilities provided
  require kernel version 2.1.82 or newer (which support the
  /proc/bus/pci interface).


pkgId: 04b03e6953d851519611972e7b3dc6c4e68b07a808388962f01ffb5ca7c09348
name: pcre
arch: x86_64
version: 8.32
epoch: 0
release: 15.el7
summary: Perl-compatible regular expression library
url: http://www.pcre.org/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pcre-8.32-15.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pcre-8.32-15.el7.x86_64.rpm
checksum_type: sha256
description:
  Perl-compatible regular expression library.
  PCRE has its own native API, but a set of "wrapper" functions that are based on
  the POSIX API are also supplied in the library libpcreposix. Note that this
  just provides a POSIX calling interface to PCRE: the regular expressions
  themselves still follow Perl syntax and semantics. The header file
  for the POSIX-style functions is called pcreposix.h.


pkgId: 225a880df66b5108ccfcc5144dfac60dbf63d4b00c27c5a69e89e21e536742f2
name: perl
arch: x86_64
version: 5.16.3
epoch: 4
release: 286.el7
summary: Practical Extraction and Report Language
url: http://www.perl.org/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and Copyright Only and MIT and Public Domain and UCD
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-5.16.3-286.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-5.16.3-286.el7.x86_64.rpm
checksum_type: sha256
description:
  Perl is a high-level programming language with roots in C, sed, awk and shell
  scripting.  Perl is good at handling processes and files, and is especially
  good at handling text.  Perl's hallmarks are practicality and efficiency.
  While it is used to do a lot of different things, Perl's most common
  applications are system administration utilities and web programming.  A large
  proportion of the CGI scripts on the web are written in Perl.  You need the
  perl package installed on your system so that your system can handle Perl
  scripts.

  Install this package if you want to program in Perl or enable your system to
  handle Perl scripts.


pkgId: 88987b87e8228f5f2aa9858dead5d78f711372767bdf87342e7712a63313fe6e
name: perl-Carp
arch: noarch
version: 1.26
epoch: 0
release: 244.el7
summary: Alternative warn and die for modules
url: http://search.cpan.org/dist/Carp/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Carp-1.26-244.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Carp-1.26-244.el7.noarch.rpm
checksum_type: sha256
description:
  The Carp routines are useful in your own modules because they act like
  die() or warn(), but with a message which is more likely to be useful to a
  user of your module. In the case of cluck, confess, and longmess that
  context is a summary of every call in the call-stack. For a shorter message
  you can use carp or croak which report the error as being from where your
  module was called. There is no guarantee that that is where the error was,
  but it is a good educated guess.


pkgId: 6a5abf32518d7af79b04cf2601fa5d48ff676000df5802571356fb0464395321
name: perl-Data-Dumper
arch: x86_64
version: 2.145
epoch: 0
release: 3.el7
summary: Stringify perl data structures, suitable for printing and eval
url: http://search.cpan.org/dist/Data-Dumper/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Data-Dumper-2.145-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Data-Dumper-2.145-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Given a list of scalars or reference variables, writes out their contents
  in perl syntax. The references can also be objects. The content of each
  variable is output in a single Perl statement. Handles self-referential
  structures correctly.


pkgId: 390bab5999ebc24753c1e5927a8fe9f0ac1a4c145753d4426be9a0dda1148dc5
name: perl-Encode
arch: x86_64
version: 2.51
epoch: 0
release: 7.el7
summary: Character encodings in Perl
url: http://search.cpan.org/dist/Encode/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Encode-2.51-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Encode-2.51-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The Encode module provides the interface between Perl strings and the rest
  of the system. Perl strings are sequences of characters.


pkgId: 34e3ae94d6e3ee116b8fcaee90fc4d6c234565a99e07ea4b9e573bcfcdeba17c
name: perl-Exporter
arch: noarch
version: 5.68
epoch: 0
release: 3.el7
summary: Implements default import method for modules
url: http://search.cpan.org/dist/Exporter/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Exporter-5.68-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Exporter-5.68-3.el7.noarch.rpm
checksum_type: sha256
description:
  The Exporter module implements an import method which allows a module to
  export functions and variables to its users' name spaces. Many modules use
  Exporter rather than implementing their own import method because Exporter
  provides a highly flexible interface, with an implementation optimized for
  the common case.


pkgId: 4a28ae627b06abc562aca71b9d582a3a2b39bf51ee9e6bfeecc6b13a6d799927
name: perl-File-Path
arch: noarch
version: 2.09
epoch: 0
release: 2.el7
summary: Create or remove directory trees
url: http://search.cpan.org/dist/File-Path/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-File-Path-2.09-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-File-Path-2.09-2.el7.noarch.rpm
checksum_type: sha256
description:
  This module provides a convenient way to create directories of arbitrary
  depth and to delete an entire directory subtree from the file system.


pkgId: b54c5cc8ac7407c53b03278dac05d954d4da0376c815ca29b44b6c6fb9cdb2ff
name: perl-File-Temp
arch: noarch
version: 0.23.01
epoch: 0
release: 3.el7
summary: Return name and handle of a temporary file safely
url: http://search.cpan.org/dist/File-Temp/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-File-Temp-0.23.01-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-File-Temp-0.23.01-3.el7.noarch.rpm
checksum_type: sha256
description:
  File::Temp can be used to create and open temporary files in a safe way.
  There is both a function interface and an object-oriented interface. The
  File::Temp constructor or the tempfile() function can be used to return the
  name and the open file handle of a temporary file. The tempdir() function
  can be used to create a temporary directory.


pkgId: 9ce9c4b35e5a4de8fd0c43468a5ffe5733720128e52d308a7b4431072d798e30
name: perl-Filter
arch: x86_64
version: 1.49
epoch: 0
release: 3.el7
summary: Perl source filters
url: http://search.cpan.org/dist/Filter/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Filter-1.49-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Filter-1.49-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Source filters alter the program text of a module before Perl sees it, much as
  a C preprocessor alters the source text of a C program before the compiler
  sees it.


pkgId: f4c560119e17f086ba187916d7318a75d991dbb7ecf48d9c6624c23f4b6de511
name: perl-Getopt-Long
arch: noarch
version: 2.40
epoch: 0
release: 2.el7
summary: Extended processing of command line options
url: http://search.cpan.org/dist/Getopt-Long/
rpm_license: GPLv2+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Getopt-Long-2.40-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Getopt-Long-2.40-2.el7.noarch.rpm
checksum_type: sha256
description:
  The Getopt::Long module implements an extended getopt function called
  GetOptions(). It parses the command line from @ARGV, recognizing and removing
  specified options and their possible values.  It adheres to the POSIX syntax
  for command line options, with GNU extensions. In general, this means that
  options have long names instead of single letters, and are introduced with
  a double dash "--". Support for bundling of command line options, as was the
  case with the more traditional single-letter approach, is provided but not
  enabled by default.


pkgId: 20f9dce3890d2bd4a0970a9b0ddc85db891dc3a1486bcd7784f4ec82e1a4df3b
name: perl-HTTP-Tiny
arch: noarch
version: 0.033
epoch: 0
release: 3.el7
summary: Small, simple, correct HTTP/1.1 client
url: http://search.cpan.org/dist/HTTP-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-HTTP-Tiny-0.033-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-HTTP-Tiny-0.033-3.el7.noarch.rpm
checksum_type: sha256
description:
  This is a very simple HTTP/1.1 client, designed for doing simple GET requests
  without the overhead of a large framework like LWP::UserAgent.

  It is more correct and more complete than HTTP::Lite. It supports proxies
  (currently only non-authenticating ones) and redirection. It also correctly
  resumes after EINTR.


pkgId: cdcc63b856bd822783e1ccc1a616a267e6651e0e4b9cf76ef33d440dca400f4b
name: perl-Pod-Escapes
arch: noarch
version: 1.04
epoch: 1
release: 286.el7
summary: Perl module for resolving POD escape sequences
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-5.16.3-286.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Pod-Escapes-1.04-286.el7.noarch.rpm
checksum_type: sha256
description:
  This module provides things that are useful in decoding Pod E<...> sequences.
  Presumably, it should be used only by Pod parsers and/or formatters.


pkgId: c362663cf1d0a9fcfdb6340108c2ca5db4ada4417ad3473cd97dd08e7830e2a5
name: perl-Pod-Perldoc
arch: noarch
version: 3.20
epoch: 0
release: 4.el7
summary: Look up Perl documentation in Pod format
url: http://search.cpan.org/dist/Pod-Perldoc/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Pod-Perldoc-3.20-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Pod-Perldoc-3.20-4.el7.noarch.rpm
checksum_type: sha256
description:
  perldoc looks up a piece of documentation in .pod format that is embedded
  in the perl installation tree or in a perl script, and displays it via
  "groff -man | $PAGER". This is primarily used for the documentation for
  the perl library modules.


pkgId: 936eb5c800c670ed6d8c15de874dafc1405e69bc92f284a255c9640e04187cec
name: perl-Pod-Simple
arch: noarch
version: 3.28
epoch: 1
release: 4.el7
summary: Framework for parsing POD documentation
url: http://search.cpan.org/dist/Pod-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Pod-Simple-3.28-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Pod-Simple-3.28-4.el7.noarch.rpm
checksum_type: sha256
description:
  Pod::Simple is a Perl library for parsing text in the Pod ("plain old
  documentation") markup language that is typically used for writing
  documentation for Perl and for Perl modules.


pkgId: f50c01660821e305af31a87435dcdfe8453dea0306c752720d1102d9bdea662d
name: perl-Pod-Usage
arch: noarch
version: 1.63
epoch: 0
release: 3.el7
summary: Print a usage message from embedded POD documentation
url: http://search.cpan.org/dist/Pod-Usage/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Pod-Usage-1.63-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Pod-Usage-1.63-3.el7.noarch.rpm
checksum_type: sha256
description:
  pod2usage will print a usage message for the invoking script (using its
  embedded POD documentation) and then exit the script with the desired exit
  status. The usage message printed may have any one of three levels of
  "verboseness": If the verbose level is 0, then only a synopsis is printed.
  If the verbose level is 1, then the synopsis is printed along with a
  description (if present) of the command line options and arguments. If the
  verbose level is 2, then the entire manual page is printed.


pkgId: 78a9b1decd36b6f44ca7faaf80d2c31472080a1a1f54dfbbf9bd343427c38387
name: perl-Scalar-List-Utils
arch: x86_64
version: 1.27
epoch: 0
release: 248.el7
summary: A selection of general-utility scalar and list subroutines
url: http://search.cpan.org/dist/Scalar-List-Utils/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Scalar-List-Utils-1.27-248.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains a selection of subroutines that people have expressed
  would be nice to have in the perl core, but the usage would not really be
  high enough to warrant the use of a keyword, and the size so small such
  that being individual extensions would be wasteful.


pkgId: aa1219c3859467110ff7eda98335769a69b0d6c25ed3bdf75e35066930fe942e
name: perl-Socket
arch: x86_64
version: 2.010
epoch: 0
release: 3.el7
summary: Networking constants and support functions
url: http://search.cpan.org/dist/Socket/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Socket-2.010-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Socket-2.010-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This module provides a variety of constants, structure manipulators and other
  functions related to socket-based networking. The values and functions
  provided are useful when used in conjunction with Perl core functions such as
  socket(), setsockopt() and bind(). It also provides several other support
  functions, mostly for dealing with conversions of network addresses between
  human-readable and native binary forms, and for hostname resolver operations.


pkgId: b4e447f280358a35939678f5af981cae1f203d41e10900cb28b08bed55dff18f
name: perl-Storable
arch: x86_64
version: 2.45
epoch: 0
release: 3.el7
summary: Persistence for Perl data structures
url: http://search.cpan.org/dist/Storable/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Storable-2.45-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Storable-2.45-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The Storable package brings persistence to your Perl data structures
  containing scalar, array, hash or reference objects, i.e. anything that
  can be conveniently stored to disk and retrieved at a later time.


pkgId: 50b7d7e6d6c35951e21110b43d4f4ac1505e67452a587f1c1bcc7947fdfa906c
name: perl-Text-ParseWords
arch: noarch
version: 3.29
epoch: 0
release: 4.el7
summary: Parse text into an array of tokens or array of arrays
url: http://search.cpan.org/dist/Text-ParseWords/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Text-ParseWords-3.29-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Text-ParseWords-3.29-4.el7.noarch.rpm
checksum_type: sha256
description:
  The nested_quotewords() and quotewords() functions accept a delimiter (which
  can be a regular expression) and a list of lines and then breaks those lines
  up into a list of words ignoring delimiters that appear inside quotes.
  quotewords() returns all of the tokens in a single long list, while
  nested_quotewords() returns a list of token lists corresponding to the
  elements of @lines. parse_line() does tokenizing on a single string. The
  quotewords() functions simply call &parse_line(), so if you're only splitting
  one line you can call parse_line() directly and save a function call.


pkgId: 2fb27e10bc238d2cc0d75b500e96f9bcba0a4ce024fc5c8db874a1b88e363dc8
name: perl-Time-HiRes
arch: x86_64
version: 1.9725
epoch: 4
release: 3.el7
summary: High resolution alarm, sleep, gettimeofday, interval timers
url: http://search.cpan.org/dist/Time-HiRes/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Time-HiRes-1.9725-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The Time::HiRes module implements a Perl interface to the usleep, nanosleep,
  ualarm, gettimeofday, and setitimer/getitimer system calls, in other words,
  high resolution time and timers.


pkgId: ca4621e02dcdeb91a8c48ac0acc4af4dcf97f67acc241db9e985eceaab6d6284
name: perl-Time-Local
arch: noarch
version: 1.2300
epoch: 0
release: 2.el7
summary: Efficiently compute time from local and GMT time
url: http://search.cpan.org/dist/Time-Local/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-Time-Local-1.2300-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-Time-Local-1.2300-2.el7.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that are the inverse of built-in perl functions
  localtime() and gmtime(). They accept a date as a six-element array, and
  return the corresponding time(2) value in seconds since the system epoch
  (Midnight, January 1, 1970 GMT on Unix, for example). This value can be
  positive or negative, though POSIX only requires support for positive values,
  so dates before the system's epoch may not work on all operating systems.


pkgId: 520d631b35f3de8ec4b2d718b6935bc6f205eb069901e57ee68450a6b23aa220
name: perl-constant
arch: noarch
version: 1.27
epoch: 0
release: 2.el7
summary: Perl pragma to declare constants
url: http://search.cpan.org/dist/constant/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-constant-1.27-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-constant-1.27-2.el7.noarch.rpm
checksum_type: sha256
description:
  This pragma allows you to declare constants at compile-time:

  use constant PI => 4 * atan2(1, 1);

  When you declare a constant such as "PI" using the method shown above,
  each machine your script runs upon can have as many digits of accuracy
  as it can use. Also, your program will be easier to read, more likely
  to be maintained (and maintained correctly), and far less likely to
  send a space probe to the wrong planet because nobody noticed the one
  equation in which you wrote 3.14195.

  When a constant is used in an expression, Perl replaces it with its
  value at compile time, and may then optimize the expression further.
  In particular, any code in an "if (CONSTANT)" block will be optimized
  away if the constant is false.


pkgId: 5186a9b04f93be25d93b83d06d9dc99b72f779acd9b805d2f66cfbc2aa43f08e
name: perl-macros
arch: x86_64
version: 5.16.3
epoch: 4
release: 286.el7
summary: Macros for rpmbuild
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-5.16.3-286.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-macros-5.16.3-286.el7.x86_64.rpm
checksum_type: sha256
description:
  Macros for rpmbuild are needed during build of srpm in koji. This
  sub-package must be installed into buildroot, so it will be needed
  by perl. Perl is needed because of git.


pkgId: b3a85c1dc2287b14886b364a48e71a7d6f29065e3b869d20818bec4c3c66cc72
name: perl-parent
arch: noarch
version: 0.225
epoch: 1
release: 244.el7
summary: Establish an ISA relationship with base classes at compile time
url: http://search.cpan.org/dist/parent/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-parent-0.225-244.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-parent-0.225-244.el7.noarch.rpm
checksum_type: sha256
description:
  Allows you to both load one or more modules, while setting up inheritance
  from those modules at the same time. Mostly similar in effect to:

  	package Baz;

  	BEGIN {
  		require Foo;
  		require Bar;

  		push @ISA, qw(Foo Bar);
  	}


pkgId: 88a9303bd79fb280bd9e066794416915c4faea623c6f8d08eb079bcfe25a952f
name: perl-podlators
arch: noarch
version: 2.5.1
epoch: 0
release: 3.el7
summary: Format POD source into various output formats
url: http://search.cpan.org/dist/podlators/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-podlators-2.5.1-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-podlators-2.5.1-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains Pod::Man and Pod::Text modules which convert POD input
  to *roff source output, suitable for man pages, or plain text.  It also
  includes several sub-classes of Pod::Text for formatted output to terminals
  with various capabilities.


pkgId: b02cc84f987b549ee70037830d26721079f66b0044a861077cd67cd876c2dbd5
name: perl-threads
arch: x86_64
version: 1.87
epoch: 0
release: 4.el7
summary: Perl interpreter-based threads
url: http://search.cpan.org/dist/threads/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-threads-1.87-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-threads-1.87-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Since Perl 5.8, thread programming has been available using a model called
  interpreter threads which provides a new Perl interpreter for each thread,
  and, by default, results in no data or state information being shared
  between threads.

  (Prior to Perl 5.8, 5005threads was available through the "Thread.pm" API.
  This threading model has been deprecated, and was removed as of Perl 5.10.0.)


pkgId: 1208dc4e80f4cd66cfa19c53478d89ac5b93d922256b7612bab9d5c11a6ef821
name: perl-threads-shared
arch: x86_64
version: 1.43
epoch: 0
release: 6.el7
summary: Perl extension for sharing data structures between threads
url: http://search.cpan.org/dist/threads-shared/
rpm_license: GPL+ or Artistic
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: perl-threads-shared-1.43-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/perl-threads-shared-1.43-6.el7.x86_64.rpm
checksum_type: sha256
description:
  By default, variables are private to each thread, and each newly created
  thread gets a private copy of each existing variable. This module allows
  you to share variables across different threads (and pseudo-forks on
  Win32). It is used together with the threads module.


pkgId: 7c188fb8a136125f11ac925cea59b0554f434f248867a7c61e873bf8f42de3c5
name: pinentry
arch: x86_64
version: 0.8.1
epoch: 0
release: 14.el7
summary: Collection of simple PIN or passphrase entry dialogs
url: http://www.gnupg.org/aegypten/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pinentry-0.8.1-14.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pinentry-0.8.1-14.el7.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the curses (text) based version of the PIN entry dialog.


pkgId: a192ccb7b0d4931036ac16f4cac1fb5858329f70ab564d5f45d73578f67a94a7
name: pkgconfig
arch: x86_64
version: 0.27.1
epoch: 1
release: 4.el7
summary: A tool for determining compilation options
url: http://pkgconfig.freedesktop.org
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pkgconfig-0.27.1-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pkgconfig-0.27.1-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The pkgconfig tool determines compilation options. For each required
  library, it reads the configuration file and outputs the necessary
  compiler and linker flags.


pkgId: 0a87acd6de06ee5c85cf17558650c818aa2401bc3212636cb32dc90574bbf136
name: plymouth
arch: x86_64
version: 0.8.9
epoch: 0
release: 0.24.20140113.el7.centos
summary: Graphical Boot Animation and Logger
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: plymouth-0.8.9-0.24.20140113.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/plymouth-0.8.9-0.24.20140113.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  Plymouth provides an attractive graphical boot animation in
  place of the text messages that normally get shown.  Text
  messages are instead redirected to a log file for viewing
  after boot.


pkgId: 3b6021d6945e99193578ac377f8888cb7c460c54ff6293047190db42adae610e
name: plymouth-plugin-script
arch: x86_64
version: 0.8.9
epoch: 0
release: 0.24.20140113.el7.centos
summary: Plymouth "script" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: plymouth-0.8.9-0.24.20140113.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/plymouth-plugin-script-0.8.9-0.24.20140113.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package contains the "script" boot splash plugin for
  Plymouth. It features an extensible, scriptable boot splash
  language that simplifies the process of designing custom
  boot splash themes.


pkgId: 224857d1561e7ac94a44c91142f5cce15d245b8d8c9d13fe991f335940e0cbfc
name: policycoreutils
arch: x86_64
version: 2.2.5
epoch: 0
release: 20.el7
summary: SELinux policy core utilities
url: http://www.selinuxproject.org
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: policycoreutils-2.2.5-20.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/policycoreutils-2.2.5-20.el7.x86_64.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  policycoreutils contains the policy core utilities that are required
  for basic operation of a SELinux system.  These utilities include
  load_policy to load policies, setfiles to label filesystems, newrole
  to switch roles.


pkgId: 0244fea0cbe0908435693a5b643a3ef4109a12fd56a632215d74fa96aa934bfa
name: popt
arch: x86_64
version: 1.13
epoch: 0
release: 16.el7
summary: C library for parsing command line parameters
url: http://www.rpm5.org/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: popt-1.13-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/popt-1.13-16.el7.x86_64.rpm
checksum_type: sha256
description:
  Popt is a C library for parsing command line parameters. Popt was
  heavily influenced by the getopt() and getopt_long() functions, but
  it improves on them by allowing more powerful argument expansion.
  Popt can parse arbitrary argv[] style arrays and automatically set
  variables based on command line arguments. Popt allows command line
  arguments to be aliased via configuration files and includes utility
  functions for parsing arbitrary strings into argv[] arrays using
  shell-like rules.


pkgId: d99e71f01ae8e7c95cef1a95664d50ecc40c70710404dc364ddc31c32fa3ad7f
name: portreserve
arch: x86_64
version: 0.0.5
epoch: 0
release: 10.el7
summary: TCP port reservation utility
url: http://cyberelk.net/tim/portreserve/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: portreserve-0.0.5-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/portreserve-0.0.5-10.el7.x86_64.rpm
checksum_type: sha256
description:
  The portreserve program aims to help services with well-known ports that
  lie in the portmap range.  It prevents portmap from a real service's port
  by occupying it itself, until the real service tells it to release the
  port (generally in the init script).


pkgId: 2921da19dfe18e5ac53e9606feda63eebab6c7d38419a07dd17a58c093b04116
name: procps-ng
arch: x86_64
version: 3.3.10
epoch: 0
release: 5.el7_2
summary: System and process monitoring utilities
url: https://sourceforge.net/projects/procps-ng/
rpm_license: GPL+ and GPLv2 and GPLv2+ and GPLv3+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: procps-ng-3.3.10-5.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/procps-ng-3.3.10-5.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The procps package contains a set of system utilities that provide
  system information. Procps includes ps, free, skill, pkill, pgrep,
  snice, tload, top, uptime, vmstat, w, watch and pwdx. The ps command
  displays a snapshot of running processes. The top command provides
  a repetitive update of the statuses of running processes. The free
  command displays the amounts of free and used memory on your
  system. The skill command sends a terminate command (or another
  specified signal) to a specified set of processes. The snice
  command is used to change the scheduling priority of specified
  processes. The tload command prints a graph of the current system
  load average to a specified tty. The uptime command displays the
  current time, how long the system has been running, how many users
  are logged on, and system load averages for the past one, five,
  and fifteen minutes. The w command displays a list of the users
  who are currently logged on and what they are running. The watch
  program watches a running program. The vmstat command displays
  virtual memory statistics about processes, memory, paging, block
  I/O, traps, and CPU activity. The pwdx command reports the current
  working directory of a process or processes.


pkgId: b24db3fdeedfaf79ead9b8073bcc8ad154da20ba7c23fdf87be870998d1c2d55
name: psmisc
arch: x86_64
version: 22.20
epoch: 0
release: 9.el7
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: psmisc-22.20-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/psmisc-22.20-9.el7.x86_64.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs
  of processes that are using specified files or filesystems.


pkgId: 59375c6b77cf69a6e00dde70be0a36f4347b36ab2ec4f80b14e4ccfed83b7e3d
name: pth
arch: x86_64
version: 2.0.7
epoch: 0
release: 23.el7
summary: The GNU Portable Threads library
url: http://www.gnu.org/software/pth/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pth-2.0.7-23.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pth-2.0.7-23.el7.x86_64.rpm
checksum_type: sha256
description:
  Pth is a very portable POSIX/ANSI-C based library for Unix platforms
  which provides non-preemptive priority-based scheduling for multiple
  threads of execution ("multithreading") inside server applications.
  All threads run in the same address space of the server application,
  but each thread has it's own individual program-counter, run-time
  stack, signal mask and errno variable.


pkgId: 8a1517ce3b26642227b57dff96a68f3bf1d6e10ff606302bbd460a855ba25ea1
name: pygpgme
arch: x86_64
version: 0.3
epoch: 0
release: 9.el7
summary: Python module for working with OpenPGP messages
url: http://cheeseshop.python.org/pypi/pygpgme
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pygpgme-0.3-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pygpgme-0.3-9.el7.x86_64.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and decrypt
  files using the OpenPGP format.  It is built on top of GNU Privacy Guard and
  the GPGME library.


pkgId: add884c450e5c655d45f0c02823a3c519b13b1c75063507b429d8c6f99426cdc
name: pyliblzma
arch: x86_64
version: 0.5.3
epoch: 0
release: 11.el7
summary: Python bindings for lzma
url: https://launchpad.net/pyliblzma
rpm_license: LGPLv3+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pyliblzma-0.5.3-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pyliblzma-0.5.3-11.el7.x86_64.rpm
checksum_type: sha256
description:
  PylibLZMA provides a python interface for the liblzma library
  to read and write data that has been compressed or can be decompressed
  by Lasse Collin's lzma utils.


pkgId: 03a5ad65da140d089b8eb8e32cedbd0f6111a00cb6289eb3059c901a1a2fdbc8
name: pyserial
arch: noarch
version: 2.6
epoch: 0
release: 5.el7
summary: Python serial port access library
url: http://pyserial.sourceforge.net
rpm_license: Python
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pyserial-2.6-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pyserial-2.6-5.el7.noarch.rpm
checksum_type: sha256
description:
  This module encapsulates the access for the serial port. It provides backends
  for standard Python running on Windows, Linux, BSD (possibly any POSIX
  compilant system) and Jython. The module named "serial" automaticaly selects
  the appropriate backend.


pkgId: cfde0bcfdebecabed6e327ad820d6b8efadb3f36be67823735238473d3ce3fa0
name: python
arch: x86_64
version: 2.7.5
epoch: 0
release: 34.el7
summary: An interpreted, interactive, object-oriented programming language
url: http://www.python.org/
rpm_license: Python
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: python-2.7.5-34.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/python-2.7.5-34.el7.x86_64.rpm
checksum_type: sha256
description:
  Python is an interpreted, interactive, object-oriented programming
  language often compared to Tcl, Perl, Scheme or Java. Python includes
  modules, classes, exceptions, very high level dynamic data types and
  dynamic typing. Python supports interfaces to many system calls and
  libraries, as well as to various windowing systems (X11, Motif, Tk,
  Mac and MFC).

  Programmers can write new built-in modules for Python in C or C++.
  Python can be used as an extension language for applications that need
  a programmable interface.

  Note that documentation for Python is provided in the python-docs
  package.

  This package provides the "python" executable; most of the actual
  implementation is within the "python-libs" package.


pkgId: 2ba73a28235a25fc1352727846cb13eda092c1dc27cab189c115d599a7829084
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 9.el7
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: python-iniparse-0.4-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/python-iniparse-0.4-9.el7.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible
  with the standard library's ConfigParser, preserves structure of INI
  files (order of sections & options, indentation, comments, and blank
  lines are preserved when data is updated), and is more convenient to
  use.


pkgId: 67c8163ff1517cf902c2b0768089ec21197bab2ed7926154864d3be14fca89e0
name: python-libs
arch: x86_64
version: 2.7.5
epoch: 0
release: 34.el7
summary: Runtime libraries for Python
url: http://www.python.org/
rpm_license: Python
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: python-2.7.5-34.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/python-libs-2.7.5-34.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains runtime libraries for use by Python:
  - the libpython dynamic library, for use by applications that embed Python as
  a scripting language, and by the main "python" executable
  - the Python standard library


pkgId: ea1a99a9fab833aeb53fcf8921b7a4e35e4ee781e41f186a3a31142ef4937cc1
name: python-pycurl
arch: x86_64
version: 7.19.0
epoch: 0
release: 17.el7
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPLv2+ or MIT
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: python-pycurl-7.19.0-17.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/python-pycurl-7.19.0-17.el7.x86_64.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: cc438cad8362526955cba1aa3470b101fcdf49332f8ee2353adfa3ead76f5dc1
name: python-six
arch: noarch
version: 1.9.0
epoch: 0
release: 2.el7
summary: Python 2 and 3 compatibility utilities
url: http://pypi.python.org/pypi/six/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: python-six-1.9.0-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/python-six-1.9.0-2.el7.noarch.rpm
checksum_type: sha256
description:
  python-six provides simple utilities for wrapping over differences between
  Python 2 and Python 3.

  This is the Python 2 build of the module.


pkgId: 13f88ab1517410166ee3024a295a5834f3a0daf5f368e36d29993236f74210ff
name: python-urlgrabber
arch: noarch
version: 3.10
epoch: 0
release: 7.el7
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: python-urlgrabber-3.10-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/python-urlgrabber-3.10-7.el7.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: e86490fb23263c415f5c1720d4d5e55c28738eb34f78b7f499e651b156a8e583
name: pyxattr
arch: x86_64
version: 0.5.1
epoch: 0
release: 5.el7
summary: Extended attributes library wrapper for Python
url: http://pyxattr.sourceforge.net/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: pyxattr-0.5.1-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/pyxattr-0.5.1-5.el7.x86_64.rpm
checksum_type: sha256
description:
  Python extension module wrapper for libattr. It allows to query, list,
  add and remove extended attributes from files and directories.


pkgId: ec3eaecd805bac6b8d5626e13f3bb28269cb503a274cac8dbeac9b2d9bf6a9dd
name: qlogic-netxtreme2
arch: x86_64
version: 7.14.09
epoch: 0
release: 1
summary: Qlogic NetXtreme II iSCSI, 1-Gigabit and 10-Gigabit ethernet drivers
rpm_license: GPL
rpm_group: System Environment/Kernel
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: qlogic-netxtreme2-7.14.09-1.src.rpm
location_href: Packages/qlogic-netxtreme2-7.14.09-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains the Qlogic NetXtreme II iSCSI (bnx2i), 1-Gigabit (bnx2) and 10-Gigabit (bnx2x) ethernet drivers.


pkgId: f3e47247b180c9ca84e05329f523440ab3ae245a5fbec86c73d8711159385bbd
name: qrencode-libs
arch: x86_64
version: 3.4.1
epoch: 0
release: 3.el7
summary: QR Code encoding library - Shared libraries
url: http://megaui.net/fukuchi/works/qrencode/index.en.html
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: qrencode-3.4.1-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/qrencode-libs-3.4.1-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The qrencode-libs package contains the shared libraries and header files for
  applications that use qrencode.


pkgId: d30d6155297a934787288b1b6c4804145d318ad267746233e9e8d9c92dd22159
name: quota
arch: x86_64
version: 4.01
epoch: 1
release: 11.el7_2.1
summary: System administration tools for monitoring users' disk usage
url: http://sourceforge.net/projects/linuxquota/
rpm_license: BSD and LGPLv2+ and GPLv2 and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: quota-4.01-11.el7_2.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/quota-4.01-11.el7_2.1.x86_64.rpm
checksum_type: sha256
description:
  The quota package contains system administration tools for monitoring
  and limiting user and or group disk usage per file system.


pkgId: c67f9797a60f011affc1654ad57d174cd056363d3d490b8a1a1d5711ed02e2a4
name: readline
arch: x86_64
version: 6.2
epoch: 0
release: 9.el7
summary: A library for editing typed command lines
url: http://cnswww.cns.cwru.edu/php/chet/readline/rltop.html
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: readline-6.2-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/readline-6.2-9.el7.x86_64.rpm
checksum_type: sha256
description:
  The Readline library provides a set of functions that allow users to
  edit command lines. Both Emacs and vi editing modes are available. The
  Readline library includes additional functions for maintaining a list
  of previously-entered command lines for recalling or editing those
  lines, and for performing csh-like history expansion on previous
  commands.


pkgId: 755e9ee6832b4c6c4dfad9d05d7b6405f9d203e6fc9d40cf0cc4f59195c0ef1c
name: redhat-lsb-core
arch: x86_64
version: 4.1
epoch: 0
release: 27.el7.centos.1
summary: LSB Core module support
url: http://www.linuxfoundation.org/collaborate/workgroups/lsb
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: redhat-lsb-4.1-27.el7.centos.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/redhat-lsb-core-4.1-27.el7.centos.1.x86_64.rpm
checksum_type: sha256
description:
  The Linux Standard Base (LSB) Core module support provides the fundamental
  system interfaces, libraries, and runtime environment upon which all conforming
  applications and libraries depend.


pkgId: a7050df75a6bc0eadc4e1330d7d95967e7cce3ca894d0ada281b2236c9048efe
name: redhat-lsb-submod-security
arch: x86_64
version: 4.1
epoch: 0
release: 27.el7.centos.1
summary: LSB Security submodule support
url: http://www.linuxfoundation.org/collaborate/workgroups/lsb
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: redhat-lsb-4.1-27.el7.centos.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/redhat-lsb-submod-security-4.1-27.el7.centos.1.x86_64.rpm
checksum_type: sha256
description:
  The Linux Standard Base (LSB) Security submodule specifications define
  components that are required to be present on an LSB conforming system.


pkgId: 226231f46c85966b74db9090ec81f493f6a370e6732c953312dc515dda1ea924
name: rootfiles
arch: noarch
version: 8.1
epoch: 0
release: 11.el7
summary: The basic required files for the root user's directory
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: rootfiles-8.1-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/rootfiles-8.1-11.el7.noarch.rpm
checksum_type: sha256
description:
  The rootfiles package contains basic required files that are placed
  in the root user's account.  These files are basically the same
  as those in /etc/skel, which are placed in regular
  users' home directories.


pkgId: 6ec383e018671b87157b83baca6e60b8cdf557d28cfe9dc72780a5927667388d
name: rpcbind
arch: x86_64
version: 0.2.0
epoch: 0
release: 33.el7_2
summary: Universal Addresses to RPC Program Number Mapper
url: http://nfsv4.bullopensource.org
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: rpcbind-0.2.0-33.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/rpcbind-0.2.0-33.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The rpcbind utility is a server that converts RPC program numbers into
  universal addresses.  It must be running on the host to be able to make
  RPC calls on a server on that machine.


pkgId: ef679a48e27d68bac27719663ccfc903d36a42dda2596731de100e7e29d22f8a
name: rpm
arch: x86_64
version: 4.11.3
epoch: 0
release: 17.el7
summary: The RPM package management system
url: http://www.rpm.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: rpm-4.11.3-17.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/rpm-4.11.3-17.el7.x86_64.rpm
checksum_type: sha256
description:
  The RPM Package Manager (RPM) is a powerful command line driven
  package management system capable of installing, uninstalling,
  verifying, querying, and updating software packages. Each software
  package consists of an archive of files along with information about
  the package like its version, a description, etc.


pkgId: 79d05d8abd8895713466099aa492a3f552cf131303348462e529763ddbe145c8
name: rpm-python
arch: x86_64
version: 4.11.3
epoch: 0
release: 17.el7
summary: Python bindings for apps which will manipulate RPM packages
url: http://www.rpm.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: rpm-4.11.3-17.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/rpm-python-4.11.3-17.el7.x86_64.rpm
checksum_type: sha256
description:
  The rpm-python package contains a module that permits applications
  written in the Python programming language to use the interface
  supplied by RPM Package Manager libraries.

  This package should be installed if you want to develop Python
  programs that will manipulate RPM packages and databases.


pkgId: 6cb13336342af2f38971a665c9a38c4edd41e5677ded1cbf4e78d9b6c3a4c87c
name: rrd2csv
arch: x86_64
version: 1.0.2
epoch: 0
release: 1.el7.centos
summary: Tool for converting Xen API RRDs to CSV
url: https://github.com/xenserver/rrd2csv/
rpm_license: LGPL+linking exception
rpm_group: System/Hypervisor
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: rrd2csv-1.0.2-1.el7.centos.src.rpm
location_href: Packages/rrd2csv-1.0.2-1.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package contains the rrd2csv tool, useful to expose live RRDD metrics on
  standard output, in the CSV format.


pkgId: 58c71d1c68025bdf8672411125ab45461e1bdd5d4c6fdb30b20601ad05ff90e6
name: rsync
arch: x86_64
version: 3.0.9
epoch: 0
release: 17.el7
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: rsync-3.0.9-17.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/rsync-3.0.9-17.el7.x86_64.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: 81adc7fe65611338a7366748307d3049438a3740fd5cb5d0f8a6b15f17c537ac
name: rsyslog
arch: x86_64
version: 7.4.7
epoch: 0
release: 12.el7
summary: Enhanced system logging and kernel message trapping daemon
url: http://www.rsyslog.com/
rpm_license: (GPLv3+ and ASL 2.0)
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: rsyslog-7.4.7-12.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/rsyslog-7.4.7-12.el7.x86_64.rpm
checksum_type: sha256
description:
  Rsyslog is an enhanced, multi-threaded syslog daemon. It supports MySQL,
  syslog/TCP, RFC 3195, permitted sender lists, filtering on any message part,
  and fine grain output format control. It is compatible with stock sysklogd
  and can be used as a drop-in replacement. Rsyslog is simple to set up, with
  advanced features suitable for enterprise-class, encryption-protected syslog
  relay chains.


pkgId: e5d97909ea5b5d5bddf0d7fc866a3cdcb38718e105dd937a9ea5a9885fdb80e8
name: samba-client
arch: x86_64
version: 4.2.3
epoch: 0
release: 12.el7_2
summary: Samba client programs
url: http://www.samba.org/
rpm_license: GPLv3+ and LGPLv3+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: samba-4.2.3-12.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/samba-client-4.2.3-12.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The samba4-client package provides some SMB/CIFS clients to complement
  the built-in SMB/CIFS filesystem in Linux. These clients allow access
  of SMB/CIFS shares and printing to SMB/CIFS printers.


pkgId: c5332ddded747754fb483e2988e4eda44eac02dccad744fa7a7a5c06d62a0124
name: samba-libs
arch: x86_64
version: 4.2.3
epoch: 0
release: 12.el7_2
summary: Samba libraries
url: http://www.samba.org/
rpm_license: GPLv3+ and LGPLv3+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: samba-4.2.3-12.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/samba-libs-4.2.3-12.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The samba4-libs package contains the libraries needed by programs that
  link against the SMB, RPC and other protocols provided by the Samba suite.


pkgId: aaa03041d3be50c5eccdbd0475eb1cfd1fb3175e1821dbe8ccb6b5eb2181cdf4
name: samba-winbind
arch: x86_64
version: 4.2.3
epoch: 0
release: 12.el7_2
summary: Samba winbind
url: http://www.samba.org/
rpm_license: GPLv3+ and LGPLv3+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: samba-4.2.3-12.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/samba-winbind-4.2.3-12.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The samba-winbind package provides the winbind NSS library, and some
  client tools.  Winbind enables Linux to be a full member in Windows
  domains and to use Windows user and group accounts on Linux.


pkgId: 126637dc6f8d18974813bc68a261a0d2091d95ecab53e8b10aaeab625a58caa9
name: samba-winbind-modules
arch: x86_64
version: 4.2.3
epoch: 0
release: 12.el7_2
summary: Samba winbind modules
url: http://www.samba.org/
rpm_license: GPLv3+ and LGPLv3+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: samba-4.2.3-12.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/samba-winbind-modules-4.2.3-12.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The samba-winbind-modules package provides the NSS library and a PAM
  module necessary to communicate to the Winbind Daemon


pkgId: a9abae0379f53c8cb9c50808f3b7e16b09b99a414f319afd9d366e07eaf0e86f
name: screen
arch: x86_64
version: 4.1.0
epoch: 0
release: 0.23.20120314git3c2946.el7_2
summary: A screen manager that supports multiple logins on one terminal
url: http://www.gnu.org/software/screen
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: screen-4.1.0-0.23.20120314git3c2946.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/screen-4.1.0-0.23.20120314git3c2946.el7_2.x86_64.rpm
checksum_type: sha256
description:
  The screen utility allows you to have multiple logins on just one
  terminal. Screen is useful for users who telnet into a machine or are
  connected via a dumb terminal, but want to use more than just one
  login.

  Install the screen package if you need a screen manager that can
  support multiple logins on one terminal.


pkgId: ac5c650478fbe561e27ca47e7fb767139335b32410f3ba5e7c14d41a7f57f456
name: sed
arch: x86_64
version: 4.2.2
epoch: 0
release: 5.el7
summary: A GNU stream text editor
url: http://sed.sourceforge.net/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Text
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: sed-4.2.2-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/sed-4.2.2-5.el7.x86_64.rpm
checksum_type: sha256
description:
  The sed (Stream EDitor) editor is a stream or batch (non-interactive)
  editor.  Sed takes text as input, performs an operation or set of
  operations on the text and outputs the modified text.  The operations
  that sed performs (substitutions, deletions, insertions, etc.) can be
  specified in a script file or from the command line.


pkgId: ac4f92a001d0b6cf09ac1a8a82b98cc19e2a44482ffd692c23e8e61dc92c12da
name: setup
arch: noarch
version: 2.8.71
epoch: 0
release: 6.el7
summary: A set of system configuration and setup files
url: https://fedorahosted.org/setup/
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: setup-2.8.71-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/setup-2.8.71-6.el7.noarch.rpm
checksum_type: sha256
description:
  The setup package contains a set of important system configuration and
  setup files, such as passwd, group, and profile.


pkgId: 25376ec089e794ee06d49f97bfe85ea73984e840ac208e697038bdc024ea33fd
name: sg3_utils
arch: x86_64
version: 1.37
epoch: 0
release: 5.el7
summary: Utilities for devices that use SCSI command sets
url: http://sg.danny.cz/sg/sg3_utils.html
rpm_license: GPLv2+ and BSD
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: sg3_utils-1.37-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/sg3_utils-1.37-5.el7.x86_64.rpm
checksum_type: sha256
description:
  Collection of Linux utilities for devices that use the SCSI command set.
  Includes utilities to copy data based on "dd" syntax and semantics (called
  sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
  mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
  disks (sg_start); do self tests (sg_senddiag); and various other functions.
  See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
  series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
  must be used. In the 2.6 series other device names may be used as
  well (e.g. /dev/sda).

  Warning: Some of these tools access the internals of your system
  and the incorrect usage of them may render your system inoperable.


pkgId: 8b1b07a635eb321e238eaf72e571e997536d0016d75a85e4377791e6a542b54c
name: shadow-utils
arch: x86_64
version: 4.1.5.1
epoch: 2
release: 18.el7
summary: Utilities for managing accounts and shadow password files
url: http://pkg-shadow.alioth.debian.org/
rpm_license: BSD and GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: shadow-utils-4.1.5.1-18.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/shadow-utils-4.1.5.1-18.el7.x86_64.rpm
checksum_type: sha256
description:
  The shadow-utils package includes the necessary programs for
  converting UNIX password files to the shadow password format, plus
  programs for managing user and group accounts. The pwconv command
  converts passwords to the shadow password format. The pwunconv command
  unconverts shadow passwords and generates a passwd file (a standard
  UNIX password file). The pwck command checks the integrity of password
  and shadow files. The lastlog command prints out the last login times
  for all users. The useradd, userdel, and usermod commands are used for
  managing user accounts. The groupadd, groupdel, and groupmod commands
  are used for managing group accounts.


pkgId: e463d567a55f144f4f4c1f86a631e984a6f423776acba9e740ba57099de01a27
name: shared-mime-info
arch: x86_64
version: 1.1
epoch: 0
release: 9.el7
summary: Shared MIME information database
url: http://freedesktop.org/Software/shared-mime-info
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: shared-mime-info-1.1-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/shared-mime-info-1.1-9.el7.x86_64.rpm
checksum_type: sha256
description:
  This is the freedesktop.org shared MIME info database.

  Many programs and desktops use the MIME system to represent the types of
  files. Frequently, it is necessary to work out the correct MIME type for
  a file. This is generally done by examining the file's name or contents,
  and looking up the correct MIME type in a database.


pkgId: 7e2fe1db340e4f52454b7cf534cfafe734c08f5f67101fa4ccbce5df00a332cb
name: sharutils
arch: x86_64
version: 4.13.3
epoch: 0
release: 8.el7
summary: The GNU shar utilities for packaging and unpackaging shell archives
url: http://www.gnu.org/software/sharutils/
rpm_license: GPLv3+ and LGPLv3+ and (LGPLv3+ or BSD) and LGPLv2+ and Public Domain and GFDL
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: sharutils-4.13.3-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/sharutils-4.13.3-8.el7.x86_64.rpm
checksum_type: sha256
description:
  The sharutils package contains the GNU shar utilities, a set of tools
  for encoding and decoding packages of files (in binary or text format)
  in a special plain text format called shell archives (shar).  This
  format can be sent through e-mail (which can be problematic for regular
  binary files).  The shar utility supports a wide range of capabilities
  (compressing, uuencoding, splitting long files for multi-part
  mailings, providing check-sums), which make it very flexible at
  creating shar files.  After the files have been sent, the unshar tool
  scans mail messages looking for shar files.  Unshar automatically
  strips off mail headers and introductory text and then unpacks the
  shar files.


pkgId: 436ce2be665a083674ba30e2c8d405839c46311e3c5aae8cf66eb3dac24e42f5
name: slang
arch: x86_64
version: 2.2.4
epoch: 0
release: 11.el7
summary: The shared library for the S-Lang extension language
url: http://www.jedsoft.org/slang/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: slang-2.2.4-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/slang-2.2.4-11.el7.x86_64.rpm
checksum_type: sha256
description:
  S-Lang is an interpreted language and a programming library.  The
  S-Lang language was designed so that it can be easily embedded into
  a program to provide the program with a powerful extension language.
  The S-Lang library, provided in this package, provides the S-Lang
  extension language.  S-Lang's syntax resembles C, which makes it easy
  to recode S-Lang procedures in C if you need to.


pkgId: c927bae274f166e2b380fbf48c9bb67b7234b6b23d06432623700b78be72226e
name: sm-rawhba
arch: x86_64
version: 1.17.0
epoch: 0
release: xs.1
summary: rawhba SR type capability
url: https://github.com/xapi-project/sm
rpm_license: LGPL
rpm_group: System/Hypervisor
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: sm-1.17.0-xs.1.src.rpm
location_href: Packages/sm-rawhba-1.17.0-xs.1.x86_64.rpm
checksum_type: sha256
description:
  This package adds a new rawhba SR type. This SR type allows utilization of
  Fiber Channel raw LUNs as separate VDIs (LUN per VDI)


pkgId: f4d2a5c7baed52776a1477240847e8811ccccdc23641efa717e869667d0b6690
name: smartmontools
arch: x86_64
version: 6.2
epoch: 1
release: 4.el7
summary: Tools for monitoring SMART capable hard disks
url: http://smartmontools.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: smartmontools-6.2-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/smartmontools-6.2-4.el7.x86_64.rpm
checksum_type: sha256
description:
  The smartmontools package contains two utility programs (smartctl
  and smartd) to control and monitor storage systems using the Self-
  Monitoring, Analysis and Reporting Technology System (SMART) built
  into most modern ATA and SCSI hard disks. In many cases, these
  utilities will provide advanced warning of disk degradation and
  failure.


pkgId: efa58321d4a06b9868325b2c758af889deaa60642ce279a435c5be474dfc2d2f
name: spax
arch: x86_64
version: 1.5.2
epoch: 0
release: 13.el7
summary: Portable archive exchange
url: http://cdrecord.berlios.de/old/private/star.html
rpm_license: CDDL
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: star-1.5.2-13.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/spax-1.5.2-13.el7.x86_64.rpm
checksum_type: sha256
description:
  The pax utility shall read and write archives, write lists of the members of
  archive files and copy directory hierarchies as is defined in IEEE Std 1003.1.


pkgId: f83373a5756e54989a8408a082aa7c29fae88064d13cf0944f9b861749b1e305
name: sqlite
arch: x86_64
version: 3.7.17
epoch: 0
release: 8.el7
summary: Library that implements an embeddable SQL database engine
url: http://www.sqlite.org/
rpm_license: Public Domain
rpm_vendor: CentOS
rpm_group: Applications/Databases
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: sqlite-3.7.17-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/sqlite-3.7.17-8.el7.x86_64.rpm
checksum_type: sha256
description:
  SQLite is a C library that implements an SQL database engine. A large
  subset of SQL92 is supported. A complete database is stored in a
  single disk file. The API is designed for convenience and ease of use.
  Applications that link against SQLite can enjoy the power and
  flexibility of an SQL database without the administrative hassles of
  supporting a separate database server.  Version 2 and version 3 binaries
  are named to permit each to be installed on a single host


pkgId: 198c6e65c3c7e66a05e58e81e6e54e3660f3863f4a0a3ebede76fe9a71ec1ba2
name: ssmtp
arch: x86_64
version: 2.64
epoch: 0
release: 14.el7
summary: Extremely simple MTA to get mail off the system to a Mailhub
url: http://packages.debian.org/stable/mail/ssmtp
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: buildvm-27.phx2.fedoraproject.org
rpm_sourcerpm: ssmtp-2.64-14.el7.src.rpm
rpm_packager: Fedora Project
location_href: Packages/ssmtp-2.64-14.el7.x86_64.rpm
checksum_type: sha256
description:
  A secure, effective and simple way of getting mail off a system to your mail
  hub. It contains no suid-binaries or other dangerous things - no mail spool
  to poke around in, and no daemons running in the background. Mail is simply
  forwarded to the configured mailhost. Extremely easy configuration.

  WARNING: the above is all it does; it does not receive mail, expand aliases
  or manage a queue. That belongs on a mail hub with a system administrator.


pkgId: a7243b7cfe38eed22d4736845334b866975b3abaccfc057abf7dcd1039821ada
name: strace
arch: x86_64
version: 4.9
epoch: 0
release: xs26
summary: Tracks and displays system calls associated with a running process
rpm_license: BSD
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: strace-4.9-xs26.src.rpm
location_href: Packages/strace-4.9-xs26.x86_64.rpm
checksum_type: sha256
description:
  The strace program intercepts and records the system calls called and
  received by a running process.  Strace can print a record of each
  system call, its arguments and its return value.  Strace is useful for
  diagnosing problems and debugging, as well as for instructional
  purposes.

  Install strace if you need a tool to track the system calls made and
  received by a process.


pkgId: 66ff67a802d2f8fec0ce1c386f5b983feb657eca44ebd2d901dfe8268126c6e6
name: stunnel_xs
arch: x86_64
version: 4.56
epoch: 0
release: 5.el7.centos.xs1
summary: An SSL-encrypting socket wrapper
url: http://www.stunnel.org/
rpm_license: GPLv2
rpm_group: Applications/Internet
rpm_buildhost: 317f4e9b6e0f
rpm_sourcerpm: stunnel_xs-4.56-5.el7.centos.xs1.src.rpm
location_href: Packages/stunnel_xs-4.56-5.el7.centos.xs1.x86_64.rpm
checksum_type: sha256
description:
  Stunnel is a socket wrapper which can provide SSL (Secure Sockets
  Layer) support to ordinary applications. For example, it can be used
  in conjunction with imapd to create an SSL secure IMAP server.


pkgId: 739fbfb38b97d838f33c6d249181d939d91aa1599ed2b19901bfa37b80e8ae84
name: sudo
arch: x86_64
version: 1.8.6p7
epoch: 0
release: 17.el7_2
summary: Allows restricted root access for specified users
url: http://www.courtesan.com/sudo/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: sudo-1.8.6p7-17.el7_2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/sudo-1.8.6p7-17.el7_2.x86_64.rpm
checksum_type: sha256
description:
  Sudo (superuser do) allows a system administrator to give certain
  users (or groups of users) the ability to run some (or all) commands
  as root while logging all commands and arguments. Sudo operates on a
  per-command basis.  It is not a replacement for the shell.  Features
  include: the ability to restrict what commands a user may run on a
  per-host basis, copious logging of each command (providing a clear
  audit trail of who did what), a configurable timeout of the sudo
  command, and the ability to use the same configuration file (sudoers)
  on many different machines.


pkgId: 413fdf76fdacc0d9c4c3aee1b1524ee5d109dfa75344d05c92270285375b8010
name: sysstat
arch: x86_64
version: 10.1.5
epoch: 0
release: 7.el7
summary: Collection of performance monitoring tools for Linux
url: http://sebastien.godard.pagesperso-orange.fr/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: sysstat-10.1.5-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/sysstat-10.1.5-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The sysstat package contains sar, sadf, mpstat, iostat, pidstat, nfsiostat,
  cifsiostat and sa tools for Linux.
  The sar command collects and reports system activity information. This
  information can be saved in a file in a binary format for future inspection. The
  statistics reported by sar concern I/O transfer rates, paging activity,
  process-related activities, interrupts, network activity, memory and swap space
  utilization, CPU utilization, kernel activities and TTY statistics, among
  others. Both UP and SMP machines are fully supported.
  The sadf command may be used to display data collected by sar in various formats
  (CSV, XML, etc.).
  The iostat command reports CPU utilization and I/O statistics for disks.
  The mpstat command reports global and per-processor statistics.
  The pidstat command reports statistics for Linux tasks (processes).
  The nfsiostat command reports I/O statistics for network file systems.
  The cifsiostat command reports I/O statistics for CIFS file systems.


pkgId: 02df962269083eb6acda5ebef268d58e36e2af6d4b0471f437ea4fe9626fd556
name: system-config-firewall-base
arch: noarch
version: 1.2.29
epoch: 0
release: 10.el7
summary: system-config-firewall base components and command line tool
url: http://fedorahosted.org/system-config-firewall
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: system-config-firewall-1.2.29-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/system-config-firewall-base-1.2.29-10.el7.noarch.rpm
checksum_type: sha256
description:
  Base components of system-config-firewall with lokkit, the command line tool
  for basic firewall setup.


pkgId: 8119664f4983e16180db0d2297e09ab35dd47df52fbd557d30defb8d676b24cb
name: systemd
arch: x86_64
version: 219
epoch: 0
release: 19.el7_2.7.xs7
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPLv2+ and MIT and GPLv2+
rpm_group: Unspecified
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: systemd-219-19.el7_2.7.xs7.src.rpm
location_href: Packages/systemd-219-19.el7_2.7.xs7.x86_64.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: 6f1a916dc35868297dd6040e368424b289ac41ab212e38c21033cc90185b9773
name: systemtap-runtime
arch: x86_64
version: 3.0
epoch: 0
release: 4.el7.centos
summary: Programmable system-wide instrumentation system - runtime
url: http://sourceware.org/systemtap/
rpm_license: GPLv2+
rpm_group: Development/System
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: systemtap-3.0-4.el7.centos.src.rpm
location_href: Packages/systemtap-runtime-3.0-4.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  SystemTap runtime contains the components needed to execute
  a systemtap script that was already compiled into a module
  using a local or remote systemtap-devel installation.


pkgId: 70830eb2f04808062cf5f57a2e826583a4cff2dfc16a22e0f6ef095f5dd3fa66
name: tar
arch: x86_64
version: 1.26
epoch: 2
release: 29.el7
summary: A GNU file archiving program
url: http://www.gnu.org/software/tar/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: tar-1.26-29.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tar-1.26-29.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU tar program saves many files together in one archive and can
  restore individual files (or all of the files) from that archive. Tar
  can also be used to add supplemental files to an archive and to update
  or list files in the archive. Tar includes multivolume support,
  automatic archive compression/decompression, the ability to perform
  remote archives, and the ability to perform incremental and full
  backups.

  If you want to use tar for remote backups, you also need to install
  the rmt package on the remote box.


pkgId: ce168aaf07c6bdbb5b7df7438964687512f59a44b0231ca90ae20d0c352239a4
name: tcl
arch: x86_64
version: 8.5.13
epoch: 1
release: 8.el7
summary: Tool Command Language, pronounced tickle
url: http://tcl.sourceforge.net/
rpm_license: TCL
rpm_vendor: CentOS
rpm_group: Development/Languages
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: tcl-8.5.13-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tcl-8.5.13-8.el7.x86_64.rpm
checksum_type: sha256
description:
  The Tcl (Tool Command Language) provides a powerful platform for
  creating integration applications that tie together diverse
  applications, protocols, devices, and frameworks. When paired with the
  Tk toolkit, Tcl provides a fastest and powerful way to create
  cross-platform GUI applications.  Tcl can also be used for a variety
  of web-related tasks and for creating powerful command languages for
  applications.


pkgId: e482380059942f86bdb8048e2617da485f81aa86d605e3e32b2b69c081f45137
name: tcp_wrappers
arch: x86_64
version: 7.6
epoch: 0
release: 77.el7
summary: A security tool which acts as a wrapper for TCP daemons
url: ftp://ftp.porcupine.org/pub/security/index.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: tcp_wrappers-7.6-77.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tcp_wrappers-7.6-77.el7.x86_64.rpm
checksum_type: sha256
description:
  The tcp_wrappers package provides small daemon programs which can
  monitor and filter incoming requests for systat, finger, FTP, telnet,
  rlogin, rsh, exec, tftp, talk and other network services.

  Install the tcp_wrappers program if you need a security tool for
  filtering incoming network services requests.

  This version also supports IPv6.


pkgId: afc304d5e639c6b49e3a3aabf705cb844710ae31ea9d75221750ca17c82f1c8e
name: tcpdump
arch: x86_64
version: 4.5.1
epoch: 14
release: 3.el7
summary: A network traffic monitoring tool
url: http://www.tcpdump.org
rpm_license: BSD with advertising
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: tcpdump-4.5.1-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tcpdump-4.5.1-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Tcpdump is a command-line tool for monitoring network traffic.
  Tcpdump can capture and display the packet headers on a particular
  network interface or on all interfaces.  Tcpdump can display all of
  the packet headers, or just the ones that match particular criteria.

  Install tcpdump if you need a program to monitor network traffic.


pkgId: a27e3a55711bb0815a04a5145f933c2067084ef6a873f8c1cd5eb6e73cff2280
name: telnet
arch: x86_64
version: 0.17
epoch: 1
release: 59.el7
summary: The client program for the Telnet remote login protocol
url: http://web.archive.org/web/20070819111735/www.hcs.harvard.edu/~dholland/computers/old-netkit.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: telnet-0.17-59.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/telnet-0.17-59.el7.x86_64.rpm
checksum_type: sha256
description:
  Telnet is a popular protocol for logging into remote systems over the
  Internet. The package provides a command line Telnet client


pkgId: 6efc6656a74eb12a38628698c3ce85d7c6cc6b5edb9ce40680b4210a0687c604
name: time
arch: x86_64
version: 1.7
epoch: 0
release: 45.el7
summary: A GNU utility for monitoring a program's use of system resources
url: http://www.gnu.org/software/time/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: time-1.7-45.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/time-1.7-45.el7.x86_64.rpm
checksum_type: sha256
description:
  The GNU time utility runs another program, collects information about
  the resources used by that program while it is running, and displays
  the results.


pkgId: dfb3b5521961526c9e0e7111a3637af84ed3abe0ed1aef442d1de82ebcf53149
name: trousers
arch: x86_64
version: 0.3.13
epoch: 0
release: 1.el7
summary: TCG's Software Stack v1.2
url: http://trousers.sourceforge.net
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: trousers-0.3.13-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/trousers-0.3.13-1.el7.x86_64.rpm
checksum_type: sha256
description:
  TrouSerS is an implementation of the Trusted Computing Group's Software Stack
  (TSS) specification. You can use TrouSerS to write applications that make use
  of your TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's software
  state using cryptographic hashes and more.


pkgId: 53459c0ab990c4427df137c2cda366369fd484fc9ecc1837370a796173d9d3e3
name: unzip
arch: x86_64
version: 6.0
epoch: 0
release: 15.el7
summary: A utility for unpacking zip files
url: http://www.info-zip.org/UnZip.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: unzip-6.0-15.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/unzip-6.0-15.el7.x86_64.rpm
checksum_type: sha256
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: d43ee4364cd22681d4ce2c0920e24c536e0b6de9c13d3b7dd7aa029189df6b2b
name: ustr
arch: x86_64
version: 1.0.4
epoch: 0
release: 16.el7
summary: String library, very low memory overhead, simple to import
url: http://www.and.org/ustr/
rpm_license: MIT or LGPLv2+ or BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: ustr-1.0.4-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ustr-1.0.4-16.el7.x86_64.rpm
checksum_type: sha256
description:
   Micro string library, very low overhead from plain strdup() (Ave. 44% for
  0-20B strings). Very easy to use in existing C code. At it's simplest you can
  just include a single header file into your .c and start using it.
   This package also distributes pre-built shared libraries.


pkgId: ea3c0397904789fa4fc7b7664f518c0749dc88540503a014d1231bbd5fefef27
name: util-linux
arch: x86_64
version: 2.23.2
epoch: 0
release: 26.el7_2.2
summary: A collection of basic system utilities
url: http://en.wikipedia.org/wiki/Util-linux
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and BSD with advertising and Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: util-linux-2.23.2-26.el7_2.2.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/util-linux-2.23.2-26.el7_2.2.x86_64.rpm
checksum_type: sha256
description:
  The util-linux package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, Util-linux contains the fdisk configuration tool and the login
  program.


pkgId: 5b6f90c5ae7c1bf65733d0377f7b3d980e11358ef4af228c8cd268f2cf1da559
name: vconfig
arch: x86_64
version: 1.9
epoch: 0
release: 16.el7
summary: Linux 802.1q VLAN configuration utility
url: http://www.candelatech.com/~greear/vlan.html
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: buildvm-25.phx2.fedoraproject.org
rpm_sourcerpm: vconfig-1.9-16.el7.src.rpm
rpm_packager: Fedora Project
location_href: Packages/vconfig-1.9-16.el7.x86_64.rpm
checksum_type: sha256
description:
  The vconfig program configures and adjusts 802.1q VLAN parameters.
  This tool is deprecated in favor of "ip link" command.


pkgId: 101f525f204de0106faed45b94fdba7efcc8bde4c88ae3800b82e817b1a2c69b
name: vhostmd
arch: x86_64
version: 0.4
epoch: 0
release: xs29
summary: Virtual Host Metrics Daemon
url: http://www.novell.com
rpm_license: GPL
rpm_group: Application/Productivity
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: vhostmd-0.4-xs29.src.rpm
location_href: Packages/vhostmd-0.4-xs29.x86_64.rpm
checksum_type: sha256
description:
  vhostmd provides a "metrics communication channel" between a host and
  its hosted virtual machines, allowing limited introspection of host
  resource usage from within virtual machines.  This functionality may be
  useful in hosting environments, giving virtual machine administrators
  a limited view of host resource consumption - potentially explaining a
  performance degradation within the virtual machine.

  vhostmd will periodically write metrics to a disk.  The metrics to
  write, how often, and where to write them are all adjustable via the
  /etc/vhostmd/vhostmd.conf configuration file.  The disk can then be
  surfaced read-only to virtual machines using tools provided by the
  virtualization platform of the host.


pkgId: 8ee7ade53fc21eac3d937eeb2753e172286d69c879958f3200bf5048e254d375
name: vim-minimal
arch: x86_64
version: 7.4.160
epoch: 2
release: 1.el7
summary: A minimal version of the VIM editor
url: http://www.vim.org/
rpm_license: Vim
rpm_vendor: CentOS
rpm_group: Applications/Editors
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: vim-7.4.160-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vim-minimal-7.4.160-1.el7.x86_64.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more. The
  vim-minimal package includes a minimal version of VIM, which is
  installed into /bin/vi for use when only the root partition is
  present. NOTE: The online help is only available when the vim-common
  package is installed.


pkgId: de71d4c4fe53b425bad90d972166c4de07bbdfa4bdc221c8fcf04968e19fff83
name: vncsnapshot
arch: x86_64
version: 1.2a
epoch: 0
release: xs17
url: http://vncsnapshot.sourceforge.net/
rpm_license: GPL
rpm_group: Application/Productivity
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: vncsnapshot-1.2a-xs17.src.rpm
location_href: Packages/vncsnapshot-1.2a-xs17.x86_64.rpm
checksum_type: sha256
summary:
  VNC Snapshot is a command-line program for VNC. It will save a JPEG image of the VNC server's screen.

description:
  Snapshot is a command-line program for VNC. It will save a JPEG image of the VNC server's screen.

  Also included with the package is vncpasswd, to allow you to create password files if you do not have a Unix or Linux version of VNC available. Note that while this utility is in the Windows version of VNC Snapshot, it does not create a file usable by the Windows version of the VNC Server.

  VNC Snapshot is derived from Tight VNC [www.tightvnc.com] and Real VNC [www.realvnc.com].

  Sources and binaries can be download from the VNCSnapshot Source Forge site.


pkgId: 9094ca85cb356842ed3fb948cee816ce461324aa92daadc97b7791522ced88f3
name: wget
arch: x86_64
version: 1.14
epoch: 0
release: 10.el7_0.1
summary: A utility for retrieving files using the HTTP or FTP protocols
url: http://www.gnu.org/software/wget/
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: wget-1.14-10.el7_0.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/wget-1.14-10.el7_0.1.x86_64.rpm
checksum_type: sha256
description:
  GNU Wget is a file retrieval utility which can use either the HTTP or
  FTP protocols. Wget features include the ability to work in the
  background while you are logged out, recursive retrieval of
  directories, file name wildcard matching, remote file timestamp
  storage and comparison, use of Rest with FTP servers and Range with
  HTTP servers to retrieve files over slow or unstable connections,
  support for Proxy servers, and configurability.


pkgId: ea01f68c542293f4ace9c00be678a8277e2b502f76621dd5915a9964ccb144ad
name: which
arch: x86_64
version: 2.20
epoch: 0
release: 7.el7
summary: Displays where a particular program in your path is located
url: http://www.xs4all.nl/~carlo17/which/
rpm_license: GPLv3
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: which-2.20-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/which-2.20-7.el7.x86_64.rpm
checksum_type: sha256
description:
  The which command shows the full pathname of a specified program, if
  the specified program is in your PATH.


pkgId: f56925a62222dd5572a7e06b5a8b44406fab5874eea5d2e822ad2ab1d9fbb5a5
name: xdelta
arch: x86_64
version: 3.0.7
epoch: 0
release: 4.el7
summary: A binary file delta generator
url: http://xdelta.org/
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: xdelta-3.0.7-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xdelta-3.0.7-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Xdelta (X for XCF: the eXperimental Computing Facility at Berkeley) is
  a binary delta generator (like a diff program for binaries) and an RCS
  version control replacement library. Xdelta uses a binary file delta
  algorithm to replace the standard diff program used by RCS


pkgId: defeb88f6f78050c685822c206824590826408c30e40c362e4552058bedae252
name: xen-crashdump-analyser
arch: x86_64
version: 2.5.1
epoch: 0
release: 1
summary: Xen crashdump analyser
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: xen-crashdump-analyser-2.5.1-1.src.rpm
location_href: Packages/xen-crashdump-analyser-2.5.1-1.x86_64.rpm
checksum_type: sha256
description:
                        * Xen Crashdump Analyser *
                     --------------------------------
                     a tool for analysing Xen crashes
                     --------------------------------

  See http://xenbits.xen.org/people/andrewcoop/ for detailed usage
  instructions, examples and more.


pkgId: 6a0065070d81463287074fc70e39aac54b33686b50748be223c3635356629215
name: xenserver-status-report
arch: noarch
version: 1.1.1
epoch: 0
release: 313
summary: A program that generates status reports for a XenServer host
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: xenserver-status-report-1.1.1-313.src.rpm
location_href: Packages/xenserver-status-report-1.1.1-313.noarch.rpm
checksum_type: sha256
description:
  The xenserver-status-report package collects various system configuration and state to aid in
  diagnosing issues.


pkgId: ff97df41b7082d70b6d8a3bfd6b6a489e2970d4175b0a292e412ed60088edeb2
name: xsiostat
arch: x86_64
version: 1.0.1
epoch: 0
release: 1.el7.centos
summary: Tool for visualising XenServer VBD metrics
url: https://github.com/xenserver/xsiostat/
rpm_license: LGPL+linking exception
rpm_group: Development/Other
rpm_buildhost: 519e6dbb346d
rpm_sourcerpm: xsiostat-1.0.1-1.el7.centos.src.rpm
location_href: Packages/xsiostat-1.0.1-1.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  The xsiostat is a tool similar to iostat but that consider XenServer components
  such as I/O rings and memory pool buffers.


pkgId: 5f2f34b30f757500071a99b52a828c022e36504cad0e1a98d2f06780325ad561
name: xz
arch: x86_64
version: 5.1.2
epoch: 0
release: 12alpha.el7
summary: LZMA compression utilities
url: http://tukaani.org/xz/
rpm_license: LGPLv2+
rpm_vendor: CentOS
rpm_group: Applications/File
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: xz-5.1.2-12alpha.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xz-5.1.2-12alpha.el7.x86_64.rpm
checksum_type: sha256
description:
  XZ Utils are an attempt to make LZMA compression easy to use on free (as in
  freedom) operating systems. This is achieved by providing tools and libraries
  which are similar to use than the equivalents of the most popular existing
  compression algorithms.

  LZMA is a general purpose compression algorithm designed by Igor Pavlov as
  part of 7-Zip. It provides high compression ratio while keeping the
  decompression speed fast.


pkgId: 73175868db8af63531ec6182d940314c0a365c98e64396e558b359d04a9abbde
name: yajl
arch: x86_64
version: 2.0.4
epoch: 0
release: 4.el7
summary: Yet Another JSON Library (YAJL)
url: http://lloyd.github.com/yajl/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: yajl-2.0.4-4.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yajl-2.0.4-4.el7.x86_64.rpm
checksum_type: sha256
description:
  Yet Another JSON Library. YAJL is a small event-driven
  (SAX-style) JSON parser written in ANSI C, and a small
  validating JSON generator.


pkgId: 134392cf1f794a8bf01c9f130ad55e31e4f7e24b61fc7e1638ca07f6ad5b5b00
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 132.el7.centos.0.1
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: yum-3.4.3-132.el7.centos.0.1.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-3.4.3-132.el7.centos.0.1.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: 45c249eaff5078eb4ddb16554d7b267e0044001e9a392c83ba4a8bb2d2076948
name: zip
arch: x86_64
version: 3.0
epoch: 0
release: 10.el7
summary: A file compression and packaging utility compatible with PKZIP
url: http://www.info-zip.org/Zip.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: zip-3.0-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zip-3.0-10.el7.x86_64.rpm
checksum_type: sha256
description:
  The zip program is a compression and file packaging utility.  Zip is
  analogous to a combination of the UNIX tar and compress commands and
  is compatible with PKZIP (a compression and file packaging utility for
  MS-DOS systems).

  Install the zip package if you need to compress files using the zip
  program.


pkgId: 7bf23a524ee947ba5be369f797c7c5cf0aa05ff9903de96582d475c5eaa926e0
name: zlib
arch: x86_64
version: 1.2.7
epoch: 0
release: 15.el7
summary: The compression and decompression library
url: http://www.zlib.net/
rpm_license: zlib and Boost
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: worker1.bsys.centos.org
rpm_sourcerpm: zlib-1.2.7-15.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zlib-1.2.7-15.el7.x86_64.rpm
checksum_type: sha256
description:
  Zlib is a general-purpose, patent-free, lossless data compression
  library which is used by many different programs.


